Mizi Fan 
- (2024): Near-surface mounted-FRP flexural retrofitting of concrete members using nanomaterial-modified epoxy adhesives. In: Journal of Building Engineering, v. 84 (May 2024).
- (2023): Factors influencing self-healing mechanisms of cementitious materials: A review. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Factors affecting compressive strength and expansion due to alkali-silica reaction of fly ash-based alkaline activated mortar. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Laboratory-grade vs. industrial-grade NaOH as alkaline activator: The properties of coal fly ash based-alkaline activated material for construction. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2017): Pull-out behaviour of straight and hooked-end steel fibres under elevated temperatures. In: Cement and Concrete Research, v. 95 (May 2017).
- (2022): Critical review on the thermal conductivity modelling of silica aerogel composites. In: Journal of Building Engineering, v. 57 (October 2022).
- (2022): Influence of alkalinity on self-treatment process of natural fiber and properties of its geopolymeric composites. In: Construction and Building Materials, v. 316 (January 2022).
- (2022): Advances in bonding agents for retrofitting concrete structures with fibre reinforced polymer materials: A review. In: Construction and Building Materials, v. 330 (May 2022).
- (2021): The effect of length and inclination of carbon fiber reinforced polymer laminates on shear capacity of near‐surface mounted retrofitted reinforced concrete beams. In: Structural Concrete, v. 22, n. 6 (December 2021).
- (2017): Effect of elevated temperature on pull-out behaviour of 4DH/5DH hooked end steel fibres. In: Composite Structures, v. 165 (April 2017).
- (2013): Development of Wood-Crete from Hardwood and Softwood Sawdust. In: The Open Construction and Building Technology Journal, v. 7, n. 1 (December 2013).
- (2006): Effect of Test Piece Size on Rheological Behavior of Wood Composites. In: Journal of Engineering Mechanics (ASCE), v. 132, n. 8 (August 2006).
- (2013): Analysis of end-plate connections at elevated temperatures. In: Steel and Composite Structures, v. 15, n. 1 (July 2013).
- (2014): Modelling partial end-plate connections under fire conditions. In: Journal of Constructional Steel Research, v. 99 (August 2014).
- (2014): Nature and Performance of Tropical Wood Natural Fiber Cementitious Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 7 (July 2014).
- (2016): Analysis of bond-slip between concrete and steel bar in fire. In: Computers & Structures, v. 162 (1 January 2016).
- (2012): Performance of edgewise loaded wood based panels and their I-beam components. In: Construction and Building Materials, v. 30 (May 2012).
- (2012): Cement-bonded composites made from tropical woods: Compatibility of wood and cement. In: Construction and Building Materials, v. 36 (November 2012).
- (2013): Development of Wood-Crete building materials from sawdust and waste paper. In: Construction and Building Materials, v. 40 (March 2013).
- (2014): Development of wood-crete from treated sawdust. In: Construction and Building Materials, v. 52 (February 2014).
- (2014): Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer. In: Construction and Building Materials, v. 73 (December 2014).
- (2016): Internal heat liberation and strength development of self-cured geopolymers in ambient curing conditions. In: Construction and Building Materials, v. 114 (July 2016).
- (2017): Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures. In: Construction and Building Materials, v. 140 (June 2017).
- (2017): Pull-Out Behaviour of Hooked End Steel Fibres Embedded in Ultra-high Performance Mortar with Various W/B Ratios. In: International Journal of Concrete Structures and Materials, v. 11, n. 2 (June 2017).
- (2017): Anchorage mechanisms of novel geometrical hooked-end steel fibres. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2014): Briefing: Design punching shear capacity of wood-based panels. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 167, n. 5 (October 2014).
- (2018): Additive manufacturing technology and its implementation in construction as an eco-innovative solution. In: Automation in Construction, v. 93 (September 2018).
- (2018): Predicting pull-out behaviour of 4D/5D hooked end fibres embedded in normal-high strength concrete. In: Engineering Structures, v. 172 (October 2018).
- (2016): Anchorage Effects of Various Steel Fibre Architectures for Concrete Reinforcement. In: International Journal of Concrete Structures and Materials, v. 10, n. 3 (June 2016).
- (2018): Bonding Mechanisms and Strength of Steel Fiber–Reinforced Cementitious Composites: Overview. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 3 (March 2018).
Structurae cooperates with
