0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

The Impact of Building Morphology on Energy Use Intensity of High-Rise Residential Clusters: A Case Study of Hangzhou, China

Auteur(s):


ORCID



Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 7, v. 14
Page(s): 2245
DOI: 10.3390/buildings14072245
Abstrait:

Building operations account for a large amount of energy use and CO₂ emissions, and the morphology of buildings in residential clusters strongly impacts energy efficiency performance. However, little research has focused on the morphology and energy electricity usage of high-rise residential clusters in hot summer and cold winter (HSCW) regions. We investigated 96 residential clusters in Hangzhou, China, and established a corresponding morphology database. Additionally, we obtained annual electricity consumption for 16 of these residential clusters. With this database, we performed optimization of morphological parameters upon energy use intensity (EUI) using a genetic algorithm (GA). Specifically, the cooling, heating, and lighting EUIs of high-rise residential clusters were studied. After implementing the optimized morphological parameters, there was a reduction of up to 7.73% in EUI. According to regression analysis, the average aspect ratio was the most significant factor influencing EUI (r = −0.907), followed by floor area ratio (r = −0.755), average orientation (r = 0.502), and average number of floors (r = −0.453). These results indicate that a higher intensity of land development with a greater floor area ratio, average aspect ratio, and average number of floors can reduce total energy consumption. Additionally, we found that an average building orientation of southwest 15° (with respect to south) is optimal. The findings of this study can assist urban planners and designers in developing more sustainable residential clusters, leading to decreased energy costs and CO₂ emissions.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10795590
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine