Structures - mars 2023

Publié:	mars 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Fanaie, Nader / Shirpour, Alireza	Analytical and numerical evaluation of quarter-elliptic-braced steel moment frames (QEB-MFs)	426-442
Choi, Myeong-Ho / Lee, Chang-Hwan	Assessing the impact of eccentricity, slabs, and transverse beams on the behavior of reinforced concrete beam-column joints	212-222
Lien, Li-Chuan / Dolgorsuren, Unurjargal	BIM-based steel reinforcing bar detail construction design and picking optimization	520-536
Behforouz, Babak / Tavakoli, Davoud / Gharghani, Mehdigholi / Ashour, Ashraf	Bond strength of the interface between concrete substrate and overlay concrete containing fly ash exposed to high temperature	183-197
Reis, E. D. / de Azevedo, R. C. / Christoforo, A. L. / Poggiali, F. S. J. / Bezerra, A. C. S.	Bonding of steel bars in concrete: A systematic review of the literature	508-519
Tang, Huy / Lee, Jaehong	Chaotic enhanced teaching-based differential evolution algorithm applied to discrete truss optimization	730-747
Farajian, M. / Sharafi, P. / Eslamnia, H. / Bai, Y. / Samali, B.	Classification system for inter-modular connections in non-sway corner-supported steel modular buildings	807-825
Li, Zhong-Xian / Du, Chunyu / Liu, Dong / Liang, Xiao / Zhao, Bo	Comparative study on seismic performance of concrete-filled double skin tubular piers and hollow concrete piers: Experimental and analytical	1078-1092
Li, Si-qi	Comparison of empirical structural vulnerability rapid prediction models considering typical earthquakes	377-401
Pandouria, Anoop Kumar / Yadav, Kuldeep / Tiwari, Vikrant	Compressive and tensile behavior of AA2014-T6 under different strain rates and different temperatures	12-25
Cao, Jixing / Jiang, Zhoushi / Gao, Lei / Liu, Yingyang / Bao, Chao	Continuous crack detection using the combination of dynamic mode decomposition and connected component-based filtering method	640-654
Makoond, Nirvan / Shahnazi, Ghobad / Buitrago, Manuel / Adam, José M.	Corner-column failure scenarios in building structures: Current knowledge and future prospects	958-982
Xie, Cheng / Dou, Chao / Ru, Yi	Cyclic test and lateral resistant design of corrugated plate shear walls	748-764
Liu, Xiaojuan / Zhong, Tao / Jiang, Huanjun / Liu, Yang / Zixiong, Guo	Deformation limits of corroded reinforced concrete columns	903-917
Di, Jing / Zuo, Hongliang / Li, Yishi / Wang, Zhaowen	Design method for glulam beams strengthened with flax fiber reinforced polymer sheets	26-43
Li, Hongbo / Li, Jing / Farhangi, Visar	Determination of piers shear capacity using numerical analysis and machine learning for generalization to masonry large scale walls	443-466
Mangir, Atakan / Cosgun, Turgay / Sayin, Baris / Okumus, Vefa / Gunes, Baris	Determination of the change in the structural performance of an RC building due to a nearby deep excavation	792-806
Xin, Q. C. / Yang, L. / Huang, Y. N.	Digital design and manufacturing of spherical joint base on multi-objective topology optimization and 3D printing	479-491
Rezakhani, D. / Jafari, A. H. / Hajabassi, M.	Durability, mechanical properties and rebar corrosion of slag-based cement concrete modified with graphene oxide	678-697
Lemos, José V. / Sarhosis, Vasilis	Dynamic analysis of masonry arches using Maxwell damping	583-592
Heng, Kai / Chen, Tianli / Li, Ruiwen / Wu, Hao	Dynamic behaviors and equivalent static force of double-column pier under horizontal impact	1093-1111
