Tong Li 
- : Experimental cyclic testing of masonry pier-spandrel substructures reinforced with engineered cementitious composites overlay. In: Bulletin of Earthquake Engineering.
- (2024): Exploring the Benefits of Mass Timber Construction in the Workplace: A Novel Primer for Research. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Binder mixture proportion optimization and durability of three-dimensional textile reinforced cementitious composites via thermodynamic modeling and experimental analysis. In: Construction and Building Materials, v. 436 (July 2024).
- (2024): Flexural behavior of textile reinforced mortar-autoclaved lightweight aerated concrete composite panels. In: Frontiers of Structural and Civil Engineering, v. 18, n. 5 (May 2024).
- (2024): Experimental study and theoretical analysis on steel frames infilled high-ductility concrete shear walls. In: Construction and Building Materials, v. 434 (July 2024).
- (2024): Investigation on thermal performance of recycled brick aggregate concrete structural walls. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Autoclaved aerated concrete masonry wallettes strengthened using TRC overlay under out-of-plane load. In: Journal of Building Engineering, v. 86 (June 2024).
- (2023): Out-of-plane flexural behavior of autoclaved aerated concrete block masonry walls strengthened with high-ductility concrete. In: Construction and Building Materials, v. 394 (August 2023).
- (2024): Half-scale shaking table tests of two brick and wood buildings: Effect of the engineered cementitious composites strips retrofit system. In: Structures, v. 59 (January 2024).
- (2023): Experimental investigation on the seismic behavior of TRAC frame column with RCA treated by the silica fume cement paste. In: Structural Concrete, v. 24, n. 6 (2 November 2023).
- (2023): Low-resistance local components design method based on topology optimization: A case study of a duct tee. In: Building and Environment, v. 244 (October 2023).
- (2023): Optimizing the Buckling Resistance of Injection Molding Composite Plates by Manipulating Gate Locations. In: Composite Structures, v. 324 (November 2023).
- (2023): Investigation of thermal plume and thermal stratification flow in naturally ventilated spaces with multiple heat sources. In: Building and Environment, v. 244 (October 2023).
- (2023): Cyclic response of precast concrete columns connected with cast-in-place UHPC in plastic hinge region. In: Journal of Building Engineering, v. 65 (April 2023).
- (2022): Body-temperature programmable ultra-soft shape memory elastomers for comfort fitting. In: Smart Materials and Structures, v. 31, n. 10 (30 August 2022).
- (2021): Performance of axially loaded masonry columns confined using textile reinforced concrete (TRC) added with short fibers. In: Construction and Building Materials, v. 279 (April 2021).
- (2022): Disturbance Effect of Blasting Stress Wave on Crack of Rock Mass in Water-Coupled Blasting. In: KSCE Journal of Civil Engineering, v. 26, n. 6 (April 2022).
- (2022): Application of engineered cementitious composites in the plastic hinge of reinforced concrete beams for seismic enhancing. In: Structural Concrete, v. 23, n. 5 (October 2022).
- (2022): Morphological and functional polycentric structure assessment of megacity: An integrated approach with spatial distribution and interaction. In: Sustainable Cities and Society, v. 80 (May 2022).
- (2022): Mechanical behavior of RC columns strengthened with thin UHPC jacket under cyclic loads. In: Journal of Building Engineering, v. 49 (May 2022).
- (2022): Experimental study on axial compressive behavior of full-scale masonry columns strengthened with reinforced high ductile concrete (RHDC). In: Engineering Structures, v. 252 (February 2022).
- (2022): Effect of splitting bond on shear response of reinforced engineered cementitious composite short columns under cyclic loading. In: Engineering Structures, v. 251 (January 2022).
- (2021): In-plane behavior of URM wall with openings strengthened with ECC subjected to cyclic load. In: Structures, v. 34 (December 2021).
- (2021): A novel methodology for the path alignment of visual SLAM in indoor construction inspection. In: Automation in Construction, v. 127 (July 2021).
- (2021): Effect of eccentricity on strengthening efficiency of bar mesh high ductile concrete (BMHDC) on slender masonry columns. In: Engineering Structures, v. 230 (March 2021).
- (2019): An integrated macro/micro-scale approach for in situ evaluation of matrix cracking in the polymer matrix of cryogenic composite tanks. In: Composite Structures, v. 216 (May 2019).
- (2020): Masonry columns confined with glass textile-reinforced high ductile concrete (TRHDC) jacket. In: Engineering Structures, v. 222 (November 2020).
- (2020): Compressive performance of masonry columns confined with highly ductile fiber reinforced concrete (HDC). In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Masonry columns strengthened with bar mesh highly ductile fiber reinforced concrete (BMHDC) jacket under concentric and eccentric loads. In: Construction and Building Materials, v. 237 (March 2020).
- (2018): External Factors Affecting Determination of Mineral Powder Contact Angle with Capillary Rise Method. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 11 (November 2018).
Structurae cooperates with
