Structures - août 2020

Publié:	août 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Moreno, Diego David Pinzón / Ribeiro, Sebastião / Saron, Clodoaldo	Aggregates segregation in rubberized mortar	778-784
Oggu, Praveen / Gopikrishna, K.	Assessment of three-dimensional RC moment-resisting frames under repeated earthquakes	6-23
Banerjee, Susanta / Nayak, Sanket / Das, Sreekanta	Augmenting the seismic performance of masonry models using polypropylene band and steel wire mesh through shaking table testing	340-347
Chen, Jie / Zhang, Sumei / Wang, Yuyin / Geng, Yue	Axial compressive behavior of recycled concrete filled steel tubular stub columns with the inclusion of crushed brick	271-283
Gan, Dan / Li, Zexiang / Zhang, Tao / Zhou, Xuhong / Chung, Kwok-Fai	Axial compressive behaviour of circular concrete-filled steel tubular stub columns with an inner bamboo culm	156-168
Sohel, K. M. A. / Al-Jabri, K. / Al Abri, A. H. S.	Behavior and design of reinforced concrete building columns subjected to low-velocity car impact	601-616
Jasim, Waleed A. / Abu Tahnat, Yazan B. / Halahla, Abdulsamee M.	Behavior of reinforced concrete deep beam with web openings strengthened with (CFRP) sheet	785-800
Kim, Kun-Soo / Han, Oneil / Heo, Won-Ho / Kim, Sang-Hyo	Behavior of Y-type perfobond rib shear connection under different cyclic loading conditions	562-571
Zhao, Yuanzheng / Zhai, Ximei	Bending strength and design methods of the 6082-T6 aluminum alloy beams with circular hollow sections	870-887
Gholhaki, Majid / Pachideh, Ghasem / Javahertarash, Amirali	Capacity spectrum of SPSW using pushover and energy method without need for calculation of target point	516-523
Al-Fakih, Amin / Mohammed, Bashar S. / Wahab, M. M. A. / Liew, M. S. / Mugahed Amran, Y. H. / Alyousef, Rayed / Alabduljabbar, Hisham	Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall	169-184
Dias, A. M. A. / Dias, A. M. P. G. / Silvestre, J. D. / de Brito, J.	Comparison of the environmental and structural performance of solid and glued laminated timber products based on EPDs	128-138
Abdul-Razzaq, Khattab Saleem / Dawood, Asala Asaad	Corbel strut and tie modeling – Experimental verification	327-339
He, Zhi-Qi / Xu, Tian / Liu, Zhao	Decoupling of arch action and truss action in deep beams by strain energy	185-192
Prakash, Gyan / Singh, N. K. / Gupta, N. K.	Deformation behaviours of Al2014-T6 at different strain rates and temperatures	193-203
Nasrullah, Alvian Iqbal Hanif / Santosa, Sigit Puji / Dirgantara, Tatacipta	Design and optimization of crashworthy components based on lattice structure configuration	969-981
Xu, Zhaoyu / Tong, Genshu / Zhang, Lei	Design of vertically stiffened steel plate walls under combined uniaxial compression and shear loads	348-361
Hamzah, Mustafa Kareem / Hejazi, Farzad	The development of a multi-level unseating prevention device (MLUPD) for bridges	814-844
Xie, Ruihong / Fan, Wei / Liu, Bin / Shen, Dongjie	Dynamic behavior and vulnerability analysis of bridge columns with different cross-sectional shapes under rockfall impacts	471-486
Kumar, Ajay	Effect of approximation of curvature/inertia on the nonlinear vibrations of cantilever beam	737-744
Saghafi, Mohammad Hossein / Golafshar, Ali / Zareian, Mohammad Sajjad / Kashani, Mohammad	The effect of high-performance fiber-reinforced cementitious composites on the lateral behavior of reinforced concrete frames without seismic details	801-813
Saha, Rajib / Dutta, Sekhar Chandra / Haldar, Sumanta / Kumar, Sumit	Effect of soil-pile raft-structure interaction on elastic and inelastic seismic behaviour	378-395
Walport, F. / Gardner, L. / Nethercot, D. A.	Equivalent bow imperfections for use in design by second order inelastic analysis	670-685
Salameh, Molham / Shayanfar, Mohsenali / Barkhordari, Mohammad Ali	Estimation and development of innovative hybrid coupled shear wall system using nonlinear dynamic and fragility analysis	703-723
Bazan, Jorge L. / Fernández-Dávila, Víctor I.	Evaluation of the experimental curvature ductility of RC beams externally strengthened with CFRP bands	1010-1020
Deifalla, A. / Awad, A. / Seleem, Hosam / Abdelrahman, Amr	Experimental and numerical investigation of the behavior of LWFC L-girders under combined torsion	362-377
Chen, Jianwei / Wang, Zhanwen / Liu, Ziye / Ju, Shilong	Experimental investigation of mechanical behaviour of rebar in steel half-grouted sleeve connections with defects in water/binder ratio	487-500
Mi, Yongtao / Liu, Zhongxian / Wang, Weiqiang / Yang, Yekai / Wu, Chengqing	Experimental study on residual axial bearing capacity of UHPFRC-filled steel tubes after lateral impact loading	549-561
Su, Han / Wang, Jian / Du, Jinsheng	Fatigue behavior of corroded non-load-carrying bridge weathering steel Q345qDNH fillet welded joints	859-869
Raza, Ali / Rehman, Anees ur / Masood, Bilal / Hussain, Iqrar	Finite element modelling and theoretical predictions of FRP-reinforced concrete columns confined with various FRP-tubes	626-638
Devi, Sanasam Vipej / Singh, Konjengbam Darunkumar	Finite element study of the stiffening effects on torsional capacity of perforated stainless steel slender semi-elliptical hollow section members	66-78
Paik, Jeom Kee / Lee, Dong Hun / Noh, Sung Hwan / Park, Dae Kyeom / Ringsberg, Jonas W.	Full-scale collapse testing of a steel stiffened plate structure under cyclic axial-compressive loading	996-1009
Yang, D. S. / Wang, C. M. / Pan, W. H.	Further insights into moving load problem on inclined beam based on semi-analytical solution	247-256
Pham, Hoang-Anh / Truong, Viet-Hung / Tran, Minh-Tu	Fuzzy static finite element analysis for functionally graded structures with semi-rigid connections	639-650
Wang, P. / Turvey, G. J.	The gravity load simulator – Re-visited	204-213
Wang, Zhen / Pan, Wei / Zhang, Zhiqian	High-rise modular buildings with innovative precast concrete shear walls as a lateral force resisting system	39-53
Hashim, Raad / Ji, Tianjian / Mandal, Parthasarathi / Zhang, Qingwen / Zhou, Ding	Human-structure interaction experiments to determine the dynamic properties of the standing human body in vertical vibration	934-946
Demir, Ugur / Goksu, Caglar / Binbir, Ergün / Ilki, Alper	Impact of time after fire on post-fire seismic behavior of RC columns	537-548
Zhang, Pu / Hu, Yi / Pang, Yuyang / Feng, Hu / Gao, Danying / Zhao, Jun / Sheikh, Shamim Ahmed	Influence factors analysis of the interfacial bond behavior between GFRP plates, concrete	79-91
Raeesi, Farzad / Farahmand Azar, Bahman / Veladi, Hedayat / Talatahari, Siamak	An inverse TSK model of MR damper for vibration control of nonlinear structures using an improved grasshopper optimization algorithm	406-416
Demertzi, M. / Silvestre, J. / Garrido, M. / Correia, J. R. / Durão, V. / Proença, M.	Life cycle assessment of alternative building floor rehabilitation systems	237-246
Lagomarsino, Sergio / Marino, Salvatore / Cattari, Serena	Linear static procedures for the seismic assessment of masonry buildings: Open issues in the new generation of European codes	427-440
Marchi, Luca / Trutalli, Davide / Scotta, Roberto / Pozza, Luca	Macro-element modelling of a dissipative connection for CLT structures	582-600
Yu, Feng / Cao, Yue / Fang, Yuan / Zhang, Yang / Niu, Kang	Mechanical behavior of self-stressing Steel Slag Aggregate Concrete Filled Steel Tubular short columns with different loading modes	947-957
Fang, Yuan / Yu, Feng / Guan, Yucong / Wang, Zhongwen / Feng, Chaochao / Li, Dongang	A model for predicting the stress–strain relation of PVC-CFRP confined concrete stub columns under axial compression	259-270
Yavuz, Şahin / İlman, Mehmet Mert / Binici, Batuhan	Modeling approach and analysis time comparison of single-link flexible steel- and epoxy-glass/carbon-fiber composite manipulators	396-405
Nguyen, Dong Van / Kim, Dookie / Duy Nguyen, Duan	Nonlinear seismic soil-structure interaction analysis of nuclear reactor building considering the effect of earthquake frequency content	901-914
Manohar, Titus / Suribabu, C. R. / Murali, G. / Salaimanimagudam, M. P.	A novel steel-PAFRC composite fender for bridge pier protection under low velocity vessel impacts	765-777
Wang, Guodong / Ma, Yafei / Wang, Lei / Su, Xiaochao / Zhang, Jianren	Numerical investigation of stress concentration factor induced by multiple scenarios of adjacent corrosion pits	572-581
Khaloo, Alireza / Maghsoudi-Barmi, Ali / Ehteshami Moeini, Milad	Numerical parametric investigation of hysteretic behavior of steel-reinforced elastomeric bearings under large shear deformation	456-470
Arezoomand Langarudi, P. / Ebrahimnejad, M.	Numerical study of the behavior of bolted shear connectors in composite slabs with steel deck	501-515
Zhan, Wanghu / He, Xianghua / Yang, Jiamou / Lai, Junhao / Zhu, Dachang	Optimal design method for 3-DOF planar compliant mechanisms based on mapping matrix constraints	1-5
Ali, Saima / Thambiratnam, David / Liu, Xuemei / Fawzia, Sabrina	Performance evaluation of innovative composite pedestrian bridge	845-858
Yao, Yue / Ji, Bohai / Ye, Zhi / Fu, Zhongqiu / Zhu, Qi	Prediction for key damaged parts in steel bridge decks based on the stress influence area	745-754
Marzok, A. / Lavan, O. / Dancygier, A. N.	Predictions of moment and deflection capacities of RC shear walls by different analytical models	105-127
Huang, Zhen / Zhao, Yingkai / Zhang, Jiwen / Wu, Yue	Punching shear behaviour of concrete slabs reinforced with CFRP grids	617-625
Amiri, Somayeh / Talaeitaba, Sayed Behzad	Punching shear strengthening of flat slabs with EBROG and EBRIG – FRP strips	139-155
Rossi, Alexandre / Martins, Carlos Humberto / Nicoletti, Renato Silva / de Souza, Alex Sander Clemente	Reassesment of lateral torsional buckling in hot-holled I-beams	524-536
Bernardo, L. F. A. / Teixeira, M. M.	Refined softened-truss model with efficient solution procedure for reinforced concrete members under torsion combined with bending	651-669
Feng, Yu / Qi, Jianan / Wang, Jingquan / Zhang, Wenxue / Zhang, Qifeng	Rotation construction of heavy swivel arch bridge for high-speed railway	755-764
Mohsenian, Vahid / Filizadeh, Reza / Özdemir, Zuhal / Hajirasouliha, Iman	Seismic performance evaluation of deficient steel moment-resisting frames retrofitted by vertical link elements	724-736
Yousef-beik, Seyed Mohamad Mahdi / Bagheri, Hamed / Veismoradi, Sajad / Zarnani, Pouyan / Hashemi, Ashkan / Quenneville, Pierre	Seismic performance improvement of conventional timber brace using re-centring friction connection	958-968
Abraik, Emad	Seismic performance of shape memory alloy reinforced concrete moment frames under sequential seismic hazard	311-326
Dutta, Subhrajit	A sequential metamodel-based method for structural optimization under uncertainty	54-65
Lin, Kun / Zhou, Annan / Liu, Hongjun / Liu, Yi / Huang, Chenchao	Shear thickening fluid damper and its application to vibration mitigation of stay cable	214-223
Rahnavard, Rohola / Craveiro, Hélder D. / Napolitano, Rebecca	Static and dynamic stability analysis of a steel-rubber isolator with rubber cores	441-455
Cao, Liang / Chen, Y. Frank / Liu, Jiepeng	Steady-state response of rectangular plate with four free edges supported at internal points	417-426
Elkholy, Said / El-Ariss, Bilal / Galal, Sameh	Structural performance of jointed reinforced concrete pavement slab with subbase erosion	982-995
Kumar, Amit / Singha, M. K. / Tiwari, Vikrant	Structural response of metal sheets under combined shear and tension	915-933
Bagherkhani, Ali / Baghlani, Abdolhossein	Structure-MR damper reliability analysis using weighted uniform simulation method	284-297
Li, Yang / Chen, Jinjie / Wang, Jianxi / Shi, Xianfeng / Chen, Long	Study on the interface damage of CRTS Ⅱ slab track under temperature load	224-236
Hosseinzadeh, Shadman / Galal, Khaled	System-level seismic resilience assessment of reinforced masonry shear wall buildings with masonry boundary elements	686-702
Bhasker, Rohan / Menon, Arun	Torsional irregularity indices for the seismic demand assessment of RC moment resisting frame buildings	888-900
Mena, Quisco	Towards a structural efficiency classification system	298-310
Sun, Wuyi / Zhang, Qinghua	Universal equivalent static wind loads of fluctuating wind loads on large-span roofs based on compensation of structural frequencies and modes	92-104
Sahu, Nishant Kumar / Biswal, Deepak Kumar / Joseph, Shince V. / Mohanty, Sukesh Chandra	Vibration and damping analysis of doubly curved viscoelastic-FGM sandwich shell structures using FOSDT	24-38

Informations
sur cette fiche
IssueID
36722
Publié(e) le:
30.04.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - août 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - août 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.