Structures - juin 2022

Publié:	juin 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Aslay, Semi Emrah / Dede, Tayfun	3D cost optimization of 3 story RC constructional building using Jaya algorithm	803-811
Wang, Tianlong / Zhang, Xun'an / Yang, Shixuan / Wang, Xinwei	Analysis of construction parameters of outriggers in the mega column-core tube-outrigger structure based on seismic reliability	786-802
Zhang, Wen-Ming / Wang, Shi-han / Lu, Xiao-fan	An analytical algorithm for deriving the lateral bending’s natural frequencies and modal shapes of a three-tower double-cable suspension bridge	1078-1090
Kiadarbandsari, Saeed / Firoozi Nezamabadi, Maryam / Abbasi, Hassan / Yaghoobi Vayeghan, Fariborz	Analytical and experimental investigation of steel friction dampers and horizontal brake pads in chevron frames under cyclic loads	256-272
Kumar Modi, Suman / Murthy, V. M. S. R.	Assessment of blasting impacts in underwater concrete berth demolition and development of a Hybrid Controlled Blasting (HCB) technique – A case study	420-433
Monfaredi, Shakiba / Hamidi, Hamed / Khosravi, Horr	Characterization of site location versus the causative fault in seismic demands of structures	693-710
Karki, Dheeraj / Al-Hunaity, Suleiman / Far, Harry / Saleh, Ali	Composite connections between CFS beams and plywood panels for flooring systems: Testing and analysis	771-785
Saeed, Nariman / Kang, Won-Hee / Samali, Bijan	Composite overwrap repair of pipelines-reliability based design framework	448-459
Zhang, Hao-Ran / Zhao, Hui / Wang, Rui / Liang, Xiang-Xiang / Zhu, Yong	Coupling influences of elevated temperature and strain rate on the behaviour of 6061-T6 aluminium alloy used as construction material	596-606
Liu, Yongtao / Zheng, Dongjian / Cao, Enhua / Wu, Xin / Chen, Zhouyan	Cracking risk analysis of face slabs in concrete face rockfill dams during the operation period	621-632
Arafa, Ibrahim T. / Elhosseiny, Osama M. / Nawar, Mahmoud T.	Damage assessment of perforated steel beams subjected to blast loading	646-658
Wang, Mengge / Zhang, Hao / Dai, Hongzhe / Shen, Luming	A deep learning-aided seismic fragility analysis method for bridges	1056-1064
Xiao, Rucheng / Song, Chaolin / Sun, Bin / Guo, Rui / Chen, Hui	Design and experimental study of a replaceable steel-UHPC composite bridge deck	1107-1120
Tarawneh, Ahmad N. / Saleh, Eman / Dwairi, Hazim M. / Majdalaweyh, Sereen A.	Design and strength reduction factors calibration of adhesive anchors embedded in thin concrete members	213-222
Chai, Li-Juan / Guo, Li-Ping / Chen, Bo / Sun, Peng-Yu / Ding, Cong / Liu, Zhan-Chao / Wang, Liu-Ye / Wang, Yang-Kai	Design method of serviceability limit states of BFRP bar reinforced ecological high ductility concrete beam: Experimental and theoretical analysis	855-865
Bagheri Sabbagh, Alireza / Jafarifar, Naeimeh / Deniz, Derya / Torabian, Shahabeddin	Development of composite cold-formed steel-rubberised concrete semi-rigid moment-resisting connections	866-879
Twinkle, C. M. / Pitchaimani, Jeyaraj	Dynamic and buckling response modelling of functionally graded graphene oxide powder(GOP) reinforced cylindrical panels : Influence of GOP grading and non-uniformly, partially distributed edge loads.	840-854
Huang, Yiming / Wang, Piguang / Zhao, Mi / Zhang, Chao / Du, Xiuli	Dynamic response of sea-crossing bridge under combined seismic and wave-current action	317-327
Ahmed, Faris R. / Muhammad, Muhammad A. / Ibrahim, Rahel K.	Effect of alum sludge on concrete strength and two way shear capacity of flat slabs	991-1001
Liu, Yang / Chen, Zhihua / Liu, Jiadi / Zhong, Xu / Liu, Xingwang / Jiang, Jincheng	Effects of various reinforcing intra-module connection details on seismic behavior of corner-supported steel modular buildings	555-570
