Tong Li 
- : Experimental cyclic testing of masonry pier-spandrel substructures reinforced with engineered cementitious composites overlay. Dans: Bulletin of Earthquake Engineering.
- (2024): Exploring the Benefits of Mass Timber Construction in the Workplace: A Novel Primer for Research. Dans: Buildings, v. 14, n. 7 (2 juillet 2024).
- (2024): Binder mixture proportion optimization and durability of three-dimensional textile reinforced cementitious composites via thermodynamic modeling and experimental analysis. Dans: Construction and Building Materials, v. 436 (juillet 2024).
- (2024): Flexural behavior of textile reinforced mortar-autoclaved lightweight aerated concrete composite panels. Dans: Frontiers of Structural and Civil Engineering, v. 18, n. 5 (mai 2024).
- (2024): Experimental study and theoretical analysis on steel frames infilled high-ductility concrete shear walls. Dans: Construction and Building Materials, v. 434 (juillet 2024).
- (2024): Investigation on thermal performance of recycled brick aggregate concrete structural walls. Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2024): Autoclaved aerated concrete masonry wallettes strengthened using TRC overlay under out-of-plane load. Dans: Journal of Building Engineering, v. 86 (juin 2024).
- (2023): Out-of-plane flexural behavior of autoclaved aerated concrete block masonry walls strengthened with high-ductility concrete. Dans: Construction and Building Materials, v. 394 (août 2023).
- (2024): Half-scale shaking table tests of two brick and wood buildings: Effect of the engineered cementitious composites strips retrofit system. Dans: Structures, v. 59 (janvier 2024).
- (2023): Experimental investigation on the seismic behavior of TRAC frame column with RCA treated by the silica fume cement paste. Dans: Structural Concrete, v. 24, n. 6 (2 novembre 2023).
- (2023): Low-resistance local components design method based on topology optimization: A case study of a duct tee. Dans: Building and Environment, v. 244 (octobre 2023).
- (2023): Optimizing the Buckling Resistance of Injection Molding Composite Plates by Manipulating Gate Locations. Dans: Composite Structures, v. 324 (novembre 2023).
- (2023): Investigation of thermal plume and thermal stratification flow in naturally ventilated spaces with multiple heat sources. Dans: Building and Environment, v. 244 (octobre 2023).
- (2023): Cyclic response of precast concrete columns connected with cast-in-place UHPC in plastic hinge region. Dans: Journal of Building Engineering, v. 65 (avril 2023).
- (2022): Body-temperature programmable ultra-soft shape memory elastomers for comfort fitting. Dans: Smart Materials and Structures, v. 31, n. 10 (30 août 2022).
- (2021): Performance of axially loaded masonry columns confined using textile reinforced concrete (TRC) added with short fibers. Dans: Construction and Building Materials, v. 279 (avril 2021).
- (2022): Disturbance Effect of Blasting Stress Wave on Crack of Rock Mass in Water-Coupled Blasting. Dans: KSCE Journal of Civil Engineering, v. 26, n. 6 (avril 2022).
- (2022): Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing. Dans: Structural Concrete, v. 23, n. 5 (octobre 2022).
- (2022): Morphological and functional polycentric structure assessment of megacity: An integrated approach with spatial distribution and interaction. Dans: Sustainable Cities and Society, v. 80 (mai 2022).
- (2022): Mechanical behavior of RC columns strengthened with thin UHPC jacket under cyclic loads. Dans: Journal of Building Engineering, v. 49 (mai 2022).
- (2022): Experimental study on axial compressive behavior of full-scale masonry columns strengthened with reinforced high ductile concrete (RHDC). Dans: Engineering Structures, v. 252 (février 2022).
- (2022): Effect of splitting bond on shear response of reinforced engineered cementitious composite short columns under cyclic loading. Dans: Engineering Structures, v. 251 (janvier 2022).
- (2021): In-plane behavior of URM wall with openings strengthened with ECC subjected to cyclic load. Dans: Structures, v. 34 (décembre 2021).
- (2021): A novel methodology for the path alignment of visual SLAM in indoor construction inspection. Dans: Automation in Construction, v. 127 (juillet 2021).
- (2021): Effect of eccentricity on strengthening efficiency of bar mesh high ductile concrete (BMHDC) on slender masonry columns. Dans: Engineering Structures, v. 230 (mars 2021).
- (2019): An integrated macro/micro-scale approach for in situ evaluation of matrix cracking in the polymer matrix of cryogenic composite tanks. Dans: Composite Structures, v. 216 (mai 2019).
- (2020): Masonry columns confined with glass textile-reinforced high ductile concrete (TRHDC) jacket. Dans: Engineering Structures, v. 222 (novembre 2020).
- (2020): Compressive performance of masonry columns confined with highly ductile fiber reinforced concrete (HDC). Dans: Construction and Building Materials, v. 254 (septembre 2020).
- (2020): Masonry columns strengthened with bar mesh highly ductile fiber reinforced concrete (BMHDC) jacket under concentric and eccentric loads. Dans: Construction and Building Materials, v. 237 (mars 2020).
- (2018): External Factors Affecting Determination of Mineral Powder Contact Angle with Capillary Rise Method. Dans: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (novembre 2018).
Structurae coopère avec
