Xi Chen 
- (2025): Corrigendum to “Experimental and Numerical study on upper-room Far-UVC system under different ventilation schemes to disinfect airborne microorganisms in indoor environments” [Build. Environ. 266 (2024) 112108]. In: Building and Environment, v. 267 (Januar 2025).
- (2024): Design on thermal-mechanism coordination for binding reinforcing mesh based on shape memory polymer. In: Smart Materials and Structures, v. 33, n. 7 (7 Juni 2024).
- (2024): Analysis of Dynamic Evolution of Surrounding Rock Movement and Stress-Fracture in the Upward and Repeated Mining of Close-Distance Coal Seams. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2023): Effect of crystalline admixture and superabsorbent polymer on the self-healing and mechanical properties of basalt fibre mortars. In: Journal of Asian Architecture and Building Engineering, v. 23, n. 4 (November 2023).
- (2023): Effect of Nanographite Conductive Concrete Mixed with Magnetite Sand Excited by Different Alkali Activators and Their Combinations on the Properties of Conductive Concrete. In: Buildings, v. 13, n. 7 (28 Juni 2023).
- (2023): Assessing CO2 uptake of CO2-cured cement mortar through theoretical modeling and experimental validation. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): Airport terminal passenger forecast under the impact of COVID-19 outbreaks: A case study from China. In: Journal of Building Engineering, v. 65 (April 2023).
- (2022): Bearing Capacity of Steel Square Tubular Column I-Shaped Beam Joints Connected by New Elliptical One-Sided Bolts. In: International Journal of Steel Structures, v. 22, n. 6 (21 September 2022).
- (2022): Datasets and processing methods for boosting visual inspection of civil infrastructure: A comprehensive review and algorithm comparison for crack classification, segmentation, and detection. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Alternate Load Paths Redundancy Analysis of Steel Truss Bridges. In: Journal of Bridge Engineering (ASCE), v. 27, n. 11 (November 2022).
- (2022): Adaptive building roof combining variable transparency shape-stabilized phase change material: Application potential and adaptability in different climate zones. In: Building and Environment, v. 222 (August 2022).
- (2022): Development and validation of a defect detection and repair method for half grouted sleeve connection. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2023): A dehydration kinetic model of calcium silicate hydrates at high temperature. In: Structural Concrete, v. 24, n. 2 (April 2023).
- (2022): Carbon-Based Nanoparticle-Filled Protective Coatings for Enhanced Damage Tolerance and Corrosion Resistance of Structural Weldment. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (Januar 2022).
- (2021): Effect of displacer on performance of Stirling-type pulse tube refrigerator with work recovery. In: Science and Technology for the Built Environment, v. 27, n. 5 (April 2021).
- (2007): Cylindrical indentation induced deformation in face-centered cubic metal single crystals. In: Journal of Mechanics of Materials and Structures, v. 2, n. 3 (Mai 2007).
- (2019): A decentralized method for energy conservation of an HVAC system. In: Building Simulation, v. 13, n. 1 (Oktober 2019).
- (2018): A Cost-Benefit Analysis of Green Buildings with Respect to Construction Waste Minimization Using Big Data in Hong Kong. In: Journal of Green Building, v. 13, n. 4 (September 2018).
- (2015): Combined thermal and daylight analysis of a typical public rental housing development to fulfil green building guidance in Hong Kong. In: Energy and Buildings, v. 108 (Dezember 2015).
- (2018): Crush behaviors of polyvinyl chloride cellular structures with liquid filler. In: Composite Structures, v. 189 (April 2018).
- (2021): Chloride penetration in concrete under wave impact action. In: Magazine of Concrete Research, v. 73, n. 18 (September 2021).
- (2010): Comparison of different decontaminant delivery methods for sterilizing unoccupied commercial airliner cabins. In: Building and Environment, v. 45, n. 9 (September 2010).
- (2004): Determining ventilation strategy to defend indoor environment against contamination by integrated accessibility of contaminant source (IACS). In: Building and Environment, v. 39, n. 9 (September 2004).
- (2016): Academic origins and characteristics of the Chinese stylistic restoration. In: Frontiers of Architectural Research, v. 5, n. 3 (September 2016).
- (2016): Bio-Inspired Passive Optimized Base-Isolation System for Seismic Mitigation of Building Structures. In: Journal of Engineering Mechanics (ASCE), v. 142, n. 1 (Januar 2016).
- (2007): Axisymmetric Deformation of a Pressurized Thin Elastic Membrane with Nonuniform Thickness. In: Journal of Engineering Mechanics (ASCE), v. 133, n. 10 (Oktober 2007).
- (2012): Demand on Stiffened Steel Shear Panel Dampers in a Rigid-Framed Bridge Pier under Repeated Seismic Ground Motions. In: Advances in Structural Engineering, v. 15, n. 3 (März 2012).
- (2018): A dual-loop adaptive control for minimizing time response delay in real-time structural vibration control with magnetorheological (MR) devices. In: Smart Materials and Structures, v. 27, n. 1 (Januar 2018).
- (2017): A biologically inspired artificial muscle based on fiber-reinforced and electropneumatic dielectric elastomers. In: Smart Materials and Structures, v. 26, n. 8 (August 2017).
- (2009): The effect of a SiO2layer on the performance of a ZnO-based SAW device for high sensitivity biosensor applications. In: Smart Materials and Structures, v. 18, n. 11 (November 2009).
Structurae kooperiert mit
