Optimizing the Support System of a Shallow Buried Tunnel under Unsymmetrical Pressure

In the construction process of tunnel inlet sections, the rock mass can sustain unsymmetrical pressure due to asymmetrical terrain on the two sides of the tunnel. The fact that the inlet sections are usually under shallow buried conditions with strongly weathered rock mass exacerbates the issue. This paper discusses optimization strategies of the initial support of a shallow buried tunnel based on the analytical results of asymmetrical loading characteristics. Numerical simulation is performed with particle flow code (PFC) using the Jianshanji tunnel project as an example. The simulation results show that the bench excavation has slightly less total deformation than the full-section excavation but the deformation range is wider, especially in the tunnel arch. Both lining support and slope reduction treatments can effectively improve rock deformation, with lining support demonstrating better performance in controlling deformation and adjusting stress distribution. Based on the simulation results, the bench excavation and lining support are used in the actual project, and the corresponding optimization control measures were adopted to address deformation issues, including crushed-stone backfilling for compression resistance, advanced grouting reinforcement, and grouting. The field data show that the tunnel stability is effectively improved by adopting the optimization schemes, which further validates the effectiveness of the proposed unsymmetrical control method.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.