Computational Mechanics of Concrete Structures - Advances and Applications

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Bibliografische Daten

Medium:	Tagungsband
Sprache(n):	Englisch
Verlag:	International Association for Bridge and Structural Engineering (IABSE)
Veröffentlicht in:	Zürich, Schweiz
Tagung:	IABSE Colloquium: Computational Mechanics of Concrete Structures - Advances and Applications, Delft, Netherlands, 1987
Seite(n):	617
Jahr:	1987
Reihe:	IABSE Reports (Nr. 54)
Bestellbar bei:

Artikel

Autor(en)	Titel	Seite(n)
Acker, Paul	Modelling thermal and hygrometric effects in concrete
Arnesen, A.	Large-scale analysis of gravity platforms
Balakrishnan, S.	Prediction of response of concrete beams and panels by nonlinear finite element analysis
Bazant, Zdenek P.	Nonstationary long-time processes causing loss of serviceability
Bazant, Zdenek P.	Tests of size effect in pull-out of reinforcing bars from concrete
Blaauwendraad, J.	Discrete element method and beam dynamics, an application of TILLY
Bogert, Peter A.J. Van Den	Simulation of the mechanical behaviour of young concrete
Borst, René De	Stability and uniqueness in numerical modelling of concrete structures
Calvi, Gian Michele	Numerical models for the non-linear analysis of prestressed concrete frames
Cohn, M.Z.	Constitutive laws of structural concrete for application to nonlinear analysis
Crisfield, Michael A.	Numerical comparisons involving different 'concrete-models'
Cross, Graham	Ultimate shear design from non-linear finite element analysis
Dragosavic, Mato	Modelling of bond
Eberhardsteiner, J.	Comparison of constitutive models for triaxially loaded concrete
Eibl, Josef	Numerical analysis of thick reinforced concrete slabs under impact loading
Frénay, Jerome	Time-dependent shear transfer of cracked reinforced concrete
Gambarova, Pietro G.	Modelling of interface problems in reinforced concrete
Hordijk, Dirk A.	Finite element supported fracture testing of concrete
Inoue, Norio	Analysis of reinforced concrete members subjected to cyclic loads
Isenberg, Jeremy	Analysis of reinforced concrete structures in design applications
Jian-Jing, Jiang	Direct iteration in nonlinear analysis of 3-dimensional concrete structures
Kamp, Cornelis L.	Aspects of moisture flow in hardened cement paste and concrete
Kollegger, Johann	Material model for cracked reinforced concrete
Lefas, Ioannis D.	Behaviour of reinforced concrete of structural walls a new interpretation
Li, Baolu	Contact density model for cracks in concrete
Mehl, M.	Redistribution of inner forces in hyperstatic reinforced concrete structures
Meyer, Christian	Analysis of underwater tunnel for internal gas explosion
Monnier, Theo	Examples of non-linear numerical analysis with DIANA
Niwa, Junichiro	Application of finite element methods to design of reinforced concrete structures
Noguchi, Hiroshi	Shear resistance mechanics of beam-column joints under reversed cyclic loading
Oh, Byung Hwan	Rate-dependent constitutive theory of concrete in tension
Okamura, Hajime	Reinforced concrete plate element subjected to cyclic loading
Phillips, D.V.	Design techniques for continuous deep beams using finite element modelling
Pruijssers, Arjan F.	Shear resistance of cracked concrete subjected to cyclic loading
Ramm, Ekkehard	Ultimate load and stability analysis of reinforced concrete shells
Rode, Ulrich	Framework model for the simulation of fracture behaviour of concrete
Roelfstra, Pieter E.	Computer codes for material science and structural engineering
Rots, Jan G.	Significance of crack models for bond-slip studies
Sakurai, Hiroshi	Simulation and evaluation of deterioration of reinforced concrete structures
Sanjayan, G.	Dynamic response of softening concrete frames
Shenglin, Di	A finite element simulation model for cracks in reinforced concrete
Shima, Hiroshi	Tension stiffness model under reversed loading including post yield range
Strøm, Ole	Nonlinear analysis of reinforced concrete roof using shell elements
Tada, Toshimasa	Bond deterioration in reinforced concrete members subjected to seismic loading
Tanabe, Tadaaki	Constitutive equations of a cracked reinforced concrete panel
Tassios, T.P.	A model for local crack behaviour
Thannon, A.Y.	Ultimate load analysis of eccentrically stiffenend shell structures
Vos, Charles J.	Ultimate load capacity of an iceberg-loaded gravity base structure
Watanabe, Yasumitsu	Unified approach in the application of the finite element method
Wittmann, Folker H.	Constitutive relations for transient conditions
Yamada, Yoshikazu	Stress-strain based inelastic earthquake response analysis of reinforced concrete frame structures
Yankelevsky, David Z.	Focal points model for uniaxial cyclic behaviour of concrete
Yoshikawa, Hiromichi	An analytical model for frictional shear slip of cracked concrete
Zeitouni, Khaldoun	Energy dissipation analysis for creep in heated concrete

Structurae kann Ihnen derzeit diese Veröffentlichung nicht im Volltext zur Verfügung stellen.

Über diese
Datenseite
Reference-ID
10543753
Veröffentlicht am:
13.01.2021
Geändert am:
30.04.2024

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Artikel

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Computational Mechanics of Concrete Structures - Advances and Applications

IABSE Colloquium Delft 1987

Artikel

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.