Selection of Response Reduction Factor Considering Resilience Aspect

The selection of an adequate response reduction factor (R) in the seismic design of a reinforced concrete building is critical to the building’s seismic response. To construct a robust structure, the R factor should be chosen based on the building’s resilience performance. Since no background was provided for the selection of R factors, the study focuses on the right selection of R factors in relation to the building’s functionality, performance level, and resilience. In this study, a high-rise building with multiple R factors (R = 3, 4, 5, and 6) is developed. Five potential recovery paths (RP-1 to RP-5) that matched the realistic scenario were used to estimate the building’s functionality. The building was subjected to uni and bi-directional loadings, and two design levels, Design Basic Earthquake (DBE) and Maximum Considered Earthquake were used to monitor the building’s response. According to the findings, a decrease in the lateral design force with the highest R results in a high ductility requirement and a substantial loss of resilience. The maximum R factor can be recommended under uni-directional loading up to 6, in which the building’s resilience is almost 50%, whereas under bi-directional loading and taking the recommended R factor decreased from 6 to 4.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.