Structures - avril 2020

Publié:	avril 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Bocciarelli, Massimiliano / Pisani, Marco Andrea	Algebrized approach for the finite element analysis of heterogeneous viscoelastic structures	783-790
Mijušković, Olga / šćepanović, Biljana / Žugić, Ljiljana / Ćorić, Branislav	Analytical approach to elastic stability problems of plates with different boundary conditions subjected to combined bending, shear and patch loading	335-350
Bashir, Khalid / Ahad, Arif / Sachithanantham, P. / Haque Chaudhuri, Chaidul	Assessment of axial load carrying capacity of GFRP funicular shells with steel mesh	974-983
Wang, Wanqian / Wang, Jingfeng / Guo, Lei / Guo, Xiang / Liu, Xiaoxian	Behavior and analytical investigation of assembled connection between steel beam and concrete encased CFST column	562-579
Cong, Xinyu / Zhou, Wei / Elchalakani, Mohamed	Bond performance of reinforced alkali-activated composites using water-quenched slag as alternative fine aggregates	137-150
White, R. E. / Alexander, N. A. / Macdonald, J. H. G. / Bocian, M.	Characterisation of crowd lateral dynamic forcing from full-scale measurements on the Clifton Suspension Bridge	415-425
Zhao, Jingang / Jia, Hongyu / Zhan, Yulin / Xiang, Zhenyu / Zheng, Shixiong / Bi, Kaiming	Combination of LS-SVM algorithm and JC method for fragility analysis of deep-water high piers subjected to near-field ground motions	282-295
Aoude, Hassan / Hosinieh, Milad Mohammadi / Cook, William D. / Mitchell, Denis	Core confinement and cover spalling in square and rectangular SCC and SFRC columns	804-822
Davarpanah, Mohammad / Ronagh, Hamid / Memarzadeh, Parham / Behnamfar, Farhad	Cyclic behaviour of elliptical-shaped reduced web section connection	955-973
Yazdanian, Mohsen / Ingham, Jason M. / Lomax, Will / Wood, Regan / Dizhur, Dmytro	Damage observations and remedial options for approximately 1500 legged and flat-based liquid storage tanks following the 2016 Kaikōura earthquake	357-376
Correia Lopes, Gonçalo / Vicente, Romeu / Ferreira, Tiago Miguel / Azenha, Miguel / Estêvão, João	Displacement-based seismic performance evaluation and vulnerability assessment of buildings: The N2 method revisited	41-49
Celik, Ilyas Devran / Ciftci, Merve / Ozturk, Yusuf	Effects of the external tendons on the system capacity and stud behavior in composite beams	851-863
Lee, C. K. / Khan, M. K. I. / Zhang, Y. X. / Rana, Mohammad M.	Engineered cementitious composites (ECC) encased concrete-steel composite stub columns under concentric compression	386-399
Vella, Nathan / Gardner, Leroy / Buhagiar, Spiridione	Experimental analysis of cold-formed steel-to-timber connections with inclined screws	890-904
Jiang, Qing / Wang, Hanqin / Feng, Yulong / Chong, Xun / Wang, Xiaowei / Zhu, Yi	Experimental and numerical studies of a controlled rocking steel frame with buckling-restrained columns	690-704
Hemzah, Sadjad A. / Alyhya, Wajde S. / Hassan, Saif A.	Experimental investigation for structural behaviour of self-compacting reinforced concrete hollow beams with in-place circular openings strengthened with CFRP laminates	99-106
Ye, Jia-Bin / Cai, Jian / Chen, Qing-Jun / Liu, Xinpei / Tang, Xu-Lin / Zuo, Zhi-Liang	Experimental investigation of slender RC columns under horizontal static and impact loads	499-513
Azzawi, Raad / Abolmaail, Ali	Experimental investigation of steel fiber RC hollow columns under eccentric loading	456-463
Dirikgil, Tamer	Experimental investigation of the contributions of CFRP and externally collar strengthening to the seismic performance of RC columns with different cross-sections	266-281
Kheyroddin, Ali / Mohammadkhah, Amirhossein / Dabiri, Hamed / Kaviani, Ahmad	Experimental investigation of using mechanical splices on the cyclic performance of RC columns	717-727
Dogar, Attiq Ur Rahman / Ubaid Ur Rehman, Hafiz Muhammad / Tafsirojjaman, T. / Iqbal, Naveed	Experimental investigations on inelastic behaviour and modified Gerber joint for double-span steel trapezoidal sheeting	514-525
Qiao, Qiyun / Yang, Zhaoyuan / Mou, Ben	Experimental study on axial compressive behavior of CFRP confined square timber filled steel tube stub columns	823-834
Bahadir, Fatih	Experimental study on three-dimensional reinforced concrete frames subjected to dynamic loading	835-850
Su, Han / Wang, Jian / Du, Jinsheng	Fatigue behavior of uncorroded butt welded joints made of bridge weathering steel	377-385
Qi, Jianan / Cheng, Zhao / Wang, Jingquan / Tang, Yiqun	Flexural behavior of steel-UHPFRC composite beams under negative moment	640-649
Junaid, M. Talha / Elbana, Abdalla / Altoubat, Salah	Flexural response of geopolymer and fiber reinforced geopolymer concrete beams reinforced with GFRP bars and strengthened using CFRP sheets	666-677
Javadi, Pasha / Tizchang, Ali / GhafourianHesami, AmirHosein / Askari, MohammadJavad	A friction-based connection for retrofitting RC frames by steel braced frames	627-639
Alam, M. S. / Hussein, A.	Idealized tension stiffening model for finite element analysis of glass fibre reinforced polymer (GFRP) reinforced concrete members	351-356
Guo, Xiang / He, Zheng / Xu, Jingjing	Identification of incremental seismic damage development in RC structures excited with sequence-type ground motions	464-476
Afefy, Hamdy M. / Abdel-Aziz, Mahmoud A. / Kassem, Nesreen M. / Mahmoud, Mohamed H.	Improving flexural performance of post-tensioned pre-cast pre-stressed RC segmental T-beams	304-316
Ghabussi, Aria / Asgari Marnani, Jafar / Rohanimanesh, Mohammad Sadegh	Improving seismic performance of portal frame structures with steel curved dampers	27-40
Bengar, Habib Akbarzadeh / Hosseinpour, Mehdi / Celikag, Murude	Influence of CFRP confinement on bond behavior of steel deformed bar embedded in concrete exposed to high temperature	240-252
Helal, James / Stephan, André / Crawford, Robert H.	The influence of structural design methods on the embodied greenhouse gas emissions of structural systems for tall buildings	650-665
Bai, Rui / Gao, Wen-Long / Liu, Si-Wei / Chan, Siu-Lai	Innovative high-order beam-column element for geometrically nonlinear analysis with one-element-per-member modelling method	542-552
Toorani, Alireza / Gholhaki, Majid / Vahdani, Reza	The investigation into the effect of consecutive earthquakes on the strongback bracing system	477-488
Zhou, Junyong / Chen, Zhixing / Yi, Jiang / Ma, Haiying	Investigation of multi-lane factor models for bridge traffic load effects using multiple lane traffic data	444-455
Molari, Luisa / Mentrasti, Lando / Fabiani, Marco	Mechanical characterization of five species of Italian bamboo	59-72
Kisku, Nishikant / Rajhans, Puja / Panda, S. K. / Pandey, Vikrama / Nayak, Sanket	Microstructural investigation of recycled aggregate concrete produced by adopting equal mortar volume method along with two stage mixing approach	742-753
Veljkovic, Ana / Carvelli, Valter / Rezazadeh, Mohammadali	Modelling the bond in GFRP bar reinforced concrete thin structural members	13-26
Sangiorgio, Valentino / Uva, Giuseppina / Aiello, Maria Antonietta	A multi-criteria-based procedure for the robust definition of algorithms aimed at fast seismic risk assessment of existing RC buildings	766-782
Bakhshinezhad, Sina / Mohebbi, Mohtasham	Multi-objective optimal design of semi-active fluid viscous dampers for nonlinear structures using NSGA-II	678-689
Sheikhi, Javad / Fathi, Mojtaba / Rahnavard, Rohola	Natural rubber bearing incorporated with high toughness steel ring dampers	107-123
Yossef, N. M.	A new approach to estimate the shear strength of curved corrugated steel webs	400-414
Noorifard, Azadeh / Tabeshpour, Mohammad Reza / Mehdizadeh Saradj, Fatemeh	New approximate method to identify soft story caused by infill walls	922-939
Lima, Mehdi / Doh, Jeung-Hwan / Fragomeni, Sam	New design chart for CFRP strengthened RC walls with opening in one-way action	253-265
Obeydi, Marzieh / Zeynalian, Mehran / Daei, Maryam	New initial stiffness equation for the bearing component of bolted thin-walled steel plates	791-803
Dao, Nhan D. / Nguyen-Van, Hieu / Nguyen, Tuan H. A. / Chung, Ai B.	A new statistical equation for predicting nonlinear time history displacement of seismic isolation systems	177-190
Li, Haiyan / Yu, Zhiwu / Mao, Jianfeng / Jiang, Lizhong	Nonlinear random seismic analysis of 3D high-speed railway track-bridge system based on OpenSEES	87-98
Patel, Vipulkumar Ishvarbhai / Liang, Qing Quan / Hadi, Muhammad N. S.	Numerical analysis of circular double-skin concrete-filled stainless steel tubular short columns under axial loading	754-765
Gao, Shan / Zeng, Cong / Zhou, Linqiang / Liu, Xiaohua / Gao, Bingyin	Numerical analysis of the dynamic effects of wine-cup shape power transmission tower-line system under ice-shedding	1-12
Tafsirojjaman, T. / Fawzia, Sabrina / Thambiratnam, David / Zhao, Xiao-Ling	Numerical investigation of CFRP strengthened RHS members under cyclic loading	610-626
Nijgh, Martin Paul / Veljković, Milan	An optimisation strategy for the (in- and out-of-plane) resistance of steel beams in demountable composite floor systems	880-889
Bui, Thi-Loan / Bui, Tan-Trung / Bui, Quoc-Bao / Nguyen, Xuan-Huy / Limam, Ali	Out-of-plane behavior of rammed earth walls under seismic loading: Finite element simulation	191-208
Zamanifar, Hossein / Sarrami-Foroushani, Saeid / Azhari, Mojtaba	A parametric study on the mechanical and thermal stability of corrugated-core sandwich plates	209-226
Bahrebar, Milad / Lim, James B. P. / Clifton, George Charles / Zirakian, Tadeh / Shahmohammadi, Amir / Hajsadeghi, Mohammad	Perforated steel plate shear walls with curved corrugated webs under cyclic loading	600-609
Song, Tian-Yi / Xiang, Kai	Performance of axially-loaded concrete-filled steel tubular circular columns using ultra-high strength concrete	163-176
Amiri, Mahsa / Yakhchalian, Masood	Performance of intensity measures for seismic collapse assessment of structures with vertical mass irregularity	728-741
Sahoo, Saumyaranjan / Singh, Bhupinder	Recycled aggregate concrete slab punching shear capacity	426-443
Ashteyat, Ahmed M. / Haddad, Rami / Obaidat, Yasmeen T.	Repair of heat-damaged SCC cantilever beams using SNSM CFRP strips	151-162
Nijgh, M. P. (Martin) / Veljković, M. (Milan)	Requirements for oversized holes for reusable steel-concrete composite floor systems	489-498
Olalusi, Oladimeji Benedict	Safety level assessment of the fib model code 2010 shear design provisions for beams with stirrups using a mechanics-based probabilistic model	553-561
Rezazadeh, F. / Talatahari, S.	Seismic energy-based design of BRB frames using multi-objective vibrating particles system optimization	227-239
Bianchini, Nicoletta / Mendes, Nuno / Lourenço, Paulo	Seismic evaluation of Bagan heritage site (Myanmar): The Loka-Hteik-Pan temple	905-921
Nader, K. A. Attari / Zargaran, M. / Khalili Jahromi, K. / Bayat, M. R. / Jahanmohammadi, A.	Seismic evaluation of cladded exterior walls considering the effects of façade installation details and out-of-plane behavior of walls	317-334
Li, Jie / Chen, Zhongfan / Chen, Wenwen / Xu, Zhifeng	Seismic performance of pre-cast self-insulation shear walls made by a new type of foam concrete with high strength and low thermal conductivity	124-136
Senthilkumar, R. / Satish Kumar, S. R.	Seismic performance of semi-rigid steel-concrete composite frames	526-541
Elhegazy, Hosam / Ebid, Ahmed M. / Mahdi, Ibrahim M. / Aboul Haggag, S. Y. / Rashid, Ibrahim Abdel	Selecting optimum structural system for R.C. multi-story buildings considering direct cost	296-303
Yang, Yuanzhang / Orr, John / Ibell, Tim	Shear behaviour of fabric formed T beams reinforced using W-FRP	869-879
Abu Tahnat, Yazan B. / Samaaneh, Mohammad A. / Dwaikat, Mahmud M. S. / Halahla, Abdulsamee M.	Simple equations for predicting the rotational ductility of fiber-reinforced-polymer strengthened reinforced concrete joints	73-86
Haddouch, Manal / Hajjout, Imane / Boudi, El Mostapha	Sizing optimization of exposed steel penstocks supported by ring girders using the combined ANN-GA technique	705-716
Sakai, Yasunori / Tanaka, Tomohisa	Structural damper for auto-damping mechanical components	864-868
Özsoy Özbay, Ayşe Elif / Sanrı Karapınar, Işıl / Unen, Huseyin Can	Visualization of seismic vulnerability of buildings with the use of a mobile data transmission and an automated GIS-based tool	50-58
Abeling, Shannon / Ingham, Jason M.	Volume loss fatality model for as-built and retrofitted clay brick unreinforced masonry buildings damaged in the 2010/11 Canterbury earthquakes	940-954
Russell, Matthew J. / Lim, James B. P. / Roy, Krishanu / Clifton, G. Charles / Ingham, Jason M.	Welded steel beam with novel cross-section and web openings subject to concentrated flange loading	580-599

Informations
sur cette fiche
IssueID
35910
Publié(e) le:
10.01.2020
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structures - avril 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structures - avril 2020

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.