Ramazan Demirboğa
- (2023): Performance of Polypropylene Fiber Reinforced GGBFS-based Alkali Activated Composite under Elevated Temperatures. In: Journal of Advanced Concrete Technology, v. 21, n. 7 (7 Juli 2023).
- (2016): Fire resistance of geopolymer concrete produced from Elazığ ferrochrome slag. In: Fire and Materials, v. 40, n. 6 (Januar 2016).
- (2013): Characterization of high strength mortars with nano alumina at elevated temperatures. In: Cement and Concrete Research, v. 54 (Dezember 2013).
- (2013): Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars. In: Cement and Concrete Research, v. 48 (Juni 2013).
- (2004): The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete. In: Cement and Concrete Research, v. 34, n. 5 (Mai 2004).
- (2023): Performance of polypropylene fiber reinforced GGBFS-based alkali activated composites under sulfate and freeze–thaw conditions. In: Materials and Structures, v. 56, n. 2 (7 Februar 2023).
- (2022): Evaluation of properties of steel fiber reinforced GGBFS-based geopolymer composites in aggressive environments. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Effect of elevated temperatures on mechanical and microstructural properties of alkali-activated mortar made up of POFA and GGBS. In: Construction and Building Materials, v. 328 (April 2022).
- (2021): Impact of fiber reinforcements on properties of geopolymer composites: A review. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2003): Influence of mineral admixtures on thermal conductivity and compressive strength of mortar. In: Energy and Buildings, v. 35, n. 2 (Februar 2003).
- (2020): Assessment of important parameters involved in the synthesis of geopolymer composites: A review. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2006): The effects of different cement dosages, slumps and pumice aggregate ratios on the freezing and thawing of concrete. In: Computers and Concrete, v. 3, n. 2-3 (April 2006).
- (2015): Behavior of High-strength Concrete Cylinders Repaired With Cfrp Sheets. In: Journal of Civil Engineering and Management, v. 22, n. 1 (Dezember 2015).
- (2018): The influence of lightweight aggregate, freezing-thawing procedure and air entraining agent on freezing-thawing damage. In: Structural Concrete, v. 19, n. 5 (Oktober 2018).
- (2018): The influence of expanded perlite aggregate on compressive strength, linear autogenous shrinkage, restrained shrinkage, heat of hydration of cement‐based materials. In: Structural Concrete, v. 19, n. 6 (Dezember 2018).
- (2019): Mechanical and physical behavior of cement paste and mortar incorporating nano-CaO. In: Structural Concrete, v. 20, n. 1 (Februar 2019).
- (2010): HSC with Expanded Perlite Aggregate at Wet and Dry Curing Conditions. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 12 (Dezember 2010).
- (2013): Characterization of high strength mortars with nano Titania at elevated temperatures. In: Construction and Building Materials, v. 43 (Juni 2013).
- (2013): Incorporation of nano TiO2 in black rice husk ash mortars. In: Construction and Building Materials, v. 47 (Oktober 2013).
- (2013): Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): The effects of urea on strength gaining of fresh concrete under the cold weather conditions. In: Construction and Building Materials, v. 64 (August 2014).
- (2015): Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions. In: Construction and Building Materials, v. 76 (Februar 2015).
- (2015): The effects of silica modulus and aging on compressive strength of pumice-based geopolymer composites. In: Construction and Building Materials, v. 94 (September 2015).
- (2015): Effect of different curing temperatures on alkali activated palm oil fuel ash paste. In: Construction and Building Materials, v. 94 (September 2015).
- (2015): Development of high strength alkali activated binder using palm oil fuel ash and GGBS at ambient temperature. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Effects of nano and micro size of CaO and MgO, nano-clay and expanded perlite aggregate on the autogenous shrinkage of mortar. In: Construction and Building Materials, v. 81 (April 2015).
- (2016): Measurement and prediction of correction factors for very high core compressive strength by using the adaptive neuro-fuzzy techniques. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): The effect of nano-MgO on the setting time, autogenous shrinkage, microstructure and mechanical properties of high performance cement paste and mortar. In: Construction and Building Materials, v. 156 (Dezember 2017).
- (2014): Mechanical properties and setting time of ferrochrome slag based geopolymer paste and mortar. In: Construction and Building Materials, v. 72 (Dezember 2014).
- (2011): Modeling with ANN and effect of pumice aggregate and air entrainment on the freeze–thaw durabilities of HSC. In: Construction and Building Materials, v. 25, n. 11 (November 2011).
Structurae kooperiert mit
