Massimo Fragiacomo 
- (2024): Aleatoric and epistemic uncertainty in the overstrength of CLT-to-CLT screwed connections. Dans: Engineering Structures, v. 304 (avril 2024).
- (2023): Buckling capacity model for timber screws loaded in compression: Experimental, analytical and FE investigations. Dans: Construction and Building Materials, v. 379 (mai 2023).
- (2021): Assessment of the Seismic Response of CLT Shear Walls Using the EEGBW, a Bouc–Wen Class Predictive Model. Dans: Infrastructures, v. 6, n. 4 (avril 2021).
- (2022): Effect of Pre-Hole Filled with High-Damping Material on the Inelastic Response Spectrum of Integral Abutment Bridges. Dans: Journal of Earthquake Engineering, v. 27, n. 12 (novembre 2022).
- (2022): Effect of Interlayer and Inclined Screw Arrangements on the Load-Bearing Capacity of Timber-Concrete Composite Connections. Dans: Buildings, v. 12, n. 12 (1 décembre 2022).
- (2021): Bayesian estimate of the elastic modulus of concrete box girders from dynamic identification: a statistical framework for the A24 motorway in Italy. Dans: Structure and Infrastructure Engineering, v. 17, n. 12 (novembre 2021).
- (2022): Capacity model of CLT walls with openings and timber plasticization. Dans: Engineering Structures, v. 264 (août 2022).
- (2023): Effect of pinching on structural resilience: performance of reinforced concrete and timber structures under repeated cycles. Dans: Structure and Infrastructure Engineering, v. 19, n. 12 (avril 2023).
- (2021): Dynamic Characterization of Timber Floor Subassemblies: Sensitivity Analysis and Modeling Issues. Dans: Journal of Structural Engineering (ASCE), v. 147, n. 12 (décembre 2021).
- (2021): CLT Shear Walls Anchored with Shear-Tension Angle Brackets: Experimental Tests and Finite-Element Modeling. Dans: Journal of Structural Engineering (ASCE), v. 147, n. 7 (juillet 2021).
- (2021): Correlation approach for the Push-Out and full-size bending short-term performances of timber-to-timber slabs with Self-Tapping Screws. Dans: Engineering Structures, v. 238 (juillet 2021).
- (2019): The architrave a tasselli. Dans: Case Studies in Construction Materials, v. 11 (décembre 2019).
- (2021): Bending Stiffness Identification of Simply Supported Girders using an Instrumented Vehicle: Full Scale Tests, Sensitivity Analysis, and Discussion. Dans: Journal of Bridge Engineering (ASCE), v. 26, n. 1 (janvier 2021).
- (2022): Assessment of Seismic Retrofitting Interventions of a Masonry Palace Using Operational Modal Analysis. Dans: International Journal of Architectural Heritage, v. 16, n. 5 (décembre 2022).
- (2020): Dynamic identification and model updating of full-scale concrete box girders based on the experimental torsional response. Dans: Construction and Building Materials, v. 264 (décembre 2020).
- (2020): Dynamic identification and model updating of an eight-storey CLT building. Dans: Engineering Structures, v. 213 (juin 2020).
- (2021): Assessment of structural interventions using Bayesian updating and subspace-based fault detection methods: the case study of S. Maria di Collemaggio basilica, L’Aquila, Italy. Dans: Structure and Infrastructure Engineering, v. 17, n. 2 (mars 2021).
- (2019): Dynamic identification of a masonry façade from seismic response data based on an elementary Ordinary Least Squares approach. Dans: Engineering Structures, v. 197 (octobre 2019).
- (2020): The 18th-Century Baraccato of L'Aquila. Dans: International Journal of Architectural Heritage, v. 14, n. 6 ( 2020).
- (2015): Comparison between rocking analysis and kinematic analysis for the dynamic out-of-plane behavior of masonry walls. Dans: Earthquake Engineering and Structural Dynamics, v. 44, n. 13 (25 octobre 2015).
- (2015): Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures. Dans: Materials and Structures, v. 48, n. 6 (juin 2015).
- (2008): Connections for composite concrete slab and LVL flooring systems. Dans: Materials and Structures, v. 41, n. 3 (avril 2008).
- (2013): An analytical model for design of reinforcement around holes in Laminated Veneer Lumber (LVL) beams. Dans: Materials and Structures, v. 46, n. 11 (novembre 2013).
- (2013): A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures. Dans: Earthquake Engineering and Structural Dynamics, v. 42, n. 13 (25 octobre 2013).
- (2011): Development of prefabricated timber–concrete composite floor systems. Dans: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 2 (avril 2011).
- (2012): The Design of a Semi-Prefabricated LVL-Concrete Composite Floor. Dans: Advances in Civil Engineering, v. 2012 ( 2012).
- (2016): Application of a Translational Tuned Mass Damper Designed by Means of Genetic Algorithms on a Multistory Cross-Laminated Timber Building. Dans: Journal of Structural Engineering (ASCE), v. 142, n. 4 (avril 2016).
- (2015): Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models. Dans: Journal of Structural Engineering (ASCE), v. 141, n. 11 (novembre 2015).
- (2011): Design of Timber-Concrete Composite Floors for Fire Resistance. Dans: Journal of Structural Fire Engineering, v. 2, n. 3 (septembre 2011).
- (2011): Composite Wood-Concrete Beams Using Utility Poles: Time-Dependent Behavior. Dans: Journal of Structural Engineering (ASCE), v. 137, n. 6 (juin 2011).
Structurae coopère avec