Zhang, Zongxing / Ye, Jihong / Huang, Zhe / Qin, Guangchong / Xu, Shanhua	Elastic buckling behavior of corroded uniformly compressed plates with three simply supported edges	946-959
Aziz, Ishfaq / Amanat, Khan Mahmud	Equivalence of plastic strength and hysteretic behavior of box and I-shaped shear links	356-369
Rizvi, Syed Muhammad Faheem / Wang, Kuihua / Jalal, Fazal E.	Evaluating the response of piles subjected to static and multiple dynamic axial loads	187-201
Miao, Zhiwei / Liu, Yifan / Geng, Xiangdong / Lu, Yong	Evaluation of seismic collapse resistance of reinforced concrete frames designed with nonlinear viscous dampers	960-976
Wang, Wei / Quan, Chaochao / Su, Sanqing / Li, Yu / Song, Honglai	Evaluation of seismic performance and effective lateral stiffness for corrugated steel-plate concrete composite structural walls repaired using bottom corner dampers	1-17
Hussein, Husam H. / Sargand, Shad M. / Zhu, Yanping / Khoury, Issam / Al Rikabi, Fouad T.	Experimental and numerical investigation on optimized ultra-high performance concrete shear key with shear reinforcement bars	403-419
Abd El-Hameed, Samya / Eladawy, Mohamed / Agamy, Mohamed H. / Haggag, Hesham	Experimental and numerical investigation on the performance of adhesive steel-dowels used in precast reinforced concrete elements	49-63
Jebasingh Daniel, J.	Experimental and numerical study on the cracking behavior and flexural strength of RC shallow beams with rectangular opening and varying length	460-468
Kwaffo, Isaac / Abdallah, Maha Hussein / Braimah, Abass	Experimental assessment of the residual capacity of axially loaded blast-damaged square RC columns	469-484
Naghipour, Morteza / Pourniazi, Nima / Hasani, Seyed Mohammad Reza	Experimental investigation of bond-slip stress of cold-formed CFSTs stub-columns in a post fire based on four cycles push out tests	977-990
Hu, Hao / Wang, Jiawei / Yan, Xingfei / Ge, Jiping / Zhang, Dachang	Experimental research and numerical analysis on mechanical behavior of lightweight-design precast bent caps with large cantilevers	536-554
Zhang, Long / Liu, Chuang / Zhou, Ting	Experimental study on mechanical properties of column foot of ancient timber structures – Take the drum-shaped plinth as an example	1002-1013
Ma, Yongchao / Qi, Ai / Yan, Guiyun / Zheng, Lianqiong / Xue, Panrong / Wang, Fei	Experimental study on seismic performance of novel fabricated T-joint with replaceable steel hinges	667-678
Upasiri, I. R. / Konthesigha, K. M. C. / Nanayakkara, SMA / Poologanathan, K. / Gatheeshgar, P. / Perera, D.	Fire performance of lightweight concrete-filled LSF wall panels	1039-1055
Lee, Chien-Liang / Wang, Yen-Po / Su, Ray Kai Leung / Chen, Yung-Tsang	Fragility analysis of floor micro vibrations induced by internal vehicles in high technology factories	679-692
Rajkumari, Sheenthoi / Thakkar, Kanan / Goyal, Harsh	Fragility analysis of structures subjected to seismic excitation: A state-of-the-art review	303-316
Sadripour, Saman / Jafari-Talookolaei, Ramazan-Ali / Malekjafarian, Abdollah	Free vibration analysis of deep doubly curved soft-core sandwich panels with different boundary conditions	880-901
Yucel, Melda / Nigdeli, Sinan Melih / Bekdaş, Gebrail	Generation of sustainable models with multi-objective optimum design of reinforced concrete (RC) structures	223-236
Ozyuksel Ciftcioglu, Aybike / Naser, M. Z.	Hiding in plain sight: What can interpretable unsupervised machine learning and clustering analysis tell us about the fire behavior of reinforced concrete columns?	920-935
Mendes, Paulo / Correia, José A. F. O. / Arrojado, João / Heo, Taemin / Fantuzzi, Nicholas / Manuel, Lance	Horizontal and vertical axis wind turbines on existing jacket platforms: Part 2 – Retrofitting activities	109-126
Farhang, Kianosh / Farahbod, Farhang / Firoozi Nezamabadi, Maryam	Hysteresis behavior of 3D RC exterior beam-column joints strengthened with CFRP sheets and spike anchors	1065-1077
Pan, Xiuzhen / Li, Hao / Chao, Huan / Li, Shen / Liang, Gang	Hysteretic behavior of a new type of outsourcing hybrid joint	88-108
Du, Hongkai / Han, Miao / Wang, Haimeng / Wang, Yuandong / Jiang, Jinwei / Yu, Jiaxin	Impact model and computational analysis of structural isolation layer deformation limitation with limiters	176-186
Cattari, Serena / Angiolilli, Michele / Alfano, Sara / Brunelli, Andrea / de Silva, Filomena	Investigating the combined role of the structural vulnerability and site effects on the seismic response of a URM school hit by the Central Italy 2016 earthquake	386-402
Wang, Mingyang / Zhang, Guangtai	Mechanical properties and seismic isolation behavior of scrap tire pads subjected to thermal-cold cycles in rural construction	607-620
Hu, Kejian / Wu, Xiaoguang	Mode shape prediction based on convolutional neural network and autoencoder	127-137
Obaidat, Yasmeen Taleb / Barham, Wasim / Obaidat, Ala' Taleb / Al-Khazaaleh, Nour Aleslam A.	Modeling of confined circular RC columns using artificial neural network and finite element method	74-87
Wang, Junfeng / Huang, Pingming / Yuan, Yangguang / Zhou, Guangli / Han, Wanshui	Multifractal analytical method and experimental study on crack evolution of dismantled RC hollow-slab beam	524-535
Khaaloo, Alireza / Omidi, Hossein	A new lateral load pattern for optimum design of concrete structures using the wave propagation theory	581-595
Moradnezhad, B. / Oghabi, M. / TahamouliRoudsari, M. / Movahednia, M.	A novel practical truss-based approach for evaluation the non-linear behavior of steel plate shear walls	370-385
Zhang, Jingcai / Ding, Yong / Guan, Xinchun	Numerical investigation on progressive collapse resistance of building isolated by friction pendulum bearings	36-48
Ghadami, A. / Pourmoosavi, Gh.	Numerical investigation on the flange contribution in the shear strength of short LYP I-shaped links without intermediate stiffeners	485-497
Fu, Li / Yin, Qiangsheng / Nakamura, Hikaru / Yamamoto, Yoshihito / Miura, Taito	A numerical study on the influence of rebar cut-off on the shear performance of RC beam by using rigid-body-spring-method	1025-1038
Wang, Dengfeng / Ren, Ruixue / Si, Jiayue / Xu, Wenling / Guo, Dapeng / Zhou, Chao	Optimization design of high-strength cold-formed steel stiffened lipped channel columns under axial compression	344-355
Sengun, Kadir / Arslan, Guray	Parameters affecting the behaviour of RC beams strengthened in shear and flexure with various FRP systems	202-212
Ahmad, Afaq / Aljuhni, Aiman / Arshid, Usman / Elchalakani, Mohamed / Abed, Farid	Prediction of columns with GFRP bars through Artificial Neural Network and ABAQUS	247-255
Xie, Gui-hua / Tao, Zi-an / Wang, C. M. / Yan, Peng / Liu, Yang	Prediction of Elastic-Softening-Debonding behavior for CFRP Tendon-Adhesively bonded anchors	659-666
Sediek, Omar A. / Wu, Tung-Yu / McCormick, Jason / El-Tawil, Sherif	Prediction of Seismic collapse behavior of deep steel columns using Machine learning	163-175
Eivani, Hamed / Tena-Colunga, Arturo / Moghadam, Abdolreza S.	Proper configuration of stiffness and strength centers in asymmetric single-story structures with semi-flexible diaphragms	149-162
Srivaro, Suthon / Lim, Hyungsuk / Li, Minghao / Pásztory, Zoltán	Properties of mixed species/density cross laminated timber made of rubberwood and coconut wood	237-246
Talebi, M. / Zeinoddini, M. / Elchalakani, M. / Asil Gharebaghi, S. / Jadidi, P.	Pseudo-random artificial corrosion morphologies for ultimate strength analysis of corroded steel tubulars	902-919
