Smart Materials and Structures - v. 30, n. 2 (décembre 2020)

Publié:	décembre 2020

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Cortés, Alejandro / Fernández Sánchez-Romate, Xoan Xosé / Jiménez-Suárez, Alberto / Campo, Monica / Prolongo, Margarita G. / Ureña, Alejandro / Prolongo, S. G.	3D printed anti-icing and de-icing system based on CNT/GNP doped epoxy composites with self-curing and structural health monitoring capabilities	025016
Li, Xiaoniu / Yu, De / Cao, Teng / Wen, Zhiyi / Lu, Chunyao / Liu, Wei / Zhu, Chunling / Wu, Dawei	3D printing and dynamic modeling of a polymer-based bimodal piezoelectric motor	025003
Wang, Yuhao / Zhou, Yanfen / Li, Wenyue / Liu, Zhanxu / Zhou, Bangze / Wen, Shipeng / Jiang, Liang / Chen, Shaojuan / Ma, Jianwei / Betts, Anthony / Jerrams, Stephen / Zhou, Fenglei	The 3D printing of dielectric elastomer films assisted by electrostatic force	025001
Boisseau, Sebastien / Tosoni, Olivier / delette, gerard / Alessandri, Baptiste / boucaud, matthieu / bohnke, marc / Despesse, Ghislain / cellier, christophe / Rannou, Fabien / baeza, alexandre / Perrot, Alexandre / daccord, marcel / cessot, stephane / leprince, jerome / vulcano, bruno / bossan, christian	An autonomous switch based on a rotating magnet driven by magnetic launchers	02LT01
Guan, Qinghua / Sun, Jian / Liu, Yanju / Wereley, Norman M. / Leng, Jinsong	Characterization and nonlinear models of bending extensile/contractile pneumatic artificial muscles	025024
Kalita, Victor / Dzhezherya, Yu. I. / Cherepov, S. V. / Skirta, Yu. B. / Bodnaruk, Andrii / Levchenko, Georgiy	Critical bending and shape memory effect in magnetoactive elastomers	025020
Yu, Jianqiang / Dong, Xiaomin / Qi, Song / Wang, Tao / Liang, Yuxuan	Development of a magnetorheological isolator with variable damping and variable stiffness for broadband vibration suppression	025023
Tagiltsev, A. I. / Panchenko, E. Yu / Timofeeva, E. E. / Chumlyakov, Yu. I. / Fatkullin, I. D. / Marchenko, E. S. / Karaman, I.	The effect of stress-induced martensite aging in tension and compression on B2–B19′ martensitic transformation in Ni50.3Ti32.2Hf17.5 high-temperature shape memory alloy	025039
Zhang, Yunfei / Fang, FengZhou / Wang, Lili / Li, Xiaoyuan / Liu, Jiabao / Ye, Zuoyan / Tian, Dong / Huang, Wen / Yu, Miao / Ye, Minheng / Wang, Chao	Effects of functional alkali in magnetorheological finishing fluid	024001
Ding, Lin / Mao, Xiangxi / Yang, Lin / Yan, Bowen / Wang, Junlei / Zhang, Li	Effects of installation position of fin-shaped rods on wind-induced vibration and energy harvesting of aeroelastic energy converter	025026
Fannir, Adelyne / Plesse, Cédric / Nguyen, tran-minh-giao / Vidal, Frédéric	Electro-interpenetration as tool for high strain trilayer conducting polymer actuator	025041
Chen, Haijia / Zhang, Fenghua / Sun, Ya / Sun, Baozhong / Gu, Bohong / Leng, Jinsong / Zhang, Wei	Electrothermal shape memory behavior and recovery force of four-dimensional printed continuous carbon fiber/polylactic acid composite	025040
Hena Zamal, Hasna / Barba, David / Aissa, Brahim / Haddad, Emile / Rosei, Federico	Failure analysis of self-healing epoxy resins using microencapsulated 5E2N and carbon nanotubes	025011
Saleem, Ashraf / Mesbah, Mostefa / Shafiq, Mohammed	Feedback–feedforward control for high-speed trajectory tracking of an amplified piezoelectric actuator	025033
Higueras-Ruiz, Diego R. / Center, Charles J. / Feigenbaum, Heidi / Swartz, Amy Miranda / Shafer, Michael	Finite element analysis of straight twisted polymer actuators using precursor properties	025005
Olivett, Anthony W. / Corrao, Peter / Karami, Amin	Flow control and separation delay in morphing wing aircraft using traveling wave actuation	025028
Feng, Shenyao / Yang, Ping-an / Li, Rui / Wang, Xiaojie / Huang, Xin / Shou, Mengjie	The friction parameter regulation of magnetorheological elastomers by the initial arrangement and evolution of microscopic ferromagnetic particles	025022
Musgrave, Patrick F. / Albakri, Mohammad I. / Phoenix, Austin A.	Guidelines and procedure for tailoring high-performance, steady-state traveling waves for propulsion and solid-state motion	025013
Han, Amy Kyungwon / Hajj-Ahmad, Amar / Cutkosky, Mark R.	Hybrid electrostatic and gecko-inspired gripping pads for manipulating bulky, non-smooth items	025010
Rahmat, Mohd Sabirin / Hudha, Khisbullah / Abd Kadir, Zulkiffli / Amer, Noor Hafizah / Mohamad Nor, Norazman / Choi, Seung-Bok	A hybrid skyhook active force control for impact mitigation using magneto-rheological elastomer isolator	025043
