Zhengqi Li 
- (2016): Effect of Surface Roughness on the Bond Between Ultrahigh-Performance and Precast Concrete in Bridge Deck Connections. In: Transportation Research Record: Journal of the Transportation Research Board, v. 2577, n. 1 (Januar 2016).
- (2023): Analytical study on influence of subsurface voids on moment capacity of singly reinforced concrete beam – Inspired by a project case study. In: Structures, v. 51 (Mai 2023).
- (2021): A new method of estimating equivalent specified compressive strength of existing concrete based on probabilistic modeling of pullout test. In: Journal of Building Pathology and Rehabilitation, v. 7, n. 1 (20 November 2021).
- (2013): Effect of Declination Angle of Vent Air on Flow Characteristics of a Scale Model of a Down-Fired Utility Boiler with Swirl Burners. In: Journal of Energy Engineering, v. 139, n. 4 (Dezember 2013).
- (2013): Investigations on Lean Coal Combustion for Different Primary Air Velocities in a Lateral-Ignition Tiny-Oil Burner. In: Journal of Energy Engineering, v. 139, n. 4 (Dezember 2013).
- (2015): Effects of Overfire Air Ratio on the Aerodynamic Flow Fields of a 350-Megawatt Supercritical Boiler Incorporating Multi-Injection and Multistage Combustion Technology. In: Journal of Energy Engineering, v. 141, n. 3 (September 2015).
- (2017): Effect of Stoichiometric Ratio of Fuel-Rich Flow on Combustion Characteristics in a Down-Fired Boiler. In: Journal of Energy Engineering, v. 143, n. 3 (Juni 2017).
- (2019): Effects of OFA Ratio on Coal Combustion and NOx Generation of a 600-MW Downfired Boiler after Changing Air Distribution around Fuel-Rich Flow. In: Journal of Energy Engineering, v. 145, n. 1 (Februar 2019).
- (2019): Numerical Research on the Influence of Declination Angle on Carrying Capacity of Tertiary Air, Ignition, and Combustion Characteristics of Pulverized Coal of 300 MW Down-Fired Utility Boiler with Multi-Injection and Multi-Staging Combustion Technology. In: Journal of Energy Engineering, v. 145, n. 6 (Dezember 2019).
- (2019): Investigative Assessment of Concrete Slab Using Non-Destructive Evaluation Techniques. Vorgetragen bei: Structures Congress 2019, Orlando, Florida, 24-27 April 2019.
- (2018): Non-Destructive In-Place Concrete Compressive Strength Estimation Using Post-Installed Concrete Pullout Test—Methodology and Field Experience. Vorgetragen bei: Structures Congress 2018, Fort Worth, Texas, 19-21 April 2018.
- (2017): Predicting the drying shrinkage behavior of high strength portland cement mortar under the combined influence of fine aggregate and steel micro fiber. In: Materiales de Construccion, v. 67, n. 326 (Juni 2017).
- (2019): A study on ultrasonic echo tomography for non-destructive evaluation of hardened cementitious concrete. In: Journal of Building Pathology and Rehabilitation, v. 5, n. 1 (18 November 2019).
- (2015): Influence of silica flour–silica fume combination on the properties of high performance cementitious mixtures at ambient temperature curing. In: Construction and Building Materials, v. 100 (Dezember 2015).
- (2016): Effect of alkali content of cement on properties of high performance cementitious mortar. In: Construction and Building Materials, v. 102 (Januar 2016).
Structurae kooperiert mit
