Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

Medium:

Tagungsband

Sprache(n):

Deutsch, Englisch, Französisch

Verlag:

International Association for Bridge and Structural Engineering (IABSE)

Veröffentlicht in:

Zürich, Schweiz

Tagung:

IABSE Colloquium: Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau, Stockholm (Sweden), 1986

Seite(n):

472

Jahr:

1986

Reihe:

IABSE Reports (Nr. 49)

Bestellbar bei:

Autor(en)

Titel

Seite(n)

Abdel-Sayed, George

Ultimate strength of composite cold-formed steel-concrete columns

Akoussah, Esenam

Stability of column-girt-diaphragm systems in industrial buildings

Bankvall, Claes G.

Building physics for light-gauge construction

Benussi, Fausto

Half-barrel shells composed of cold-formed profiles

Bergfelt, Allan

Buckling of trapezoidally corrugated webs and panels

Boggard, André Van Den

Distortion and warping of profiled metal sheeting in shear

Bródka, Jan

Basis of new polish recommendations for stressed skin design

Bryan, Eric R.

Cold-formed steel structures and new British code of practice

Bulson, Philip S.

New British code for the design of aluminium structures

Chong, Ken P.

Sandwich panels with cold-formed thin facings

Cothren, Stanley M.

Field coating of existing thin-walled metal structures

Crisinel, Michel

Behaviour of steel deck reinforced composite floors

Davies, J. Michael

Design of cold-formed steel purlins

Davies, J. Michael

Full scale tests and analysis of two light gauge steel pyramid roofs

Djubek, Jozef

Design of slender webs in steel structures

Fernezelyi, Sándor

Postcritical behaviour of thin aluminium plates

Goczek, Jerzy

Limit state of a thin-walled rectangular hollow beam-column

Hassinen, Paavo

Compression strength of the profiled face in sandwich panels

Heselius, Lars

Elastically braced light gauge beams with open sections

Höglund, Ingemar

Additional insulation of flat roofs with thin-walled metal structures

Höglund, Torsten

Load bearing strength of sandwich panel walls with window openings

Johannesson, Gudni

Thermal bridges in sheet metal construction

Johansson, Germund

Built up roofs - wind uplift resistance

Johansson, Germund

Insulated roofs with two layer steel sheets

Johansson, Germund

Single load on trapezoidal steel sheet

Jolly, Colin K.

Shear strength of unwelded shear connectors for composite beams

Jumppanen, Ulla-Maija

Sheet steel - mineral wool fire protection in steel columns

Kato, Ben

Stainless steel membrane roof

König, Jürgen

Versuche zur Strukturdämpfung in Decken aus kaltgeformten Blechen

LaBoube, Roger A.

Roof panel to purlin connection: rotational restraint factor

Lindner, Joachim

Torsional restraint coefficients of profiled sheeting

Maquoi, René

From thick to thin or from thin to thick?

Melcher, Jindřich

Behaviour of thin-walled corrugated sheets and restrained beams

Moore, David

Non-linear behaviour of thin-walled sections

Moore, David

Tests on full-scale cold formed steel roofing systems

Murray, Thomas M.

Study of thin-walled metal building roof systems using scale models

Ohlsson, Sven

Stiffness criteria and dynamic serviceability of light-weight steel floors

Ono, Tetsuro

Development and ultimate strength test of new steel gable roof structure

Ono, Tetsuro

Inelastic behaviour and earthquake-resistance design method for thin-walled metal structures

Pekoz, Teoman

Combined axial load and bending in cold-formed steel members

Ramsden, Jonathan A.

Light gauge structural panel for composite flooring

Rondal, Jacques

Colonnes tubulaires à parois minces remplies de béton

Schmidt, Herbert

New concept of economic and fire-resistant profiled steel sheet floors

Souza, Marco Antonio

Relevant dynamic effects in the design of thin-walled structures

Stark, Jan

Long span composite slabs

Takahashi, Kunihiro

Distortion of thin-walled open cross section members

Tomasetti, Richard L.

Development of thin wall cladding to reduce drift in hi-rise buildings

Tsai, Yung-Min

Moment redistribution in continuous profiled steel sheeting

Vaes, Felix

Condesation in roofs with thin-walled metal sheets

Völkel, Gerhard

Biege- und Membrantragwirkung von ebenen Fassadenelementen unter Windlasten

Wang, Shi-Ji

Torsional-flexural buckling of partially closed thin-walled columns

White, Richard N.

Diaphragm action in aluminium-clad timber-framed buildings

Witte, Horst

Brandsicherheit bei Dächern und Wänden aus Stahltrapezprofilen

Wright, Howard D.

Behaviour of profiled sheeting during composite floor construction

Yener, Muzaffer

Spacing of connections in thin-walled compression elements

Zhang, Zhong-Quan

Use of cold-formed steel in the building industry of China

Anzeige

Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

IABSE Colloquium Stockholm 1986

Artikel

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Thin-Walled Metal Structures in Buildings = Structures métalliques à parois minces dans les bâtiments = Dünnwandige Metall-Konstruktionen im Hochbau

IABSE Colloquium Stockholm 1986

Artikel

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.