- Effect of Surface Roughness on the Bond Between Ultrahigh-Performance and Precast Concrete in Bridge Deck Connections. Dans: Transportation Research Record: Journal of the Transportation Research Board, v. 2577, n. 1 (janvier 2016). (2016):
- Analytical study on influence of subsurface voids on moment capacity of singly reinforced concrete beam – Inspired by a project case study. Dans: Structures, v. 51 (mai 2023). (2023):
- A new method of estimating equivalent specified compressive strength of existing concrete based on probabilistic modeling of pullout test. Dans: Journal of Building Pathology and Rehabilitation, v. 7, n. 1 (20 novembre 2021). (2021):
- Effect of Declination Angle of Vent Air on Flow Characteristics of a Scale Model of a Down-Fired Utility Boiler with Swirl Burners. Dans: Journal of Energy Engineering, v. 139, n. 4 (décembre 2013). (2013):
- Investigations on Lean Coal Combustion for Different Primary Air Velocities in a Lateral-Ignition Tiny-Oil Burner. Dans: Journal of Energy Engineering, v. 139, n. 4 (décembre 2013). (2013):
- Effects of Overfire Air Ratio on the Aerodynamic Flow Fields of a 350-Megawatt Supercritical Boiler Incorporating Multi-Injection and Multistage Combustion Technology. Dans: Journal of Energy Engineering, v. 141, n. 3 (septembre 2015). (2015):
- Effect of Stoichiometric Ratio of Fuel-Rich Flow on Combustion Characteristics in a Down-Fired Boiler. Dans: Journal of Energy Engineering, v. 143, n. 3 (juin 2017). (2017):
- Effects of OFA Ratio on Coal Combustion and NOx Generation of a 600-MW Downfired Boiler after Changing Air Distribution around Fuel-Rich Flow. Dans: Journal of Energy Engineering, v. 145, n. 1 (février 2019). (2019):
- Numerical Research on the Influence of Declination Angle on Carrying Capacity of Tertiary Air, Ignition, and Combustion Characteristics of Pulverized Coal of 300 MW Down-Fired Utility Boiler with Multi-Injection and Multi-Staging Combustion Technology. Dans: Journal of Energy Engineering, v. 145, n. 6 (décembre 2019). (2019):
- Investigative Assessment of Concrete Slab Using Non-Destructive Evaluation Techniques. Présenté pendant: Structures Congress 2019, Orlando, Florida, 24-27 April 2019. (2019):
- Non-Destructive In-Place Concrete Compressive Strength Estimation Using Post-Installed Concrete Pullout Test—Methodology and Field Experience. Présenté pendant: Structures Congress 2018, Fort Worth, Texas, 19-21 April 2018. (2018):
- (2017): Predicting the drying shrinkage behavior of high strength portland cement mortar under the combined influence of fine aggregate and steel micro fiber. Dans: Materiales de Construccion, v. 67, n. 326 (juin 2017).
- A study on ultrasonic echo tomography for non-destructive evaluation of hardened cementitious concrete. Dans: Journal of Building Pathology and Rehabilitation, v. 5, n. 1 (18 novembre 2019). (2019):
- Influence of silica flour–silica fume combination on the properties of high performance cementitious mixtures at ambient temperature curing. Dans: Construction and Building Materials, v. 100 (décembre 2015). (2015):
- Effect of alkali content of cement on properties of high performance cementitious mortar. Dans: Construction and Building Materials, v. 102 (janvier 2016). (2016):