Baoshan Huang 
- (2023): Laboratory investigation of gyratory-vibratory compaction method for better simulating asphalt mixture field compaction. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Maximum negative entropy deconvolution and its application to bearing condition monitoring. In: Structural Health Monitoring, v. 23, n. 3 (September 2023).
- (2005): Laboratory investigation of portland cement concrete containing recycled asphalt pavements. In: Cement and Concrete Research, v. 35, n. 10 (Oktober 2005).
- (2023): Quantification of Asphalt Mixture Interlocking Utilizing 2D and 3D Image Processing. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (Januar 2023).
- (2022): Measuring moisture damage of hot-mix asphalt (HMA) by digital imaging-assisted modified boiling test (ASTM D3625): Recent advancements and further investigation. In: Construction and Building Materials, v. 350 (Oktober 2022).
- (2022): Numerical investigation of pavement responses under TSD and FWD loading. In: Construction and Building Materials, v. 318 (Februar 2022).
- (2021): Potential Alternative to Styrene–Butadiene–Styrene for Asphalt Modification Using Recycled Rubber–Plastic Blends. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (Dezember 2021).
- (2021): Quantification of impact compaction locking point for asphalt mixture. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2020): Novel Procedure for Accurately Characterizing Nonlinear Viscoelastic and Irrecoverable Behaviors of Asphalt Binders. In: International Journal of Geomechanics, v. 20, n. 3 (März 2020).
- (2017): Pressure Distribution under Steel and Timber Crossties in Railway Tracks. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 9 (September 2017).
- (2017): Optimal Thresholds for Pavement Preventive Maintenance Treatments Using LTPP Data. In: Journal of Transportation Engineering, Part A: Systems, v. 143, n. 6 (Juni 2017).
- (2021): A phase linearisation–based modulation signal bispectrum for analysing cyclostationary bearing signals. In: Structural Health Monitoring, v. 20, n. 3 (Januar 2021).
- (2021): Laboratory Investigation of Fog-Seal Treatment on Performance of Open-Graded Friction Course Pavement. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (März 2021).
- (2020): A laboratory investigation of steel to fly ash-based geopolymer paste bonding behavior after exposure to elevated temperatures. In: Construction and Building Materials, v. 254 (September 2020).
- (2018): Laboratory investigation of particle size effects on the shear behavior of aggregate-geogrid interface. In: Construction and Building Materials, v. 158 (Januar 2018).
- (2013): Micromechanical Model for Predicting Coefficient of Thermal Expansion of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 9 (September 2013).
- (2014): Laboratory Evaluation of Utilizing Waste Heavy Clay and Foundry Sand Blends as Construction Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 9 (September 2014).
- (2013): New Method for Detecting Asphalt Contamination within Fine Aggregate Medium through Chemical Testing. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 2 (Februar 2013).
- (2014): Laboratory Evaluation on Resilient Modulus and Rate Dependencies of RAP Used as Unbound Base Material. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 2 (Februar 2014).
- (2010): Laboratory Evaluation of Moisture Susceptibility of Hot-Mix Asphalt Containing Cementitious Fillers. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 7 (Juli 2010).
- (2013): Neutron Scattering for Moisture Detection in Foamed Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 25, n. 7 (Juli 2013).
- (2011): Laboratory Investigation of Cracking Resistance of Hot-Mix Asphalt Field Mixtures Containing Screened Reclaimed Asphalt Pavement. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 11 (November 2011).
- (2010): Laboratory evaluation of permeability and strength of polymer-modified pervious concrete. In: Construction and Building Materials, v. 24, n. 5 (Mai 2010).
- (2011): Performance comparison of laboratory and field produced pervious concrete mixtures. In: Construction and Building Materials, v. 25, n. 8 (August 2011).
- (2013): Laboratory evaluation of tensile strength and energy absorbing properties of cement mortar reinforced with micro- and meso-sized carbon fibers. In: Construction and Building Materials, v. 44 (Juli 2013).
- (2014): Laboratory investigation into mechanical properties of cement emulsified asphalt mortar. In: Construction and Building Materials, v. 65 (August 2014).
- (2014): Predicting concrete coefficient of thermal expansion with an improved micromechanical model. In: Construction and Building Materials, v. 68 (Oktober 2014).
- (2015): Numerical simulation of fly ash concrete under sulfate attack. In: Construction and Building Materials, v. 84 (Juni 2015).
- (2016): Laboratory investigation of interlayer shear fatigue performance between open-graded friction course and underlying layer. In: Construction and Building Materials, v. 115 (Juli 2016).
- (2018): Mechanical property and microstructure characteristics of geopolymer stabilized aggregate base. In: Construction and Building Materials, v. 191 (Dezember 2018).
Structurae kooperiert mit
