Computational Mechanics of Concrete Structures - Advances and Applications

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Données bibliographiques

Médium:	actes de congrès
Langue(s):	anglais
Editeur:	International Association for Bridge and Structural Engineering (IABSE)
Publié à:	Zurich, Suisse
Conférence:	IABSE Colloquium: Computational Mechanics of Concrete Structures - Advances and Applications, Delft, Netherlands, 1987
Page(s):	617
Année:	1987
Collection:	IABSE Reports (No. 54)
Acheter chez:

Articles

Auteur(s)	Titre	Page(s)
Acker, Paul	Modelling thermal and hygrometric effects in concrete
Arnesen, A.	Large-scale analysis of gravity platforms
Balakrishnan, S.	Prediction of response of concrete beams and panels by nonlinear finite element analysis
Bazant, Zdenek P.	Nonstationary long-time processes causing loss of serviceability
Bazant, Zdenek P.	Tests of size effect in pull-out of reinforcing bars from concrete
Blaauwendraad, J.	Discrete element method and beam dynamics, an application of TILLY
Bogert, Peter A.J. Van Den	Simulation of the mechanical behaviour of young concrete
Borst, René De	Stability and uniqueness in numerical modelling of concrete structures
Calvi, Gian Michele	Numerical models for the non-linear analysis of prestressed concrete frames
Cohn, M.Z.	Constitutive laws of structural concrete for application to nonlinear analysis
Crisfield, Michael A.	Numerical comparisons involving different 'concrete-models'
Cross, Graham	Ultimate shear design from non-linear finite element analysis
Dragosavic, Mato	Modelling of bond
Eberhardsteiner, J.	Comparison of constitutive models for triaxially loaded concrete
Eibl, Josef	Numerical analysis of thick reinforced concrete slabs under impact loading
Frénay, Jerome	Time-dependent shear transfer of cracked reinforced concrete
Gambarova, Pietro G.	Modelling of interface problems in reinforced concrete
Hordijk, Dirk A.	Finite element supported fracture testing of concrete
Inoue, Norio	Analysis of reinforced concrete members subjected to cyclic loads
Isenberg, Jeremy	Analysis of reinforced concrete structures in design applications
Jian-Jing, Jiang	Direct iteration in nonlinear analysis of 3-dimensional concrete structures
Kamp, Cornelis L.	Aspects of moisture flow in hardened cement paste and concrete
Kollegger, Johann	Material model for cracked reinforced concrete
Lefas, Ioannis D.	Behaviour of reinforced concrete of structural walls a new interpretation
Li, Baolu	Contact density model for cracks in concrete
Mehl, M.	Redistribution of inner forces in hyperstatic reinforced concrete structures
Meyer, Christian	Analysis of underwater tunnel for internal gas explosion
Monnier, Theo	Examples of non-linear numerical analysis with DIANA
Niwa, Junichiro	Application of finite element methods to design of reinforced concrete structures
Noguchi, Hiroshi	Shear resistance mechanics of beam-column joints under reversed cyclic loading
Oh, Byung Hwan	Rate-dependent constitutive theory of concrete in tension
Okamura, Hajime	Reinforced concrete plate element subjected to cyclic loading
Phillips, D.V.	Design techniques for continuous deep beams using finite element modelling
Pruijssers, Arjan F.	Shear resistance of cracked concrete subjected to cyclic loading
Ramm, Ekkehard	Ultimate load and stability analysis of reinforced concrete shells
Rode, Ulrich	Framework model for the simulation of fracture behaviour of concrete
Roelfstra, Pieter E.	Computer codes for material science and structural engineering
Rots, Jan G.	Significance of crack models for bond-slip studies
Sakurai, Hiroshi	Simulation and evaluation of deterioration of reinforced concrete structures
Sanjayan, G.	Dynamic response of softening concrete frames
Shenglin, Di	A finite element simulation model for cracks in reinforced concrete
Shima, Hiroshi	Tension stiffness model under reversed loading including post yield range
Strøm, Ole	Nonlinear analysis of reinforced concrete roof using shell elements
Tada, Toshimasa	Bond deterioration in reinforced concrete members subjected to seismic loading
Tanabe, Tadaaki	Constitutive equations of a cracked reinforced concrete panel
Tassios, T.P.	A model for local crack behaviour
Thannon, A.Y.	Ultimate load analysis of eccentrically stiffenend shell structures
Vos, Charles J.	Ultimate load capacity of an iceberg-loaded gravity base structure
Watanabe, Yasumitsu	Unified approach in the application of the finite element method
Wittmann, Folker H.	Constitutive relations for transient conditions
Yamada, Yoshikazu	Stress-strain based inelastic earthquake response analysis of reinforced concrete frame structures
Yankelevsky, David Z.	Focal points model for uniaxial cyclic behaviour of concrete
Yoshikawa, Hiromichi	An analytical model for frictional shear slip of cracked concrete
Zeitouni, Khaldoun	Energy dissipation analysis for creep in heated concrete

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant.

Informations
sur cette fiche
Reference-ID
10543753
Publié(e) le:
13.01.2021
Modifié(e) le:
30.04.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Articles

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Articles

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.