Karim Benzarti 
- (2024): Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation. Dans: Building and Environment, v. 253 (avril 2024).
- (2022): Probabilistic calibration of environmental reduction and partial safety factors for the design of reinforced concrete beams strengthened by flax fibre reinforced polymers based on two-factor accelerated degradation tests. Dans: Construction and Building Materials, v. 355 (novembre 2022).
- (2022): Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials. Dans: Construction and Building Materials, v. 352 (octobre 2022).
- (2021): Sensitivity analysis of transient heat and moisture transfer in a bio-based date palm concrete wall. Dans: Building and Environment, v. 202 (septembre 2021).
- (2018): Development and Application of FASSTbridge Solution to Jarama bridge (Fast and effective Solution for Steel bridges lifetime extension). Présenté pendant: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2019): Experimental investigation on hygrothermal performance of a bio-based wall made of cement mortar filled with date palm fibers. Dans: Energy and Buildings, v. 202 (novembre 2019).
- (2018): Experimental investigations on the bond behavior between concrete and FRP reinforcing bars. Dans: Construction and Building Materials, v. 173 (juin 2018).
- (2019): Investigation on heat and moisture transfer in bio-based building wall with consideration of the hysteresis effect. Dans: Building and Environment, v. 163 (octobre 2019).
- (2020): Analytical and numerical modeling of the bond behavior between FRP reinforcing bars and concrete. Dans: Construction and Building Materials, v. 231 (janvier 2020).
- (2011): Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): A damage model to predict the durability of bonded assemblies – Part II: Parameter identification and preliminary results for accelerated ageing tests. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): A damage model to predict the durability of bonded assemblies. Part I: Debonding behavior of FRP strengthened concrete structures. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2011): Cement paste–epoxy adhesive interactions. Dans: Construction and Building Materials, v. 25, n. 2 (février 2011).
- (2017): Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete. Dans: Construction and Building Materials, v. 154 (novembre 2017).
- (2015): Qualification of a distributed optical fiber sensor bonded to the surface of a concrete structure: a methodology to obtain quantitative strain measurements. Dans: Smart Materials and Structures, v. 24, n. 11 (novembre 2015).
- (2011): Shearography applied to the non destructive evaluation of bonded interfaces between concrete and CFRP overlays. From the laboratory to the field. Dans: European Journal of Environmental and Civil Engineering, v. 15, n. 4 (janvier 2011).
- (2009): Durability of bonded assemblies. A predictive theory coupling bulk and interfacial damage mechanisms. Dans: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (octobre 2009).
- (2009): Characterization of FRP-to-concrete bonded interface. Description of the single lap shear test. Dans: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (octobre 2009).
- (2018): Hygrothermal characterization of a new bio-based construction material: Concrete reinforced with date palm fibers. Dans: Construction and Building Materials, v. 192 (décembre 2018).
- (2018): Temperature effect on the mechanical behavior of glued-in rods intended for the connection of timber elements. Dans: Construction and Building Materials, v. 186 (octobre 2018).
Structurae coopère avec
