Massimo Fragiacomo 
- (2024): Aleatoric and epistemic uncertainty in the overstrength of CLT-to-CLT screwed connections. In: Engineering Structures, v. 304 (April 2024).
- (2023): Buckling capacity model for timber screws loaded in compression: Experimental, analytical and FE investigations. In: Construction and Building Materials, v. 379 (Mai 2023).
- (2021): Assessment of the Seismic Response of CLT Shear Walls Using the EEGBW, a Bouc–Wen Class Predictive Model. In: Infrastructures, v. 6, n. 4 (April 2021).
- (2022): Effect of Pre-Hole Filled with High-Damping Material on the Inelastic Response Spectrum of Integral Abutment Bridges. In: Journal of Earthquake Engineering, v. 27, n. 12 (November 2022).
- (2022): Effect of Interlayer and Inclined Screw Arrangements on the Load-Bearing Capacity of Timber-Concrete Composite Connections. In: Buildings, v. 12, n. 12 (1 Dezember 2022).
- (2021): Bayesian estimate of the elastic modulus of concrete box girders from dynamic identification: a statistical framework for the A24 motorway in Italy. In: Structure and Infrastructure Engineering, v. 17, n. 12 (November 2021).
- (2022): Capacity model of CLT walls with openings and timber plasticization. In: Engineering Structures, v. 264 (August 2022).
- (2023): Effect of pinching on structural resilience: performance of reinforced concrete and timber structures under repeated cycles. In: Structure and Infrastructure Engineering, v. 19, n. 12 (April 2023).
- (2021): Dynamic Characterization of Timber Floor Subassemblies: Sensitivity Analysis and Modeling Issues. In: Journal of Structural Engineering (ASCE), v. 147, n. 12 (Dezember 2021).
- (2021): CLT Shear Walls Anchored with Shear-Tension Angle Brackets: Experimental Tests and Finite-Element Modeling. In: Journal of Structural Engineering (ASCE), v. 147, n. 7 (Juli 2021).
- (2021): Correlation approach for the Push-Out and full-size bending short-term performances of timber-to-timber slabs with Self-Tapping Screws. In: Engineering Structures, v. 238 (Juli 2021).
- (2019): The architrave a tasselli. In: Case Studies in Construction Materials, v. 11 (Dezember 2019).
- (2021): Bending Stiffness Identification of Simply Supported Girders using an Instrumented Vehicle: Full Scale Tests, Sensitivity Analysis, and Discussion. In: Journal of Bridge Engineering (ASCE), v. 26, n. 1 (Januar 2021).
- (2022): Assessment of Seismic Retrofitting Interventions of a Masonry Palace Using Operational Modal Analysis. In: International Journal of Architectural Heritage, v. 16, n. 5 (Dezember 2022).
- (2020): Dynamic identification and model updating of full-scale concrete box girders based on the experimental torsional response. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Dynamic identification and model updating of an eight-storey CLT building. In: Engineering Structures, v. 213 (Juni 2020).
- (2021): Assessment of structural interventions using Bayesian updating and subspace-based fault detection methods: the case study of S. Maria di Collemaggio basilica, L’Aquila, Italy. In: Structure and Infrastructure Engineering, v. 17, n. 2 (März 2021).
- (2019): Dynamic identification of a masonry façade from seismic response data based on an elementary Ordinary Least Squares approach. In: Engineering Structures, v. 197 (Oktober 2019).
- (2020): The 18th-Century Baraccato of L'Aquila. In: International Journal of Architectural Heritage, v. 14, n. 6 ( 2020).
- (2015): Comparison between rocking analysis and kinematic analysis for the dynamic out-of-plane behavior of masonry walls. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 13 (25 Oktober 2015).
- (2015): Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures. In: Materials and Structures, v. 48, n. 6 (Juni 2015).
- (2008): Connections for composite concrete slab and LVL flooring systems. In: Materials and Structures, v. 41, n. 3 (April 2008).
- (2013): An analytical model for design of reinforcement around holes in Laminated Veneer Lumber (LVL) beams. In: Materials and Structures, v. 46, n. 11 (November 2013).
- (2013): A component approach for the hysteretic behaviour of connections in cross-laminated wooden structures. In: Earthquake Engineering and Structural Dynamics, v. 42, n. 13 (25 Oktober 2013).
- (2011): Development of prefabricated timber–concrete composite floor systems. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 2 (April 2011).
- (2012): The Design of a Semi-Prefabricated LVL-Concrete Composite Floor. In: Advances in Civil Engineering, v. 2012 ( 2012).
- (2016): Application of a Translational Tuned Mass Damper Designed by Means of Genetic Algorithms on a Multistory Cross-Laminated Timber Building. In: Journal of Structural Engineering (ASCE), v. 142, n. 4 (April 2016).
- (2015): Cyclic Behavior of CLT Wall Systems: Experimental Tests and Analytical Prediction Models. In: Journal of Structural Engineering (ASCE), v. 141, n. 11 (November 2015).
- (2011): Design of Timber-Concrete Composite Floors for Fire Resistance. In: Journal of Structural Fire Engineering, v. 2, n. 3 (September 2011).
- (2011): Composite Wood-Concrete Beams Using Utility Poles: Time-Dependent Behavior. In: Journal of Structural Engineering (ASCE), v. 137, n. 6 (Juni 2011).
Structurae kooperiert mit
