Xi Chen 
- (2023): An experimental study on the influence of fly ash and crumb rubber on the mechanical property and permeability of Engineered Cementitious Composite (ECC). In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Elastoplastic Analysis of Shear Behavior of Multicell Shaped Concrete-Filled Steel Tubular Connection Based on Unified Theory. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Experimental and simulation study of rubber/cement paste interface modified by waste paint and silica in two stages. In: Construction and Building Materials, v. 382 (June 2023).
- (2023): Experimental investigation on thermal characteristics and novel thermal estimation method of BIPV façade air channel under actual operation. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Experimental and numerical study on dynamic responses of floating bridge under the shielding effect of a floating platform. In: Marine Structures, v. 89 (May 2023).
- (2023): Enhanced softening resistance and mechanical properties of Mo2C particle-reinforced Cu-matrix composites. In: Composite Structures, v. 305 (February 2023).
- (2023): Elastoplastic analysis of shear resistance of special-shaped concrete-filled steel tubular connection. In: Journal of Constructional Steel Research, v. 201 (February 2023).
- (2022): Experimental study on mechanical performance of shear connections in CLT-concrete composite floor. In: Engineering Structures, v. 269 (October 2022).
- (2022): Experimental and numerical investigation on the seismic performance of masonry walls reinforced by PC panels. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): The Feasibility of Hydroxypropyl Methylcellulose as an Admixture for Porous Vegetarian Concrete Using Coarse Recycled Aggregates. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Experimental investigation on the connection performance of defect detectable and repairable half-grouted sleeve under cyclic loads. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Evaluation of waste concrete recycled powder (WCRP) on the preparation of low-exothermic cement. In: Journal of Building Engineering, v. 53 (August 2022).
- (2022): Experimental research on seismic damage of T-shaped CFST column to steel beam joints. In: Structures, v. 38 (April 2022).
- (2022): Experimental validation on seismic performance of a monolithic precast RC shear wall structure with novel connections. In: Advances in Structural Engineering, v. 25, n. 5 (February 2022).
- (2022): Experimental research on seismic damage of cross-shaped CFST column to steel beam joints. In: Engineering Structures, v. 256 (April 2022).
- (2021): Estimation of directional wave spectra and hull structural responses based on measured hull data on 14,000 TEU large container ships. In: Marine Structures, v. 80 (November 2021).
- (2021): Experimental investigation and annual overall performance comparison of different photovoltaic vacuum glazings. In: Sustainable Cities and Society, v. 75 (December 2021).
- (2012): Effects of near-wall heat source on particle deposition. In: Building Simulation, v. 5, n. 4 (August 2012).
- (2020): Experimental and Numerical Studies on the Seismic Performance of Precast Concrete Shear Wall Structures with an Energy Dissipation Cladding Panel. In: Journal of Earthquake Engineering, v. 26, n. 6 (November 2020).
- (2020): Experimental and Numerical Investigation of Axial Tensile Strength of CHS X-Joints Reinforced with External Stiffening Rings. In: International Journal of Steel Structures, v. 20, n. 3 ( 2020).
- (2020): Experimental study on mechanical properties of laminated bamboo beam-to-column connections. In: Engineering Structures, v. 210 (May 2020).
- (2019): Experimental study on dust suppression at transhipment point based on the theory of induced airflow dust production. In: Building and Environment, v. 160 (August 2019).
- (2014): An experimental study on particle deposition above near-wall heat source. In: Building and Environment, v. 81 (November 2014).
- (2009): Experimental and numerical investigation of airflow and contaminant transport in an airliner cabin mockup. In: Building and Environment, v. 44, n. 1 (January 2009).
- (2019): Experiments and Fragility Analyses of Piping Systems Connected by Grooved Fit Joints With Large Deformability. In: Frontiers in Built Environment, v. 5 (November 2019).
- (2016): Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar. In: Construction and Building Materials, v. 121 (September 2016).
- (2018): Experimental study on flexural performance of glued-laminated-timber-bamboo beams. In: Materials and Structures, v. 51, n. 1 (February 2018).
- (2017): Experimental study and numerical simulation of long-term behavior of timber beams strengthened with near surface mounted CFRP bars. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2016): A finite element study of the effect of vertical loading on the in-plane behavior of concrete masonry infills bounded by steel frames. In: Engineering Structures, v. 117 (June 2016).
- (2017): Finite Element Study of the Effect of Interfacial Gaps on the in-Plane Behaviour of Masonry Infills Bounded by Steel Frames. In: Structures, v. 10 (May 2017).
Structurae cooperates with
