0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Composites Based on Alternative Raw Materials at High Temperature Conditions

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Periodica Polytechnica Civil Engineering
DOI: 10.3311/ppci.9820
Abstrait:

This paper presents newly developed polymer-cement composites.The primary binder (cement) was partially substituted byuse of blast-furnace slag and high-temperature fly ash. A lightweightaggregate – agloporite (grain size in range 1–2 mm) wasused among other components. This porous aggregate is producedfrom energy by-products (fly ash). Attention was focusedon the behavior of the composites when exposed to elevatedtemperatures (400 °C–1,000°C). The influence of several differentmethods of temperature decrease was assessed – slow(in furnace 1°C/min) and rapid (laboratory ambient 22°C andwater bath 18°C). Specific dimensional changes were determined,including strength characteristics and bulk density.Structural deterioration and microstructural changes of selectedspecimens were investigated by analytical techniques (SEM andCT). Compressive and bending tensile strength changed variouslydepending on temperature changes, including severalcooling conditions. Deterioration reactions (especially cracks)which were formed in investigated composite structures correspondedwith results of physico-mechanical testing. That wasconfirmed by using the CT and SEM.The fact that the agloporite has a positive effect on thermalresistance of developed polymer-cement composites wasproved. Almost no cracks or other failures were identified (byusing CT and SEM) in interfacial transition zones of agloporiteafter thermal stress. This indicates very good bond adhesionbetween the matrix and the porous aggregates during extremetemperature conditions (in case of different cooling methods).

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.3311/ppci.9820.
  • Informations
    sur cette fiche
  • Reference-ID
    10536656
  • Publié(e) le:
    01.01.2021
  • Modifié(e) le:
    19.02.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine