0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Bio-Inspired Impregnations of Carbon Rovings for Tailored Bond Behavior in Carbon Fiber Reinforced Concrete

Auteur(s): ORCID
ORCID
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 12, v. 13
Page(s): 3102
DOI: 10.3390/buildings13123102
Abstrait:

Nature provides various templates for integrating organic and inorganic materials to create high-performance composites. Biological structures such as nacre and the structural elements of the glass sponge are built up in layers, leading to remarkable fracture toughness. In this work, the brick-and-mortar and layer-by-layer structures found in these biological examples have been abstracted and implemented by using an aqueous polymer dispersion in combination with nanoclay particles and sodium water glass. These dispersions were used as impregnation of carbon rovings in order to form bio-inspired contact zones towards the concrete matrix. The bonding behavior was investigated using the Yarn Pull-Out (YPO) test, and a beneficial behavior of the layered polymer–nanoclay dispersions was observed. Thermogravimetric analysis (TGA) was used to determine the organic impregnation content of the roving. Further, light microscopy of the roving cross-sections prior to YPO and visual analyses of the fractured contact zone of split concrete specimens provided information on the quality of the impregnation and the interaction with the concrete matrix.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10754330
  • Publié(e) le:
    14.01.2024
  • Modifié(e) le:
    07.02.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine