Nemkumar Banthia
- (2024): Effect of liquid crystal display glass powder to blast furnace slag ratio on the microstructure and mechanical properties of ultra-high-performance alkali-activated concrete. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): Enhancing time-dependent performance of internally cured self-compacting lightweight concrete. In: Journal of Building Engineering, v. 95 (Oktober 2024).
- (2024): Development of Carbon Consuming Concrete (CCC) using CO2 captured nanobubble water. In: Construction and Building Materials, v. 432 (Juni 2024).
- (2023): Enhanced microstructure and mechanical properties of cementless ultra-high-performance fiber-reinforced alkali-activated concrete with silicon dioxide nanoparticles. In: Construction and Building Materials, v. 398 (September 2023).
- (2018): Effects of fiber geometry and cryogenic condition on mechanical properties of ultra-high-performance fiber-reinforced concrete. In: Cement and Concrete Research, v. 107 (Mai 2018).
- (2020): Assessment of steel fiber corrosion in self-healed ultra-high-performance fiber-reinforced concrete and its effect on tensile performance. In: Cement and Concrete Research, v. 133 (Juli 2020).
- (2023): Development of Ca-rich slag-based ultra-high-performance fiber-reinforced geopolymer concrete (UHP-FRGC): Effect of sand-to-binder ratio. In: Construction and Building Materials, v. 370 (März 2023).
- (2022): Effects of nano-SiO2 coating and induced corrosion of steel fiber on the interfacial bond and tensile properties of ultra-high-performance concrete (UHPC). In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): Effect of synthetic microfiber and viscosity modifier agent on layer deformation, viscosity, and open time of cement mortar for 3D printing application. In: Construction and Building Materials, v. 319 (Februar 2022).
- (2022): Effect of sodium sulfate activation on the early-age matrix strength and steel fiber bond in high volume fly ash (HVFA) cement mortar. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2021): Effect of graphene oxide on single fiber pullout behavior. In: Construction and Building Materials, v. 280 (April 2021).
- (2021): Analytical and experimental study of using recycled tire products in pavement-grade concrete suited for hot weather climates. In: Construction and Building Materials, v. 312 (Dezember 2021).
- (2009): The effect of mechanical stress on permeability of concrete: A review. In: Cement and Concrete Composites, v. 31, n. 4 (April 2009).
- (2016): Effect of fiber orientation on the rate-dependent flexural behavior of ultra-high-performance fiber-reinforced concrete. In: Composite Structures, v. 157 (Dezember 2016).
- (2020): Alkali–Silica Reaction Resistance of Cementitious Material Containing CaCl2-Blended Acrylic Polymer Emulsion. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (März 2020).
- (2019): Effect of rubber insertion on impact behavior of multilayer steel fiber reinforced concrete bulletproof panel. In: Construction and Building Materials, v. 216 (August 2019).
- (2017): Bridge scour monitoring: challenges and opportunities. Vorgetragen bei: IABSE Symposium: Engineering the Future, Vancouver, Canada, 21-23 September 2017.
- (2009): Effect of Particle Density on Its Rebound in Dry-Mix Shotcrete. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 2 (Februar 2009).
- (1994): Carbon and Steel Microfiber‐Reinforced Cement‐Based Composites for Thin Repairs. In: Journal of Materials in Civil Engineering (ASCE), v. 6, n. 1 (Februar 1994).
- (1989): Effect of Early Freezing on Permeability of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 1, n. 3 (August 1989).
- (2017): Experimental and numerical analysis of the flexural response of amorphous metallic fiber reinforced concrete. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (1998): Development of a general model of aggregate rebound for dry-mix shotcrete—(Part II). In: Materials and Structures, v. 31, n. 3 (April 1998).
- (2018): The effects of CaCl2-blended acrylic polymer emulsion on the properties of cement mortar. In: Materials and Structures, v. 51, n. 2 (April 2018).
- (2017): Durability performance of polymeric scrap tire fibers and its reinforced cement mortar. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2017): Effect of SiO2/Al2O3 molar ratio on mechanical behavior and capillary sorption of MK-based alkali-activated composites reinforced with PVA fibers. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2016): Correlating plastic shrinkage cracking potential of fiber reinforced cement composites with its early-age constitutive response in tension. In: Materials and Structures, v. 49, n. 4 (April 2016).
- (2018): Correlating the permeability of mortar under compression with connected porosity and tortuosity. In: Magazine of Concrete Research, v. 70, n. 17 (September 2018).
- (2017): Experimental and numerical study on flexural behavior of ultra-high-performance fiber-reinforced concrete beams with low reinforcement ratios. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 44, n. 1 (Januar 2017).
- (2007): Carbon-fiber-reinforced cement-based sensors. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 34, n. 3 (März 2007).
- (2014): Climate change-induced carbonation of concrete infrastructure. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 167, n. 3 (Juni 2014).
Structurae kooperiert mit
