Nemkumar Banthia
- (2024): Understanding the dynamic rheological property of cement paste blended with steel slag powder: From interparticle force and physico-chemical parameters of view. Dans: Construction and Building Materials, v. 422 (avril 2024).
- (2024): Sludge-derived biochar as an additive in cement mortar: Mechanical strength and life cycle assessment (LCA). Dans: Construction and Building Materials, v. 425 (avril 2024).
- (2024): Strain-hardening effect on the flexural behavior of ultra-high-performance fiber-reinforced concrete beams with steel rebars. Dans: Developments in the Built Environment, v. 17 (mars 2024).
- (2023): Self-healing capacity of ultra-rapid-hardening fiber-reinforced cementitious composites under tension. Dans: Construction and Building Materials, v. 385 (juillet 2023).
- (2024): Reinforcement bond performance in 3D concrete printing: Explainable ensemble learning augmented by deep generative adversarial networks. Dans: Automation in Construction, v. 158 (février 2024).
- (2023): A state-of-the-art review of active-thermometry techniques for bridge and pipeline scour monitoring, and exploratory passive thermometry studies. Dans: Journal of Structural Integrity and Maintenance, v. 8, n. 2 (3 avril 2023).
- (2005): Properties of confined fibre-reinforced concrete under uniaxial compressive impact. Dans: Cement and Concrete Research, v. 35, n. 1 (janvier 2005).
- (2014): A study of some factors affecting bond in cementitious fiber reinforced repairs. Dans: Cement and Concrete Research, v. 63 (septembre 2014).
- (2022): Robust capacitance sensors for wireless bridge scour monitoring. Dans: Journal of Civil Structural Health Monitoring, v. 13, n. 2-3 (août 2022).
- (2022): Study of the influence of sand on rheological properties, bubble features and buildability of fresh foamed concrete for 3D printing. Dans: Construction and Building Materials, v. 356 (novembre 2022).
- (2022): Size effect of ultra-high-performance concrete under compression: effects of steel fiber characteristics and water-to-binder ratio. Dans: Construction and Building Materials, v. 330 (mai 2022).
- (2022): Strain-hardening fiber reinforced polymer concrete with a low carbon footprint. Dans: Construction and Building Materials, v. 314 (janvier 2022).
- (2020): Use of infrared thermal imaging to detect corrosion of epoxy coated and uncoated rebar in concrete. Dans: Construction and Building Materials, v. 263 (décembre 2020).
- (2015): Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading. Dans: Composite Structures, v. 126 (août 2015).
- (1994): Toughness Characterization of Steel‐Fiber Reinforced Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 6, n. 2 (mai 1994).
- (1994): Steel‐Fiber‐Reinforced Wet‐Mix Shotcrete: Comparisons with Cast Concrete. Dans: Journal of Materials in Civil Engineering (ASCE), v. 6, n. 3 (août 1994).
- (2013): Use of rubberized concrete as a cushion layer in bulletproof fiber reinforced concrete panels. Dans: Construction and Building Materials, v. 41 (avril 2013).
- (2014): Sustainable fiber reinforced concrete for repair applications. Dans: Construction and Building Materials, v. 67 (septembre 2014).
- (2015): Predicting the post-cracking behavior of normal- and high-strength steel-fiber-reinforced concrete beams. Dans: Construction and Building Materials, v. 93 (septembre 2015).
- (2016): Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams. Dans: Construction and Building Materials, v. 121 (septembre 2016).
- (2017): Size-dependent impact resistance of ultra-high-performance fiber-reinforced concrete beams. Dans: Construction and Building Materials, v. 142 (juillet 2017).
- (2018): Water permeability of repair mortars under an applied compressive stress at early ages. Dans: Materials and Structures, v. 51, n. 1 (février 2018).
- (2017): Pull-out behavior of different fibers in geopolymer mortars: effects of alkaline solution concentration and curing. Dans: Materials and Structures, v. 50, n. 1 (février 2017).
- (2012): Shear Strengthening of RC Beams Using Sprayed Glass Fiber Reinforced Polymer. Dans: Advances in Civil Engineering, v. 2012 ( 2012).
- (1990): A study of some factors affecting the fiber–matrix bond in steel fiber reinforced concrete. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 17, n. 4 (août 1990).
- (1994): Properties of steel fiber reinforced shotcrete. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 21, n. 4 (août 1994).
- (2006): Shear strength of reinforced concrete beams with a fiber concrete matrix. Dans: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 6 (juin 2006).
- (2014): Preliminary study on bullet resistance of double-layer concrete panel made of rubberized and steel fiber reinforced concrete. Dans: Materials and Structures, v. 47, n. 1-2 (janvier 2014).
- (2018): Resistance to sulfate attack and underwater abrasion of fiber reinforced cement mortar. Dans: Construction and Building Materials, v. 189 (novembre 2018).
Structurae coopère avec
