Shaofei Jiang 
- : Effect of manufacturing process parameters on the compression and energy absorption properties of 4D-printed deformable honeycomb structure. In: Smart Materials and Structures.
- : Damage identification of non-dispersible underwater concrete columns under compression using impedance technique and stress-wave propagation. In: Journal of Civil Structural Health Monitoring.
- (2024): Layer jamming skin‐based bionic webbed foot soft gripper with variable stiffness and envelopment. In: Composite Structures, v. 341 (August 2024).
- (2019): Bistable morphing composite structures: A review. In: Thin-Walled Structures, v. 142 (September 2019).
- (2024): Experimental study and numerical simulation of morphing characteristics of bistable laminates embedded with 3D printed shape memory polymers. In: Smart Materials and Structures, v. 33, n. 5 (5 April 2024).
- (2023): Assessment of Soft-First-Floor Structures Reinforced by Rocking Frame Based on Seismic Resilience. In: Buildings, v. 14, n. 1 (31 Dezember 2023).
- (2023): A high load capacity and efficient-transporting inchworm-like crawling robot with bistable structure and pneumatic networks actuator. In: Smart Materials and Structures, v. 32, n. 12 (27 Oktober 2023).
- (2023): Compression property and energy absorption capacity of 4D-printed deformable honeycomb structure. In: Composite Structures, v. 325 (Dezember 2023).
- (2023): Experimental Study and Numerical Simulation of Load-bearing/coiling Characteristics of Thin-walled Lenticular Composite Booms. In: Composite Structures, v. 324 (November 2023).
- (2023): A novel negative stiffness metamaterials: discrete assembly and enhanced design capabilities. In: Smart Materials and Structures, v. 32, n. 9 (21 August 2023).
- (2023): Automatic Detection of Surface Defects on Underwater Pile-Pier of Bridges Based on Image Fusion and Deep Learning. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): Morphing characteristics and damage analysis of 3D printing variable stiffness bistable laminates based on continuous fiber thermosetting composites. In: Composite Structures, v. 315 (Juli 2023).
- (2023): Rapid Three-Dimensional Reconstruction of Underwater Defective Pile Based on Two-Dimensional Images Obtained Using Mechanically Scanned Imaging Sonar. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): Bistable characteristics of unsymmetric cross-ply composite laminates considering different boundary shapes. In: Composite Structures, v. 319 (September 2023).
- (2023): Optimization design of stacking sequence and material distribution for variable thickness hybrid composite structure based on improved stacking sequence table. In: Composite Structures, v. 307 (März 2023).
- (2023): Design and analysis of multistable curvilinear-fiber laminates based on continuous fiber 3D printing of thermosetting resin matrix. In: Composite Structures, v. 307 (März 2023).
- (2023): Negative stiffness and buffering characteristics analysis of bistable laminates with initial curing curvature. In: Composite Structures, v. 308 (März 2023).
- (2022): Multistable morphing structures integrated with non-symmetric/antisymmetric-layup connected laminates. In: Composite Structures, v. 300 (November 2022).
- (2021): Bond behavior of CFRP-concrete bonding interface considering degradation of epoxy primer under wet-dry cycles. In: Construction and Building Materials, v. 292 (Juli 2021).
- (2022): Seismic performance of underwater RC bridge piers strengthened with self-compacting concrete-filled BFRP jacket. In: Structures, v. 39 (Mai 2022).
- (2022): Multiple objective optimization design of hybrid composite structures considering multiple-scale uncertainties. In: Composite Structures, v. 292 (Juli 2022).
- (2021): Experimental Study of Orthogonal Bistable Laminated Composite Shell Driven by Magnetorheological Elastomer. In: Composite Structures, v. 271 (September 2021).
- (2021): Multi-objective optimization of controllable configurations for bistable laminates using NSGA-Ⅱ. In: Composite Structures, v. 266 (Juni 2021).
- (2021): Multiple-scale uncertainty optimization design of hybrid composite structures based on neural network and genetic algorithm. In: Composite Structures, v. 262 (April 2021).
- (2021): Monitoring of corrosion-induced damage to bolted joints using an active sensing method with piezoceramic transducers. In: Journal of Civil Structural Health Monitoring, v. 11, n. 2 (Januar 2021).
- (2020): A magneto-active soft gripper with adaptive and controllable motion. In: Smart Materials and Structures, v. 30, n. 1 (21 November 2020).
- (2020): A novel solar tracking model integrated with bistable composite structures and bimetallic strips. In: Composite Structures, v. 248 (September 2020).
- (2019): Magnetic actuation bionic robotic gripper with bistable morphing structure. In: Composite Structures, v. 229 (Dezember 2019).
- (2017): A novel thermo-mechanical anti-icing/de-icing system using bi-stable laminate composite structures with superhydrophobic surface. In: Composite Structures, v. 180 (November 2017).
- (2019): An origami-inspired cube pipe structure with bistable anti-symmetric CFRP shells driven by magnetic field. In: Smart Materials and Structures, v. 28, n. 2 (Februar 2019).
Structurae kooperiert mit
