Shaofei Jiang 
- (2024): Damaged mortise–tenon joint strengthened using an assembled spring–steel hoop based on a design of similar rotational stiffness. Dans: Journal of Building Engineering, v. 95 (octobre 2024).
- (2024): Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure. Dans: Smart Materials and Structures, v. 33, n. 7 (7 juin 2024).
- (2024): Damage identification of non-dispersible underwater concrete columns under compression using impedance technique and stress-wave propagation. Dans: Journal of Civil Structural Health Monitoring, v. 14, n. 7 (mai 2024).
- (2024): Layer jamming skin‐based bionic webbed foot soft gripper with variable stiffness and envelopment. Dans: Composite Structures, v. 341 (août 2024).
- (2019): Bistable morphing composite structures: A review. Dans: Thin-Walled Structures, v. 142 (septembre 2019).
- (2024): Experimental study and numerical simulation of morphing characteristics of bistable laminates embedded with 3D printed shape memory polymers. Dans: Smart Materials and Structures, v. 33, n. 5 (5 avril 2024).
- (2023): Assessment of Soft-First-Floor Structures Reinforced by Rocking Frame Based on Seismic Resilience. Dans: Buildings, v. 14, n. 1 (31 décembre 2023).
- (2023): A high load capacity and efficient-transporting inchworm-like crawling robot with bistable structure and pneumatic networks actuator. Dans: Smart Materials and Structures, v. 32, n. 12 (27 octobre 2023).
- (2023): Compression property and energy absorption capacity of 4D-printed deformable honeycomb structure. Dans: Composite Structures, v. 325 (décembre 2023).
- (2023): Experimental Study and Numerical Simulation of Load-bearing/coiling Characteristics of Thin-walled Lenticular Composite Booms. Dans: Composite Structures, v. 324 (novembre 2023).
- (2023): A novel negative stiffness metamaterials: discrete assembly and enhanced design capabilities. Dans: Smart Materials and Structures, v. 32, n. 9 (21 août 2023).
- (2023): Automatic Detection of Surface Defects on Underwater Pile-Pier of Bridges Based on Image Fusion and Deep Learning. Dans: Structural Control and Health Monitoring, v. 2023 (février 2023).
- (2023): Morphing characteristics and damage analysis of 3D printing variable stiffness bistable laminates based on continuous fiber thermosetting composites. Dans: Composite Structures, v. 315 (juillet 2023).
- (2023): Rapid Three-Dimensional Reconstruction of Underwater Defective Pile Based on Two-Dimensional Images Obtained Using Mechanically Scanned Imaging Sonar. Dans: Structural Control and Health Monitoring, v. 2023 (février 2023).
- (2023): Bistable characteristics of unsymmetric cross-ply composite laminates considering different boundary shapes. Dans: Composite Structures, v. 319 (septembre 2023).
- (2023): Optimization design of stacking sequence and material distribution for variable thickness hybrid composite structure based on improved stacking sequence table. Dans: Composite Structures, v. 307 (mars 2023).
- (2023): Design and analysis of multistable curvilinear-fiber laminates based on continuous fiber 3D printing of thermosetting resin matrix. Dans: Composite Structures, v. 307 (mars 2023).
- (2023): Negative stiffness and buffering characteristics analysis of bistable laminates with initial curing curvature. Dans: Composite Structures, v. 308 (mars 2023).
- (2022): Multistable morphing structures integrated with non-symmetric/antisymmetric-layup connected laminates. Dans: Composite Structures, v. 300 (novembre 2022).
- (2021): Bond behavior of CFRP-concrete bonding interface considering degradation of epoxy primer under wet-dry cycles. Dans: Construction and Building Materials, v. 292 (juillet 2021).
- (2022): Multiple objective optimization design of hybrid composite structures considering multiple-scale uncertainties. Dans: Composite Structures, v. 292 (juillet 2022).
- (2021): Experimental Study of Orthogonal Bistable Laminated Composite Shell Driven by Magnetorheological Elastomer. Dans: Composite Structures, v. 271 (septembre 2021).
- (2021): Multi-objective optimization of controllable configurations for bistable laminates using NSGA-Ⅱ. Dans: Composite Structures, v. 266 (juin 2021).
- (2021): Multiple-scale uncertainty optimization design of hybrid composite structures based on neural network and genetic algorithm. Dans: Composite Structures, v. 262 (avril 2021).
- (2021): Monitoring of corrosion-induced damage to bolted joints using an active sensing method with piezoceramic transducers. Dans: Journal of Civil Structural Health Monitoring, v. 11, n. 2 (janvier 2021).
- (2020): A magneto-active soft gripper with adaptive and controllable motion. Dans: Smart Materials and Structures, v. 30, n. 1 (21 novembre 2020).
- (2020): A novel solar tracking model integrated with bistable composite structures and bimetallic strips. Dans: Composite Structures, v. 248 (septembre 2020).
- (2019): Magnetic actuation bionic robotic gripper with bistable morphing structure. Dans: Composite Structures, v. 229 (décembre 2019).
- (2017): A novel thermo-mechanical anti-icing/de-icing system using bi-stable laminate composite structures with superhydrophobic surface. Dans: Composite Structures, v. 180 (novembre 2017).
- (2019): An origami-inspired cube pipe structure with bistable anti-symmetric CFRP shells driven by magnetic field. Dans: Smart Materials and Structures, v. 28, n. 2 (février 2019).
Structurae coopère avec
