Karim Benzarti 
- : Distributed fiber optic systems – application to strain measurement of post-tensionedconcrete structures. In: European Journal of Environmental and Civil Engineering.
- (2024): Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation. In: Building and Environment, v. 253 (April 2024).
- (2022): Probabilistic calibration of environmental reduction and partial safety factors for the design of reinforced concrete beams strengthened by flax fibre reinforced polymers based on two-factor accelerated degradation tests. In: Construction and Building Materials, v. 355 (November 2022).
- (2022): Mechanical and thermophysical properties of cement mortars including bio-based microencapsulated phase change materials. In: Construction and Building Materials, v. 352 (Oktober 2022).
- (2021): Sensitivity analysis of transient heat and moisture transfer in a bio-based date palm concrete wall. In: Building and Environment, v. 202 (September 2021).
- (2018): Development and Application of FASSTbridge Solution to Jarama bridge (Fast and effective Solution for Steel bridges lifetime extension). Vorgetragen bei: IABSE Symposium: Tomorrow’s Megastructures, Nantes, France, 19-21 September 2018.
- (2019): Experimental investigation on hygrothermal performance of a bio-based wall made of cement mortar filled with date palm fibers. In: Energy and Buildings, v. 202 (November 2019).
- (2018): Experimental investigations on the bond behavior between concrete and FRP reinforcing bars. In: Construction and Building Materials, v. 173 (Juni 2018).
- (2019): Investigation on heat and moisture transfer in bio-based building wall with consideration of the hysteresis effect. In: Building and Environment, v. 163 (Oktober 2019).
- (2020): Analytical and numerical modeling of the bond behavior between FRP reinforcing bars and concrete. In: Construction and Building Materials, v. 231 (Januar 2020).
- (2011): A damage model to predict the durability of bonded assemblies – Part II: Parameter identification and preliminary results for accelerated ageing tests. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): A damage model to predict the durability of bonded assemblies. Part I: Debonding behavior of FRP strengthened concrete structures. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2011): Cement paste–epoxy adhesive interactions. In: Construction and Building Materials, v. 25, n. 2 (Februar 2011).
- (2017): Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete. In: Construction and Building Materials, v. 154 (November 2017).
- (2015): Qualification of a distributed optical fiber sensor bonded to the surface of a concrete structure: a methodology to obtain quantitative strain measurements. In: Smart Materials and Structures, v. 24, n. 11 (November 2015).
- (2011): Shearography applied to the non destructive evaluation of bonded interfaces between concrete and CFRP overlays. From the laboratory to the field. In: European Journal of Environmental and Civil Engineering, v. 15, n. 4 (Januar 2011).
- (2009): Durability of bonded assemblies. A predictive theory coupling bulk and interfacial damage mechanisms. In: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (Oktober 2009).
- (2009): Characterization of FRP-to-concrete bonded interface. Description of the single lap shear test. In: European Journal of Environmental and Civil Engineering, v. 13, n. 9 (Oktober 2009).
- (2018): Hygrothermal characterization of a new bio-based construction material: Concrete reinforced with date palm fibers. In: Construction and Building Materials, v. 192 (Dezember 2018).
- (2018): Temperature effect on the mechanical behavior of glued-in rods intended for the connection of timber elements. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
