0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

A Rheological Model of Sandstones considering Response to Thermal Treatment

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-9
DOI: 10.1155/2019/2143748
Abstrait:

Time-dependent rheological response of geomaterials to thermal treatment is a crucial issue in geothermal energy utilization and deep mineral mining. This response, however, has not yet been fully considered in the existing rheological constitutive models for sandstones. In order to experimentally investigate such responses and establish the associated rheological constitutive model, this study considers the sandstone specimens which have been thermally treated under different temperatures. The triaxial rheological test in conjunction with the scanning electron microscope is employed in the investigation to observe the mechanically and macro-/micromorphologically rheological response. Investigation results show that the thermal treatment induces microcracks and microdefects, and subsequently, they propagate during the creep. As a consequence, the heterogeneous deformation occurs, and macrocracks are present, leading to the irregular fluctuation and mutation in strain over time. A higher temperature contributes to a more severe structure damage and in turn reduces the intactness of sandstones and elevates the rheological response. The investigation allows successful establishment of a three-dimensional constitutive equation considering the instantaneous elastic response to thermal treatment. Based on the equation, a nonlinear visco-elastoplastic rheological constitutive model is developed for sandstones. Comparison with three existing rheological models shows that the model developed in this study could well represent the rheological process of the thermally treated sandstones.

Copyright: © 2019 Xingang Wang et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10311076
  • Publié(e) le:
    04.04.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine