- Wire‐and‐Arc Additive Manufacturing for lattice steel structures: overview of the experimental characterization on dot‐by‐dot rods. Dans: ce/papers, v. 6, n. 3-4 (septembre 2023). (2023):
- A Structural Analysis of the Modena Cathedral. Dans: International Journal of Architectural Heritage, v. 10, n. 2-3 (janvier 2016). (2016):
- (2021): Seismic Design and Performances of Frame Structures Connected to a Strongback System and Equipped with Different Configurations of Supplemental Viscous Dampers. Dans: Frontiers in Built Environment, v. 7 (janvier 2021).
- A time domain approach for data interpretation from long‐term static monitoring of historical structures. Dans: Structural Control and Health Monitoring, v. 28, n. 5 (12 avril 2021). (2021):
- (2019): Optimization studies on diagrid columns realized with Wire-and-Arc Additive Manufacturing process. Présenté pendant: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- Seismic design of a precast r.c. structure equipped with viscous dampers. Dans: Earthquakes and Structures, v. 2, n. 3 (septembre 2011). (2011):
- A Special Solution for Lateral-Resisting Systems Capable of Multiple Seismic Performances. Présenté pendant: Structures Congress 2011, Las Vegas, Nevada, April 14-16, 2011. (2011):
- Shaking-table tests of flat-bottom circular silos containing grain-like material. Dans: Earthquake Engineering and Structural Dynamics, v. 45, n. 1 (janvier 2016). (2016):
- Results of pseudo-static tests with cyclic horizontal load on cast in situ sandwich squat concrete walls. Dans: Engineering Structures, v. 54 (septembre 2013). (2013):
- Physically-based prediction of the maximum corner displacement magnification of one-storey eccentric systems. Dans: Bulletin of Earthquake Engineering, v. 11, n. 5 (mars 2013). (2013):
- Peak velocities estimation for a direct five-step design procedure of inter-storey viscous dampers. Dans: Bulletin of Earthquake Engineering, v. 14, n. 2 (octobre 2015). (2015):
- Seismic Modal Contribution Factors. Dans: Bulletin of Earthquake Engineering, v. 13, n. 10 (avril 2015). (2015):
- A statistical study on the peak ground parameters and amplification factors for an updated design displacement spectrum and a criterion for the selection of recorded ground motions. Dans: Engineering Structures, v. 76 (octobre 2014). (2014):
- Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls. Dans: Engineering Structures, v. 76 (octobre 2014). (2014):
- (2016): Seismic horizontal forces exerted by granular material on flat bottom silos: experimental and analytical results. Présenté pendant: IABSE Congress: Challenges in Design and Construction of an Innovative and Sustainable Built Environment, Stockholm, Sweden, 21-23 September 2016.
- (2010): Stiffness-Strength-Ductility Design Approach: an application to a five-storey steel building structure. Présenté pendant: IABSE Symposium: Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, Venice, Italy, 22-24 September 2010.