• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil


The Bearing and Breakage Characteristics of Crushed Stone Aggregates in the Bedding Course of Permeable Roads


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-9
DOI: 10.1155/2020/8890672

The current study of permeable roads helps address urban flooding in Chinese cities caused by frequent heavy rainfall and build smart cities with sponge-like functionality. Crushed stone is widely used in constructing the bedding course of permeable roads because it has good water permeability. Experiments on the compaction of crushed stone were carried out by considering the impact of particle size and gradation to examine the strength and particle breakage characteristics of crushed stone and evaluate its use as the aggregate in the bedding course of permeable roads. The compaction process can be divided into two stages, i.e., the preliminary compaction stage and the particle crushing and intensive compaction stage. The latter consists of an alternating cycle of compacting and crushing. The particle size distribution after crushing can be described analogously to the Talbot continuous gradation equation. Single particle size samples are subject to earlier and stronger particle breakage than the mixed particle size sample, which are affected by both compaction level and loading speed. This study has important application value, and it provides experimental support for the study of materials for urban permeable roads.

Copyright: © Zhongbing Cai and Chengchun Qiu et al.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
  • Publié(e) le:
  • Modifié(e) le:
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine