Christian Carloni 
- (2024): FRP Strips Externally Bonded to Quasi-Brittle Substrates: Discussions and Advances of Open Research Topics. In: Journal of Composites for Construction, v. 28, n. 6 (Dezember 2024).
- (2024): Largest Experimental Investigation on Size Effect of Concrete Notched Beams. In: Journal of Engineering Mechanics (ASCE), v. 150, n. 2 (Februar 2024).
- (2022): Open Issues on the Investigation of PBO FRCM-Concrete Debonding. In: Composite Structures, v. 299 (November 2022).
- (2022): Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress. In: Construction and Building Materials, v. 337 (Juni 2022).
- (2021): Concrete columns confined with SRP: Effect of the size, cross-sectional shape and amount of confinement. In: Construction and Building Materials, v. 275 (März 2021).
- (2022): Flexural behavior RC beams strengthened and repaired with SRP composite. In: Engineering Structures, v. 258 (Mai 2022).
- (2022): An experimental study of the bond behavior of twisted steel bars embedded in mortar cylinders and in the joints of masonry wallettes. In: Construction and Building Materials, v. 316 (Januar 2022).
- (2017): An investigation on the "width and size effect" in the evaluation of the fracture energy of concrete. In: Procedia Structural Integrity, v. 3 ( 2017).
- (2020): The role of the fiber–matrix interfacial properties on the tensile behavior of FRCM coupons. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2018): Numerical modeling of FRP strips bonded to a masonry substrate. In: Composite Structures, v. 200 (September 2018).
- (2018): Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints. In: Composite Structures, v. 193 (Juni 2018).
- (2016): Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints. In: Composite Structures, v. 142 (Mai 2016).
- (2015): Periodic variation of the transferable load at the FRP-masonry interface. In: Composite Structures, v. 129 (Oktober 2015).
- (2012): Experimental determination of FRP–concrete cohesive interface properties under fatigue loading. In: Composite Structures, v. 94, n. 4 (März 2012).
- (2010): Direct determination of cohesive stress transfer during debonding of FRP from concrete. In: Composite Structures, v. 93, n. 1 (Dezember 2010).
- (2020): Adhesion between SRP and masonry: Laboratory simulations of the field moisture and salt conditions. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Size Effect on Shear Strength of Reinforced Concrete: Is CSCT or MCFT a Viable Alternative to Energy-Based Design Code?. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 10 (Oktober 2020).
- (2020): Advances in Knowledge of the Fracture Properties of Cohesive Materials: Fired-Clay and Tuff Bricks. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 8 (August 2020).
- (2020): Relationship between the effective strain of PBO FRCM-strengthened RC beams and the debonding strain of direct shear tests. In: Engineering Structures, v. 216 (August 2020).
- (2018): Effects of rising damp and salt crystallization cycles in FRCM-masonry interfacial debonding: Towards an accelerated laboratory test method. In: Construction and Building Materials, v. 175 (Juni 2018).
- (2019): Approximate Evaluation of Maximum Force Transferable at FRP-Masonry Interface. In: Journal of Composites for Construction, v. 23, n. 6 (Dezember 2019).
- (2019): Analytical Bond-Slip Model for Fiber-Reinforced Cementitious Matrix-Concrete Joints Based on Strain Measurements. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 11 (November 2019).
- (2019): Compressive Behavior of Brick Masonry Columns Confined with Steel-Reinforced Grout Jackets. In: Journal of Composites for Construction, v. 23, n. 5 (Oktober 2019).
- (2019): The role of mortar matrix in the bond behavior and salt crystallization resistance of FRCM applied to masonry. In: Construction and Building Materials, v. 209 (Juni 2019).
- (2012): FRP-Masonry Debonding: Numerical and Experimental Study of the Role of Mortar Joints. In: Journal of Composites for Construction, v. 16, n. 5 (Oktober 2012).
- (2015): Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints. In: Construction and Building Materials, v. 101 (Dezember 2015).
- (2017): Durability of steel FRCM-masonry joints: effect of water and salt crystallization. In: Materials and Structures, v. 50, n. 4 (August 2017).
- (2009): Investigation of the Interface Fracture during Debonding between FRP and Masonry. In: Advances in Structural Engineering, v. 12, n. 5 (Oktober 2009).
- (2016): Flexural behavior of RC beams strengthened with steel-FRCM composite. In: Engineering Structures, v. 127 (November 2016).
Structurae kooperiert mit
