• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

  1. in Cement and Concrete Research, v. 12 (1974), p. 72
  2. in Building Research Establishment Information Paper, v. 7 (1987)
  3. in Bulletin of the Chinese Ceramic Society, v. 33 (2014), p. 15
  4. "Effect of High Levels of Fines Content on Concrete Properties" in ACI Materials Journal, v. 103, n. 6, American Concrete Institute

    https://doi.org/10.14359/18226

  5. in Journal of Applied Sciences Research, v. 3 (2007), p. 202
  6. Deng Wenni (2018), "Investigating the Factors Affecting the Properties of Coral Sand Treated with Microbially Induced Calcite Precipitation" in Advances in Civil Engineering, v. 2018, Hindawi Limited, p. 1-6

    https://doi.org/10.1155/2018/9590653

  7. Ma Linjian (2020), "Dynamic compressive properties of dry and saturated coral rocks at high strain rates" in Engineering Geology, v. 272, Elsevier BV, p. 105615

    https://doi.org/10.1016/j.enggeo.2020.105615

  8. in Chinese Journal of Rock Mechanics and Engineering, v. 37 (2018), p. 1520
  9. Yu Xiao (2019), "Determination of attenuation effects of coral sand on the propagation of impact-induced stress wave" in International Journal of Impact Engineering, v. 125, Elsevier BV, p. 63-82

    https://doi.org/10.1016/j.ijimpeng.2018.11.004

  10. in Engineering Mechanics, v. 36 (2019), p. 44
  11. Lv Yaru (2020), "Particle breakage of calcareous sand at high strain rates" in Powder Technology, v. 366, Elsevier BV, p. 776-787

    https://doi.org/10.1016/j.powtec.2020.02.062

  12. Lv Yaru (2019), "One-dimensional dynamic compressive behavior of dry calcareous sand at high strain rates" in Journal of Rock Mechanics and Geotechnical Engineering, v. 11, n. 1, Elsevier BV, p. 192-201

    https://doi.org/10.1016/j.jrmge.2018.04.013

  13. Wang Luoxin (2020), "Mechanical Properties and Microscopic Mechanism of Coral Sand-Cement Mortar" in Advances in Materials Science and Engineering, v. 2020, Hindawi Limited, p. 1-11

    https://doi.org/10.1155/2020/4854892

  14. Fang Qin (2014), "An algorithm for the grain-level modelling of a dry sand particulate system" in Modelling and Simulation in Materials Science and Engineering, v. 22, n. 5, IOP Publishing, p. 055021

    https://doi.org/10.1088/0965-0393/22/5/055021

  15. in Journal of Soil Mechanics & Foundations Division, v. 96 (1970)
  16. in Computer-Aided Design, v. 8 (1976)
  17. in Journal of Geotechnical and Geoenvironmental Engineering, v. 101 (1975), p. 1037
  18. Lade Poul V. (1977), "Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces" in International Journal of Solids and Structures, v. 13, n. 11, Elsevier BV, p. 1019-1035

    https://doi.org/10.1016/0020-7683(77)90073-7

  19. in International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, v. 26 (1989)
  20. in Journal of Engineering Mechanics, v. 97 (1971)
  21. in Studies in Applied Mechanics, v. 7 (1983)
  22. Dafalias, Yannis F. (1986): Bounding Surface Plasticity. I: Mathematical Foundation and Hypoplasticity. Dans: Journal of Engineering Mechanics (ASCE), v. 112, n. 9 (septembre 1986).

    https://doi.org/10.1061/(ASCE)0733-9399(1986)112:9(966)

  23. Wu Wei (1994), "A simple hypoplastic constitutive model for sand" in International Journal for Numerical and Analytical Methods in Geomechanics, v. 18, n. 12, Wiley, p. 833-862

    https://doi.org/10.1002/nag.1610181203

  24. Jefferies M. G. (1993), "Nor-Sand: a simle critical state model for sand" in Géotechnique, v. 43, n. 1, Thomas Telford Ltd., p. 91-103

    https://doi.org/10.1680/geot.1993.43.1.91

  25. Wu Wei (1996), "Hypoplastic constitutive model with critical state for granular materials" in Mechanics of Materials, v. 23, n. 1, Elsevier BV, p. 45-69

    https://doi.org/10.1016/0167-6636(96)00006-3

  26. Li X. S. (2002), "A sand model with state-dapendent dilatancy" in Géotechnique, v. 52, n. 3, Thomas Telford Ltd., p. 173-186

    https://doi.org/10.1680/geot.2002.52.3.173

  27. Manzari M. T. (1997), "A critical state two-surface plasticity model for sands" in Géotechnique, v. 47, n. 2, Thomas Telford Ltd., p. 255-272

    https://doi.org/10.1680/geot.1997.47.2.255

  28. in International Journal for Numerical and Analytical Methods in Geomechanics, v. 22 (1998), p. 621

    https://doi.org/10.1002/(SICI)1096-9853(199808)22:8<621::AID-NAG937>3.0.CO;2-8

  29. Ma Linjian (2019), "Effects of size and loading rate on the mechanical properties of single coral particles" in Powder Technology, v. 342, Elsevier BV, p. 961-971

    https://doi.org/10.1016/j.powtec.2018.10.037

  30. "Test method for specific gravity of soil solids by gas pycnometer. ASTM standard D5550–14"
  31. "Test methods for maximum index density and unit weight of soils using a vibratory table"
  32. Jin Yinfu (2015), "Unified modeling of the monotonic and cyclic behaviors of sand and clay" in Acta Mechanica Solida Sinica, v. 28, n. 2, Springer Science and Business Media LLC, p. 111-132

    https://doi.org/10.1016/s0894-9166(15)30001-x

  33. in Protective Engineering, v. 40 (2018), p. 35
  34. Fonseca J. (2013), "Micromechanisms of inelastic deformation in sandstones: an insight using x-ray micro-tomography" in Géotechnique Letters, v. 3, n. 2, Thomas Telford Ltd., p. 78-83

    https://doi.org/10.1680/geolett.13.034

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10429529
  • Publié(e) le:
    14.08.2020
  • Modifié(e) le:
    14.08.2020