Hendawitharana, Sahani / Ariyanayagam, Anthony / Mahendran, Mahen / Steau, Edward	Evaluating the bushfire resistance of a safe room using full-scale experiments	995-1015
Zhao, Ji-Zhi / Tao, Mu-Xuan / Zhuang, Liang-Dong / Yang, Ke-Yang	Experimental and analytical study on the mechanical properties of U-shaped steel-encased composite beams	593-604
Ahmed, Sayed / Mohamed, Eman Yehia / Mohamed, Heba A. / Emara, Mohamed	Experimental and numerical investigation of flexural behavior of RC beams retrofitted with reinforced UHPFRC layer in tension surface	106-123
Türer, Abdullah / Mercimek, Ömer / Anil, Özgür / Erbaş, Yaşar	Experimental and numerical investigation of punching behavior of two-way RC slab with different opening locations and sizes strengthened with CFRP strip	918-942
Liu, Ru-Rui / Ding, Ran / Zhou, Meng / Wang, Ai-Zhi / Hu, Lan-Ying / Fan, Jian-Sheng	Experimental and theoretical study on seismic behavior of slab-wall joints in a new large-span slab-shear wall structural system	1112-1129
Zhu, Jichao / Tang, Guangwu	Experimental investigation and load-deformation analysis of reinforced concrete bridge columns under various loading cycles	570-582
Liu, Kang / Chen, Wei / Ye, Jihong / Gao, Liang / Jiang, Jian	Experimental investigation of the quantified influence of gypsum plasterboard joints on the fire performance of cold-formed steel walls	312-331
Li, Jiaxu / Liu, Ming / Pei, Ziyang / Chen, Xin / Biondini, Fabio	Experimental investigation on the behavior of grouted restrained anchor connections for cluster-reinforced precast concrete columns	1168-1181
Chen, Ji-hao / Li, Xin / Zhu, Qian / Bian, Hua-wei / Dong, Xin	Experimental research on mechanical behavior and strengthening technologies of joints in hollow-core slab bridge	223-239
Ng, Adeline Ling Ying / Lau, Hieng Ho / Fang, Zhiyuan / Roy, Krishanu / Raftery, Gary M. / Lim, James B. P.	Experimental studies of timber to cold-formed steel connections with self-drilling screws	492-507
Deng, Yulin / Ge, Shuxun / Shah, Yasir Ibrahim	Experimental study and numerical simulation of precast segmental bridge column with a central RC tenon	842-854
Liu, Sai / Chen, Zheng / Wang, Xuan / Guo, Shuaicheng / Rawat, Prashant / Yao, Yiming / Bai, Xiayang / Zhu, Deju	Experimental study on flexural behavior of BTRM reinforced with hybrid combinations of short fibers and pre-stressing	1016-1027
Qin, Ying / Zhao, Ke-Xue / Shu, Gan-Ping / Ke, Lu	Experimental study on frictional behavior of different structural materials	557-569
Paul, Shinto / Shaji, Aishwarya / Menon, Devdas / Prasad, A. Meher	Experimental study on Glass Fibre Reinforced Gypsum-Reinforced concrete floor slab systems	415-425
Wang, Mingming / Xin, Zhiyong / Ou, Tong / Wang, Dayang / Zhang, Yongshan	Experimental study on temperature field and effect of standing seam stainless steel roof system with different structures forms	198-211
Abadel, Aref A. / Abbas, Husain / Alshaikh, Ibrahim M. H. / Sennah, Khaled / Tuladhar, Rabin / Altheeb, Ali / Alamri, Mohammed	Experimental study on the effects of external strengthening and elevated temperature on the shear behavior of ultra-high-performance fiber-reinforced concrete deep beams	943-957
He, Ruohuan / Zhao, Caiqi / Gang, WANG / Zhang, Zhijie / Li, Fan	FEA of in-plane compression of aluminum alloy honeycomb panels	267-280
Hasan, Mohamad A. / Sheehan, Therese / Ashour, Ashraf / Elkezza, Omar	Flexural behaviour of geopolymer concrete T-Beams reinforced with GFRP bars	345-364
