Ramazan Demirboğa
- (2023): Performance of Polypropylene Fiber Reinforced GGBFS-based Alkali Activated Composite under Elevated Temperatures. Dans: Journal of Advanced Concrete Technology, v. 21, n. 7 (7 juillet 2023).
- (2016): Fire resistance of geopolymer concrete produced from Elazığ ferrochrome slag. Dans: Fire and Materials, v. 40, n. 6 (janvier 2016).
- (2013): Characterization of high strength mortars with nano alumina at elevated temperatures. Dans: Cement and Concrete Research, v. 54 (décembre 2013).
- (2013): Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. Dans: Cement and Concrete Research, v. 48 (juin 2013).
- (2004): The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete. Dans: Cement and Concrete Research, v. 34, n. 5 (mai 2004).
- (2023): Performance of polypropylene fiber reinforced GGBFS-based alkali activated composites under sulfate and freeze–thaw conditions. Dans: Materials and Structures, v. 56, n. 2 (7 février 2023).
- (2022): Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments. Dans: Construction and Building Materials, v. 345 (août 2022).
- (2022): Effect of elevated temperatures on mechanical and microstructural properties of alkali-activated mortar made up of POFA and GGBS. Dans: Construction and Building Materials, v. 328 (avril 2022).
- (2021): Impact of fiber reinforcements on properties of geopolymer composites: A review. Dans: Journal of Building Engineering, v. 44 (décembre 2021).
- (2003): Influence of mineral admixtures on thermal conductivity and compressive strength of mortar. Dans: Energy and Buildings, v. 35, n. 2 (février 2003).
- (2020): Assessment of important parameters involved in the synthesis of geopolymer composites: A review. Dans: Construction and Building Materials, v. 264 (décembre 2020).
- (2006): The effects of different cement dosages, slumps and pumice aggregate ratios on the freezing and thawing of concrete. Dans: Computers and Concrete, v. 3, n. 2-3 (avril 2006).
- (2015): Behavior of High-strength Concrete Cylinders Repaired With Cfrp Sheets. Dans: Journal of Civil Engineering and Management, v. 22, n. 1 (décembre 2015).
- (2018): The influence of lightweight aggregate, freezing-thawing procedure and air entraining agent on freezing-thawing damage. Dans: Structural Concrete, v. 19, n. 5 (octobre 2018).
- (2018): The influence of expanded perlite aggregate on compressive strength, linear autogenous shrinkage, restrained shrinkage, heat of hydration of cement‐based materials. Dans: Structural Concrete, v. 19, n. 6 (décembre 2018).
- (2019): Mechanical and physical behavior of cement paste and mortar incorporating nano-CaO. Dans: Structural Concrete, v. 20, n. 1 (février 2019).
- (2010): HSC with Expanded Perlite Aggregate at Wet and Dry Curing Conditions. Dans: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 12 (décembre 2010).
- (2013): Characterization of high strength mortars with nano Titania at elevated temperatures. Dans: Construction and Building Materials, v. 43 (juin 2013).
- (2013): Incorporation of nano TiO2 in black rice husk ash mortars. Dans: Construction and Building Materials, v. 47 (octobre 2013).
- (2013): Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica. Dans: Construction and Building Materials, v. 48 (novembre 2013).
- (2014): The effects of urea on strength gaining of fresh concrete under the cold weather conditions. Dans: Construction and Building Materials, v. 64 (août 2014).
- (2015): Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions. Dans: Construction and Building Materials, v. 76 (février 2015).
- (2015): The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites. Dans: Construction and Building Materials, v. 94 (septembre 2015).
- (2015): Effect of different curing temperatures on alkali activated palm oil fuel ash paste. Dans: Construction and Building Materials, v. 94 (septembre 2015).
- (2015): Development of high strength alkali activated binder using palm oil fuel ash and GGBS at ambient temperature. Dans: Construction and Building Materials, v. 93 (septembre 2015).
- (2015): Effects of nano and micro size of CaO and MgO, nano-clay and expanded perlite aggregate on the autogenous shrinkage of mortar. Dans: Construction and Building Materials, v. 81 (avril 2015).
- (2016): Measurement and prediction of correction factors for very high core compressive strength by using the adaptive neuro-fuzzy techniques. Dans: Construction and Building Materials, v. 122 (septembre 2016).
- (2017): The effect of nano-MgO on the setting time, autogenous shrinkage, microstructure and mechanical properties of high performance cement paste and mortar. Dans: Construction and Building Materials, v. 156 (décembre 2017).
- (2014): Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar. Dans: Construction and Building Materials, v. 72 (décembre 2014).
- (2011): Modeling with ANN and effect of pumice aggregate and air entrainment on the freeze–thaw durabilities of HSC. Dans: Construction and Building Materials, v. 25, n. 11 (novembre 2011).
Structurae coopère avec