Aragão Almeida Júnior, Sálvio / Parvin, Azadeh	Reinforcement of new and existing reinforced concrete beams with fiber-reinforced polymer bars and sheets – A numerical analysis	513-523
Qureshi, Ramla / Van Coile, Ruben / Hopkin, Danny / Gernay, Thomas / Elhami Khorasani, Negar	Reliability assessment of the US prescriptive standard for steel columns under fire	711-724
Xiao, Shiying / Wang, Mengfu	Response spectrum method for building structures with general nonviscous damping models	571-580
Peng, Sheng / Xiong, Zhou / Zeng, Xiang-guo	A restoring force model for CFRP seismic-damaged RACFST columns: Theoretical, experimental, and simulation analysis	273-283
Zhao, Xiangbi / Xue, Jianyang / Zhang, Fengliang / Liu, Zuqiang / Du, Juan / Hu, Xiaofeng	Seismic assessment of loess cave of traditional earth building retrofitted with composite materials	18-35
Li, Zhiqiang / Zhai, Dongsheng / Li, Jie	Seismic behavior of the dune sand concrete beam-column joints under cyclic loading	1014-1024
Kor, Efecan / Ozcelik, Yigit	Seismic performance assessment of concentrically braced steel frames designed to the Turkish Building Earthquake Code 2018	759-770
Lu, Zhen / Li, Xiongyan / Liu, Renjie / Xue, Suduo / Zhao, Zetao / Jing, Hui / Fan, Qinxin / Liu, Tifeng / Dezhkam, Majid	Shaking table experimental and numerical investigations on dynamic characteristics of suspend-dome structure	138-148
Yang, Xing-Ju / Lin, Feng / Gu, Xiang-Lin	Simulation and analysis on improving progressive collapse resistance of RC assemblies by embedding locally debonded rebars near beam-ends	498-512
Xu, Mao / Patruno, Luca / Lo, Yuan-Lung / de Miranda, Stefano	Simulation strategies for wind shields and porous barriers for bridge deck optimization	824-839
Aydın, Zekeriya	Size, layout and tendon profile optimization of prestressed steel trusses using Jaya algorithm	284-294
Wu, Ying / Zhang, Lihua / Liu, Hongbing / Lu, Pengzhen	Stress prediction of bridges using ANSYS soft and general regression neural network	812-823
Li, Tingchun / Ran, Jinlin / Chen, Dianhao / Du, Yiteng / Zhu, Qingwen / Zhang, Hao / Li, Weiteng	Structural behaviors of steel fiber-reinforced concrete-filled geotextile tube stub columns under axial compression	434-447
Rodd, James / Castel, Arnaud	Structural considerations to minimise the risk of horizontal cracks in the wall of circular concrete tanks	1091-1106
Pronk, Arno / Mergny, Elke / Li, Qingpeng	Structural design of a lattice pykrete tower	725-747
Wang, Guotao / Hu, Bin / Cai, Jian	Study of bilinear elastic horizontal displacement spectrum models	748-758
Hua, Jianmin / Wang, Fei / Xue, Xuanyi	Study on fatigue properties of post-fire bimetallic steel bar with different cooling methods	633-645
Qiu, Dapeng / Chen, Jianyun / Cao, Xiangyu	Study on the seismic control measure of the underground large-scale frame structure	328-343
Mei, Yu-chun / Liu, Jun-feng / Li, Wei-teng / Li, Yuan-zhen / Li, Ting-chun / Wang, Gang / Sun, Bing-jun / Zhang, Shuo	Study on the supporting performance of concrete filled steel tube arches with three different cross-sections	1121-1140
Ning, Keyang / Yang, Lu / Sun, Yao / Sun, Yinan	Testing, simulation and design of hot-rolled seamless austenitic stainless steel CHS columns	295-302
Cai, Qi / Feng, Ruoqiang / Zhang, Zhijie	Topology optimization of truss structure considering nodal stability and local buckling stability	64-73
Zhang, Wei / Xue, Jianyang / Xu, Jinjun / Xi, Xingwang / Li, Baoxin / Liu, Kang	Yield-Line solutions for flexural failure of flat slabs on columns of different shapes	936-945

Informations
sur cette fiche
IssueID
61590
Publié(e) le:
09.05.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - juin 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - juin 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.