Aghakouchaki Hosseini, Seyed Ehsan / Beskhyroun, Sherif	Fluid storage tanks: A review on dynamic behaviour modelling, seismic energy-dissipating devices, structural control, and structural health monitoring techniques	537-556
Aloisio, Angelo / Rosso, Marco Martino / Fragiacomo, Massimo / Alaggio, Rocco	Fragility estimate of railway bridges due to concrete fatigue	70-87
Zhang, Xue / Zhao, Yuheng / Zhao, Ailin / Li, Xinxin	Generalized cyclic bond-slip model of rebar embedded in concrete under lateral pressure: Parameter calibration and numerical implementation	402-414
Zhu, Ying-Jie / Bai, Yan / Zhao, He	Improved-GEP-based models for predicting distortion control indices of curved composite box girders	698-715
Balun, Bilal	The influence of ground motion duration on the energy based assessment of buildings with infill walls	765-778
Debnath, Pranoy / Dutta, Sekhar Chandra / Mandal, Parthasarathi	Lateral behaviour of masonry walls with different types of brick bonds, aspect ratio and strengthening measures by polypropylene bands and wire mesh	623-639
Wang, Jun / Xiang, Ze-Hui / Niu, Jian-Gang / Li, Jing-jun / Xu, Wen-Ming	Mechanical properties of short concrete columns reinforced with carbon fiber reinforced composite strips and concrete canvas under axial compression based on acoustic emission	365-376
Aslam, Mohammed / Park, Junpil / Lee, Jaesun	Microcrack inspection in a functionally graded plate structure using nonlinear guided waves	666-677
Shao, Junhu / Fan, Zihao / Huang, Yuanyuan / Zhan, Yulin / Cai, Qinhao	Multi-objective optimization of double-walled steel cofferdams based on response surface methodology and particle swarm optimization algorithm	256-266
Silva, Jordlly Reydson de Barros / Horowitz, Bernardo / Almeida Bernardo, Luís Filipe	Nonlinear analysis of planar, H-shaped and U-shaped thin reinforced concrete shear walls	295-311
Xue, Bing / Mao, Yanpian / Zhang, Chunhui / Zhang, Hailong / Qi, Zhiyong	Nonlinear fluid-induced vibro-impact analysis on the fatigue failure pattern of a large-scale trashrack with a reduced-order model	467-478
Xie, Si-Cong / Kolay, Chinmoy / Feng, De-Cheng / Ricles, James M.	Nonlinear static analysis of extreme structural behavior: Overcoming convergence issues via an unconditionally stable explicit dynamic approach	58-69
Xu, Dongdong / Wang, Yuanqing / Liu, Xiaoling / Chen, Boshan / Bu, Yidu	A novel method and modelling technique for determining the initial geometric imperfection of steel members using 3D scanning	855-874
El-Naqeeb, Mohamed H. / Abdelwahed, Basem S.	Numerical assessment of punching shear strength of eccentrically loaded footings with nonconventional shear reinforcement	716-729
Gohari, Soheil / Moslemi, Navid / Ahmed, Mizan / Mouloodi, Saeed / Rahmanpanah, Hadi / Kajtaz, Mladenko / Burvill, Colin	On 3D exact free torsional-bending vibration and buckling of biaxially loaded isotropic and anisotropic Timoshenko beams with complex cross-section	1044-1077
Yaren Aydoğdu, Afranur / Artar, Musa / Ergun, Mustafa	Optimum weight design of steel truss roof systems considering corrosion effect	88-105
Guan, Minsheng / Wang, Xin / Heng, Junlin / Sha, Meng / Du, Hongbiao	Parametric study on lateral behaviour of composite shear walls with high-strength manufactured sand concrete	332-344
Bazmara, Maziyar / Silani, Mohammad / Mianroodi, Mohammad / sheibanian, Mohsen	Physics-informed neural networks for nonlinear bending of 3D functionally graded beam	152-162
