Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

IABSE Colloquium Stockholm 1986

Données bibliographiques

Médium:	actes de congrès
Langue(s):	allemand, anglais, français
Editeur:	International Association for Bridge and Structural Engineering (IABSE)
Publié à:	Zurich, Suisse
Conférence:	IABSE Colloquium: Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau, Stockholm (Sweden), 1986
Page(s):	472
Année:	1986
Collection:	IABSE Reports (No. 49)
Acheter chez:

Articles

Auteur(s)	Titre	Page(s)
Abdel-Sayed, George	Ultimate strength of composite cold-formed steel-concrete columns
Akoussah, Esenam	Stability of column-girt-diaphragm systems in industrial buildings
Bankvall, Claes G.	Building physics for light-gauge construction
Benussi, Fausto	Half-barrel shells composed of cold-formed profiles
Bergfelt, Allan	Buckling of trapezoidally corrugated webs and panels
Boggard, André Van Den	Distortion and warping of profiled metal sheeting in shear
Bródka, Jan	Basis of new polish recommendations for stressed skin design
Bryan, Eric R.	Cold-formed steel structures and new British code of practice
Bulson, Philip S.	New British code for the design of aluminium structures
Chong, Ken P.	Sandwich panels with cold-formed thin facings
Cothren, Stanley M.	Field coating of existing thin-walled metal structures
Crisinel, Michel	Behaviour of steel deck reinforced composite floors
Davies, J. Michael	Design of cold-formed steel purlins
Davies, J. Michael	Full scale tests and analysis of two light gauge steel pyramid roofs
Djubek, Jozef	Design of slender webs in steel structures
Fernezelyi, Sándor	Postcritical behaviour of thin aluminium plates
Goczek, Jerzy	Limit state of a thin-walled rectangular hollow beam-column
Hassinen, Paavo	Compression strength of the profiled face in sandwich panels
Heselius, Lars	Elastically braced light gauge beams with open sections
Höglund, Ingemar	Additional insulation of flat roofs with thin-walled metal structures
Höglund, Torsten	Load bearing strength of sandwich panel walls with window openings
Johannesson, Gudni	Thermal bridges in sheet metal construction
Johansson, Germund	Built up roofs - wind uplift resistance
Johansson, Germund	Insulated roofs with two layer steel sheets
Johansson, Germund	Single load on trapezoidal steel sheet
Jolly, Colin K.	Shear strength of unwelded shear connectors for composite beams
Jumppanen, Ulla-Maija	Sheet steel - mineral wool fire protection in steel columns
Kato, Ben	Stainless steel membrane roof
König, Jürgen	Versuche zur Strukturdämpfung in Decken aus kaltgeformten Blechen
LaBoube, Roger A.	Roof panel to purlin connection: rotational restraint factor
Lindner, Joachim	Torsional restraint coefficients of profiled sheeting
Maquoi, René	From thick to thin or from thin to thick?
Melcher, Jindřich	Behaviour of thin-walled corrugated sheets and restrained beams
Moore, David	Non-linear behaviour of thin-walled sections
Moore, David	Tests on full-scale cold formed steel roofing systems
Murray, Thomas M.	Study of thin-walled metal building roof systems using scale models
Ohlsson, Sven	Stiffness criteria and dynamic serviceability of light-weight steel floors
Ono, Tetsuro	Development and ultimate strength test of new steel gable roof structure
Ono, Tetsuro	Inelastic behaviour and earthquake-resistance design method for thin-walled metal structures
Pekoz, Teoman	Combined axial load and bending in cold-formed steel members
Ramsden, Jonathan A.	Light gauge structural panel for composite flooring
Rondal, Jacques	Colonnes tubulaires à parois minces remplies de béton
Schmidt, Herbert	New concept of economic and fire-resistant profiled steel sheet floors
Souza, Marco Antonio	Relevant dynamic effects in the design of thin-walled structures
Stark, Jan	Long span composite slabs
Takahashi, Kunihiro	Distortion of thin-walled open cross section members
Tomasetti, Richard L.	Development of thin wall cladding to reduce drift in hi-rise buildings
Tsai, Yung-Min	Moment redistribution in continuous profiled steel sheeting
Vaes, Felix	Condesation in roofs with thin-walled metal sheets
Völkel, Gerhard	Biege- und Membrantragwirkung von ebenen Fassadenelementen unter Windlasten
Wang, Shi-Ji	Torsional-flexural buckling of partially closed thin-walled columns
White, Richard N.	Diaphragm action in aluminium-clad timber-framed buildings
Witte, Horst	Brandsicherheit bei Dächern und Wänden aus Stahltrapezprofilen
Wright, Howard D.	Behaviour of profiled sheeting during composite floor construction
Yener, Muzaffer	Spacing of connections in thin-walled compression elements
Zhang, Zhong-Quan	Use of cold-formed steel in the building industry of China

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant.

Informations
sur cette fiche
Reference-ID
10544462
Publié(e) le:
13.01.2021
Modifié(e) le:
30.04.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

IABSE Colloquium Stockholm 1986

Articles

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

IABSE Colloquium Stockholm 1986

Articles

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.