Christian Carloni 
- (2024): Largest Experimental Investigation on Size Effect of Concrete Notched Beams. Dans: Journal of Engineering Mechanics (ASCE), v. 150, n. 2 (février 2024).
- (2022): Open Issues on the Investigation of PBO FRCM-Concrete Debonding. Dans: Composite Structures, v. 299 (novembre 2022).
- (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. Dans: Construction and Building Materials, v. 347 (septembre 2022).
- (2022): Tensile Testing of FRCM Coupons for Material Characterization: Discussion of Critical Aspects. Dans: Journal of Composites for Construction, v. 26, n. 4 (août 2022).
- (2022): A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress. Dans: Construction and Building Materials, v. 337 (juin 2022).
- (2021): Concrete columns confined with SRP: Effect of the size, cross-sectional shape and amount of confinement. Dans: Construction and Building Materials, v. 275 (mars 2021).
- (2022): Flexural behavior RC beams strengthened and repaired with SRP composite. Dans: Engineering Structures, v. 258 (mai 2022).
- (2022): An experimental study of the bond behavior of twisted steel bars embedded in mortar cylinders and in the joints of masonry wallettes. Dans: Construction and Building Materials, v. 316 (janvier 2022).
- (2017): An investigation on the "width and size effect" in the evaluation of the fracture energy of concrete. Dans: Procedia Structural Integrity, v. 3 ( 2017).
- (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. Dans: Construction and Building Materials, v. 265 (décembre 2020).
- (2018): Numerical modeling of FRP strips bonded to a masonry substrate. Dans: Composite Structures, v. 200 (septembre 2018).
- (2018): Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints. Dans: Composite Structures, v. 193 (juin 2018).
- (2016): Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. Dans: Composite Structures, v. 142 (mai 2016).
- (2015): Periodic variation of the transferable load at the FRP-masonry interface. Dans: Composite Structures, v. 129 (octobre 2015).
- (2012): Experimental determination of FRP–concrete cohesive interface properties under fatigue loading. Dans: Composite Structures, v. 94, n. 4 (mars 2012).
- (2010): Direct determination of cohesive stress transfer during debonding of FRP from concrete. Dans: Composite Structures, v. 93, n. 1 (décembre 2010).
- (2020): Adhesion between SRP and masonry: Laboratory simulations of the field moisture and salt conditions. Dans: Construction and Building Materials, v. 264 (décembre 2020).
- (2020): Size Effect on Shear Strength of Reinforced Concrete: Is CSCT or MCFT a Viable Alternative to Energy-Based Design Code?. Dans: Journal of Engineering Mechanics (ASCE), v. 146, n. 10 (octobre 2020).
- (2020): Advances in Knowledge of the Fracture Properties of Cohesive Materials: Fired-Clay and Tuff Bricks. Dans: Journal of Engineering Mechanics (ASCE), v. 146, n. 8 (août 2020).
- (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. Dans: Engineering Structures, v. 216 (août 2020).
- (2018): Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: Towards an accelerated laboratory test method. Dans: Construction and Building Materials, v. 175 (juin 2018).
- (2019): Approximate Evaluation of Maximum Force Transferable at FRP-Masonry Interface. Dans: Journal of Composites for Construction, v. 23, n. 6 (décembre 2019).
- (2019): Analytical Bond-Slip Model for Fiber-Reinforced Cementitious Matrix-Concrete Joints Based on Strain Measurements. Dans: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (novembre 2019).
- (2019): Compressive Behavior of Brick Masonry Columns Confined with Steel-Reinforced Grout Jackets. Dans: Journal of Composites for Construction, v. 23, n. 5 (octobre 2019).
- (2019): The role of mortar matrix in the bond behavior and salt crystallization resistance of FRCM applied to masonry. Dans: Construction and Building Materials, v. 209 (juin 2019).
- (2012): FRP-Masonry Debonding: Numerical and Experimental Study of the Role of Mortar Joints. Dans: Journal of Composites for Construction, v. 16, n. 5 (octobre 2012).
- (2015): Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints. Dans: Construction and Building Materials, v. 101 (décembre 2015).
- (2017): Durability of steel FRCM-masonry joints: effect of water and salt crystallization. Dans: Materials and Structures, v. 50, n. 4 (août 2017).
- (2009): Investigation of the Interface Fracture during Debonding between FRP and Masonry. Dans: Advances in Structural Engineering, v. 12, n. 5 (octobre 2009).
- (2016): Flexural behavior of RC beams strengthened with steel-FRCM composite. Dans: Engineering Structures, v. 127 (novembre 2016).
Structurae coopère avec