Mirzahosseini, Hamid / Mirhosseini, S. Mohammad / Zeighami, Ehsanollah	Progressive collapse assessment of reinforced concrete (RC) buildings with high-performance fiber-reinforced cementitious composites (HPFRCC)	139-151
Oval, Robin / Nuh, Mishael / Costa, Eduardo / Madyan, Omar Abo / Orr, John / Shepherd, Paul	A prototype low-carbon segmented concrete shell building floor system	124-138
Al-Rousan, Rajai Z. / Alnemrawi, Bara'a R.	Punching shear code provisions examination against the creation of an opening in existed RC flat slab of various sizes and locations	875-888
Fu, Tao / Zhu, Zhixin / Ren, Xiaoqian / Li, Yan / Sun, Yue / Meng, Lingxiao / Sun, Zhonghua	The quasi-static test of hollow prefabricated circular pier with high-strength reinforcement and calculation method for plastic hinge length	605-622
Jafarifar, Naeimeh / Bagheri Sabbagh, Alireza / Uchehara, Ikechukwu	Rubberised concrete confined with thin-walled steel profiles; a ductile composite for building structures	983-994
Li, Hongwei / Zhang, Wenyuan / Zeng, Lijing	Seismic assessment of chevron braced frames with differently designed beams	1028-1043
Guo, Dawen / Ma, Yuhong / Zhao, Guifeng / Zhang, Mengyue / Qiu, Jiepeng	Seismic behavior of steel-plate encased concrete shear wall with paralleled circular CFST columns: Laboratory test and numerical simulation	240-255
Shi, Yan / Zhang, Zhichao / Fan, Xiangxin / Han, Jianping / Qin, Hongguo / Sun, Zhiguo	Seismic design and performance analysis of bridge bents retrofitted with multistage buckling-restrained braces	779-791
Kosarzadeh, Hanieh / Poursha, Mehdi	Seismic evaluation of vertically irregular RC frames subjected to mainshock-aftershock sequences of near-fault and far-fault ground motions	1130-1156
Jangid, R. S.	Seismic performance of a clutched inerter for structures with curved surface sliders	44-57
Uzdil, Oguz / Cosgun, Turgay / Sayin, Baris / Akcay, Cemil	Seismic vulnerability assessment through global-and local-scale analyses for a historic masonry building constructed in 1896	163-182
Caterino, Nicola	A simplified analytical approach for assessing non-linear in plane seismic response of stick-built glass curtain walls	281-294
Fan, Linzi / Xu, Ruizhi / Shi, Pan / Feng, Xiaodong / Chen, Yao	Simplified form-finding for tensegrity structures through reference joints of symmetry orbits	1157-1167
Magalhães, Kaique Moreira Matos / de Macêdo Wahrhaftig, Alexandre / da Fonseca Brasil, Reyolando Manoel Lopes Rebello	Strain regime induced by axial compression in slender reinforced concrete columns using different mathematical approaches	655-665
Li, Xiaodong / Lu, Chengdong / Cui, Yifei / Zhou, Lichen	Study on the bond properties between steel bar and fiber reinforced concrete after high temperatures	889-902
Bheel, Naraindas / Ali, Montasir Osman Ahmed / Shafiq, Nasir / Almujibah, Hamad R. / Awoyera, Paul / Benjeddou, Omrane / Shittu, Ahmed / Olalusi, Oladimeji B.	Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization	826-841
Xin, Liwei / Kiani, Yaser	Vibration characteristics of arbitrary thick sandwich beam with metal foam core resting on elastic medium	1-11

Informations
sur cette fiche
IssueID
69375
Publié(e) le:
21.03.2023
Modifié(e) le:
20.06.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - mars 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - mars 2023

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.