In Situ Study on Vertical Compressive Bearing Characteristics of Rooted Bored Piles

In situ vertical load field tests were carried out on two bored piles used in the Chizhou Highway Bridge across the Yangtze River, both of which were rooted piles. Based on the test results, such as those on the relationship between the load and settlement, axial force distribution, and the relationship between shaft friction and pile–soil relative displacement, the vertical load transfer mechanics of the rooted piles were analyzed. The results showed that the load-carrying curves of the rooted piles vary gradually and also that the rooted piles exhibit the bearing characteristics of friction piles because the loads at the pile tips are less than 15% of the total bearing capacity of the piles. The slope of the axial force distribution curve of the rooted piles first increased at the upper interface and then decreased at the lower interface of the root-reinforced zone. The axial force of the rooted piles decreased faster in soil layers where the piles had roots, which can be explained by the fact that roots share the vertical load with piles and that roots improve the bearing properties of piles. Considering the shaft and end resistance of the roots on the piles, the relationship between load and settlement of the rooted piles was calculated by a three-line model based on the load transfer method. The results calculated from the model were in good agreement with the results from the tests. The results from the tests could inform the design and analysis of rooted piles.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.