0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Disintegration Characteristics Investigation of Carbonaceous Shale in High-Latitude Cold Regions

Auteur(s): ORCID




Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 2, v. 13
Page(s): 466
DOI: 10.3390/buildings13020466
Abstrait:

To investigate the disintegration and microstructure characteristics of carbonaceous shale in high-latitude cold regions, indoor, outdoor, initial particle size, and freeze–thaw disintegration experiments were conducted concerning dry–wet cycles. Two tests were performed: sieving and microscopic scanning electron analysis. The carbonaceous shale disintegration, particle size variation rule, disintegration resistance, and fractal characteristics were studied. The microstructure variations of carbonaceous rock before and after water immersion were compared, and the microscopic mechanism of calving in water was discussed. The results show that: (1) the disintegration of carbonaceous shale is basically achieved after eight dry–wet cycles, and the particle size is concentrated at 2 mm~10 mm; (2) the temperature and freeze–thaw cycle conditions accelerated the disintegration rate and shortened the disintegration stability time of carbonaceous shale; (3) there is a negative correlation between the disintegration resistance index and the disintegrating fractal dimension of carbonaceous shale, and the disintegration resistance of disintegrating carbonaceous shale can be indirectly characterized by the fractional dimension; (4) carbonaceous shale contains two hydrophilic clay particles, kaolinite and montmorillonite, and the difference between the lattice expansion of clay particles, the expansion of adsorbed water film, and mineral dissolution are the main factors leading to the disintegration of carbonaceous rock.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10712422
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine