Structural Concrete - v. 24, n. 6 (novembre 2023)

Publié:	novembre 2023

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Asensio, Javier / Josa, Irene / Monserrat, Andrea / de la Fuente, Albert	3D‐printed concrete footbridges: An approach to assess the sustainability performance	7705-7725
Camps, Benjamin / Schmidt, Maximilian / Hegger, Josef	Anchorages and laps according to the next‐generation Eurocode 2—Overview and comparison to current provisions	7043-7061
Rauch, Fabian / Fischer, Oliver	Application of a structural monitoring on segmental tunnel linings	7779-7793
Bokor, Boglárka / Sharma, Akanshu / Pregartner, Thilo	An assessment method to ensure applicability of concrete capacity method for design of anchorages: Linear force distribution approach	7249-7271
Lu, Linhan / Liang, Tao / Zhang, Tianhe / Ren, Qingxin / Wang, Qinghe / Wang, Sheng	Axial compressive behaviors of circular steel slag concrete‐filled steel tube slender columns	6953-6972
Kılıç, Mahmut / Alcan, Haluk Görkem / Çelebi, Oğuzhan / Bayrak, Barış / Öz, Ali / Kaplan, Gökhan / Aydın, Abdulkadir Cüneyt	The behavior of cold‐formed steel geopolimeric composites	7355-7377
Corres, Enrique / Muttoni, Aurelio	Bond of steel reinforcement based on detailed measurements: Results and interpretations	7173-7204
Liu, Jialiang / Liu, Renjie / Ling, Jun / Cai, Yuting / Long, Wanpeng / Zhang, Xuguang	Breaking mechanism and damage evolution rule of abrasive water jet impacting reinforced concrete	7576-7590
Koppitz, Robert / Schindler, Johannes / Patt, Bruno	Chipperfield extension of the Kunsthaus Zurich	6847-6850
Gupta, P. K. / Singh, Chandrabhan	Comparison of 2D and 3D meso‐model of concrete under high strain loading rate	7378-7399
Prado, Fabio Selleio / Meneghetti, Leila Cristina / Rebouças Stucchi, Fernando	Confinement effect of two‐way beam‐and‐slab system on the effective compressive strength of interior concrete columns	6872-6896
Al‐Naimi, Hasanain K. / Abbas, Ali A.	Constitutive model for plain and fiber‐reinforced lightweight concrete under compression	7625-7647
Ahmed, Tauqir / Ali, Muhammad / Akmal, Usman / Aslam, Fahid / Abbass, Wasim / Aziz, Mubashir / Hamza, Muhammad / Shah, Ihsanullah / Shah, Hammad Ahmed	Coupled effect of waste glass powder and glass fibers on mechanical properties of concrete: A step towards the elimination of non‐biodegradable waste	7603-7624
Tran, Van Quan	Data‐driven approach for investigating and predicting of compressive strength of fly ash–slag geopolymer concrete	7419-7444
Debernardi, Pier Giorgio / Taliano, Maurizio	Deduction of the bond low from test on short RC tie in service conditions	7009-7020
Hang, Le / Karunkritkul, Kritcha / Prayoonwet, Wanakorn / Jirawattanasomkul, Tidarut / Likitlersuang, Suched / Stitmannaithum, Boonchai / Thammarak, Punchet	Dynamic characteristic measurement of precast and cast in‐situ walls in abandoned high‐rise building using ambient and forced vibration methods	6897-6922
Wang, Zhihang / Bai, Erlei / Liu, Chaojia / Qin, Lijun / Lv, Yan	Early age dynamic mechanical properties of basalt fiber reinforced early strength concrete	7648-7659
Zych, Mariusz	The effect of the degree of cracking on the state of stress and cracks width in elements with restrained boundary conditions	7091-7102
Marchão, Carla / Marreiros, Rui / Ribeiro, Filipe	Effect of the type of posttensioning anchorage on the behavior of anchorage zones	6973-6987
Keser, Hasan Erinc / Ramyar, Kambiz / Gültekin, Adil	Effect of water‐reducing admixtures water content on rheology, workability, and mechanical properties of fly ash‐based geopolymer and slag‐based alkali‐activated mixtures	7561-7575
Zhu, Lihua / Wang, Yixuan / Li, Tong / Wang, Haonan / Zhang, Fengjian	Experimental investigation on the seismic behavior of TRAC frame column with RCA treated by the silica fume cement paste	7205-7221
Zhu, Zhangfeng / Wang, Jun	Experimental research on interfacial bonding performance of high‐strength steel pipe and surrounding concrete/grout for assembled composite columns	7103-7115
Ma, Xinxin / Sun, Jianheng / Zhang, Ruolan / Yang, Mingjing / Meng, Zhiliang / Yuan, Jing / Zhang, Fengshuang	Experimental studies on flexural behavior of full iron tailings concrete beams	7222-7236
Kytölä, Ulla / Tulonen, Joonas / Asp, Olli / Nakari, Tarja / Laaksonen, Anssi	Experimental study of moment redistribution before yielding in precast prestressed concrete beams made continuous	6933-6952
Feng, Qingxing / Ye, Nihong / Qu, Chen / Gong, Shunfeng / Lin, Huangcheng	Experimental study on flexural behavior of T‐shaped reinforced concrete laminated beams with defects	7135-7147
Mellios, Nikolaos / Spyridis, Panagiotis / Bergmeister, Konrad	Extended concrete capacity design method for anchors close to non‐rectangular edges	7148-7172
Fathalla, Eissa / Mihaylov, Boyan	Fatigue behavior of deep concrete beams with critical shear cracks	7314-7333
di Summa, Davide / Parpanesi, Matteo / Ferrara, Liberato / De Belie, Nele	A holistic life cycle design approach to enhance the sustainability of concrete structures	7684-7704
Singh, Harpreet / Tiwary, Aditya Kumar	Influence of anchored orbicular rings on the performance of sandwich concrete‐filled double‐skin steel tube columns	7062-7090
Maurya, Sameer Kumar / Kothiyal, N. C.	Influence of physico‐mechanical and electrical resistivity performance of high volume fly‐ash cementitious mortar with low carbon	7506-7523
Umer, Muhammad / Ahmad, Junaid / Abdullah, Muhammad Saleem / Khan, Hamas Ahmad / Ali, Shehroze / Younas, Muhammad Umair	Mechanical properties and life cycle assessment of sugarcane bagasse and corn cob ashes‐based geopolymer concrete to promote circular economy	7482-7505
Galano, Simone / Losanno, Daniele / Miluccio, Giacomo / Parisi, Fulvio	Multidimensional nonlinear numerical simulation of post‐tensioned concrete girders with different prestressing levels	7021-7042
Ulucan, Muhammed / Yildirim, Gungor / Alatas, Bilal / Alyamaç, Kürşat Esat	A new intelligent sunflower optimization based explainable artificial intelligence approach for early‐age concrete compressive strength classification and mixture design of RAC	7400-7418
Vieira, Pedro H. S. M. / Díaz, Rafael S. / Marques, Marília G. / Liberati, Elyson A. P. / Trautwein, Leandro M.	Nonlinear analysis of the impact of openings on punching shear strength	7334-7354
Wang, Wenbo / Cui, Jie / Shan, Yi / Li, Yadong / Hou, Zhenkun	Numerical analysis of slurry flow in pile‐end grouting of the drilling with prestressed concrete pipes	7237-7248
Nguyen‐Sy, Tuan / Thai, Minh‐Quan / Vu, Minh‐Ngoc	Optimized machine‐learning methods for predicting the long‐term viscoelastic behavior of heterogeneous concrete mixtures	7466-7481
Nemati Chari, Mehdi / Naseroleslami, Ramin / Ahmadi, Babak	Properties of cement‐based materials containing calcium stearate and supplementary cementitious materials	7445-7465
Wang, Jiangjiang / Yang, Yusen / Chu, Jiayin / Mo, Kim Hung / Yap, Pow‐Seng	Recent developments in utilization of nano silica in self‐compacting concrete: A review	7524-7548
Hoffmann, Lars / Käseberg, Stefan / Holschemacher, Klaus	Reinforcement detail: Stress trajectory‐oriented corbel reinforcement	6923-6932
Nagaraju, A. S. V. / Kumar, Ratnesh	Reliability based service life prediction of bridges in Indian coastal region	7759-7778
Way, Andrew C. / Viljoen, Celeste	Reliability performance in tension governed reinforced concrete reservoirs as a function of target crack width	7726-7741
Amani, Saeed / Yousefpour, Hossein	Residual behavior of reinforced concrete corbels after exposure to elevated temperatures	6851-6871
Kanavaris, Fragkoulis / Coelho, Mário / Ferreira, Nuno / Azenha, Miguel / Andrade, Carmen	A review on the effects of cracking and crack width on corrosion of reinforcement in concrete	7272-7294
Wang, Qiang / Qin, Wei‐yang / Gong, Kai‐yuan / Lu, Chun‐Ling / Zhu, Wan‐Xu	Seismic behavior of RC columns under high active confinement force	6988-7008
Abdo, Ayman / Sharaky, Ibrahim A. / Ahmed, Sayed	Shear performance of reinforced concrete beams strengthened in shear using NSM bars and reinforced HSC layers	7295-7313
Matres, Victoria / Fernández, Juan José / Lopez, Maria / Peiró, Luis / Madrid, Antonio José / Rebolledo, Nuria / Torres, Julio / Sánchez, Javier	Stainless steel reinforcement: New material in the latest draft of second‐generation Eurocode 2	7549-7560
Ghosn, Samer / Hamad, Bilal / Awwad, Elie	Structural and life cycle assessments of recycled aggregate concrete beams incorporating industrial hemp fibers	7742-7758
Sun, Bin / Luo, Rui / Xiao, Rucheng / Huang, Jianyong / Song, Chaolin / Wang, Junyan / Wang, Wei	Study on flexural and shear performance of ultra‐high performance concrete prefabricated pi‐beams	7116-7134
Cao, Kelei / Qiu, Qingming / Huang, Hu / Wang, Chao / Zhang, Changhui / Zhang, Yingying	Study on steel fiber synergistically reinforced cellular concrete explosion‐proof effect in an underwater near‐field environment	7660-7683
Yu, Haitao / Chen, Xizhuo / Sun, Yuqi / Hu, Xiaokun	A unified nonlocal method for capturing discontinuous and multi‐physical behaviors of quasi‐brittle materials	7591-7602

Informations
sur cette fiche
IssueID
71559
Publié(e) le:
14.01.2024
Modifié(e) le:
14.01.2024

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Structural Concrete - v. 24, n. 6 (novembre 2023)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Structural Concrete - v. 24, n. 6 (novembre 2023)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.