Modir, Alireza / Tansel, Ibrahim N.	Implementation of the surface thickness on additively manufactured parts for estimation of the loading location	025032
Li, Wang / Qi, Song / Zhu, Mi / Xia, Dongbin / Fu, Jie / Yu, Miao	Improving transient magnetorheological response of magnetorheological elastomer by incorporating CIP@FeNi particles	024002
Roupec, Jakub / Michal, Lukáš / Strecker, Zbyněk / Kubík, Michal / Macháček, Ondřej / Choi, Hyoung Jin	Influence of clay-based additive on sedimentation stability of magnetorheological fluid	027001
Zhang, Nan / Zeng, Liang / Lin, Jing / Shao, Yongsheng	A Lamb wave-based crack evaluation method in plate-like structures using specular reflections and tip diffractions	025015
Luo, Bin / Yan, Qiusheng / Huang, Zhanliang / Pan, Jisheng / Fu, Youzhi	Machining method for controlling the behaviours of Bingham fluids in cluster magnetorheological polishing pads	025002
Gan, Ruyi / Qi, Song / Zhao, Yi / Fu, Jie / Li, Shixu / Li, Yaping / Yu, Miao	Magneto-induced Mullins effect of anisotropic MREs under compression mode	024003
Liu, Gaoyu / Gao, Fei / Liao, Wei-Hsin	Magnetorheological damper with multi-grooves on piston for damping force enhancement	025007
Gomes, Antônio Aristófanes da Cruz / Nobre Dantas Grassi, Estephanie / Sales da Silva, Paulo César / de Araújo, Carlos José	MECHANICAL BEHAVIOR OF A NiTi SUPERELASTIC BONE PLATE OBTAINED BY INVESTMENT CASTING ASSISTED BY ADDITIVE MANUFACTURING	025009
Chen, Shengbin / Chen, Dongdong / Fan, Shuli / Huo, Linsheng / Song, Gangbing	Monitoring of viscous damper fluid viscosity using piezoceramic transducers—a feasibility study	025034
Usta, Fatih / Scarpa, Fabrizio / Türkmen, Halit Süleyman / Johnson, PETER / Perriman, Adam / Chen, Yanyu	Multiphase lattice metamaterials with enhanced mechanical performance	025014
Foroughi, Javad / Richards, Christopher / Spinks, Geoffrey / Shepherd, David J. / Kongahage, Dharshika	A new approach to develop, characterise and model actuating textiles	025019
Das, Sourav / Chakraborty, Arunasis / Barua, Ipshita	Optimal tuning of SMA inerter for simultaneous wind induced vibration control of high-rise building and energy harvesting	025027
Zhou, Luonan / Xiaoyang, Zheng / Du, Kai / Guo, Xiaofeng / Yin, Qiang / Lu, Ai / Yi, Yong	Parametric and experiment studies of 3D auxetic lattices based on hollow shell cuboctahedron	025042
Zhao, Sheng / Radhakrishna, Ujwal / Lang, Jeff	Power–bandwidth–voltage interaction in piezoelectric vibration energy harvesters with constrained load voltage	025037
Hua, Dezheng / Liu, Xinhua / Sun, Shuaishuai / Li, Zengqiang / Li, Zhixiong / Li, Weihua	Precise locomotion controller design for a novel magnetorheological fluid robot based on improved gray wolf optimization algorithm	025038
George, Derosh / Madou, Marc J. / Peraza Hernandez, Edwin A.	Programmable self-foldable films for origami-based manufacturing	025012
Yao, Shengda / Wang, Tao / Zhu, Shiqiang	Research on energy consumption of fiber-reinforced fluidic soft actuators	025036
Garnell, Emil / Rouby, Corinne / Doaré, Olivier	Resistivity-induced coupling between voltage distribution and vibrations in dielectric elastomers	025031
Xiao, Yao / Jiang, S. W. / Li, Yanrong / Zhang, Wanli	Screen-printed flexible negative temperature coefficient temperature sensor based on polyvinyl chloride/carbon black composites	025035
Sun, Feifei / Dai, Xiaoxin / Liu, Yue / Xiao, Lei	Seismic mitigation performance of periodic foundations with inertial amplification mechanism considering superstructure-foundation interaction	025018
Lombardi, Giulia / Lallart, Mickaël	Synchronous electric charge and induced current extraction (SECICE): a unified nonlinear technique combining piezoelectric and electromagnetic harvesting	025029
Barbosh, Mohamed / Sadhu, Ayan / Sankar, Girish	Time–frequency decomposition-assisted improved localization of proximity of damage using acoustic sensors	025021
Shahryarifard, Mohammadmahdi / Golzar, Mohammad / Tibert, Gunnar	Toward thermal stimulation of shape memory polymer composite bistable tape springs	025030
Kelley, Christopher Robert / Kauffman, Jeffrey L.	Towards wearable tremor suppression using dielectric elastomer stack actuators	025006
Hou, Hetao / Li, Jinpeng / Chen, Cheng / Qiu, Canxing	Uncertainty analysis of a shape memory alloy model for dynamic analysis	025017
Li, Shiping / Liu, Hu / Zhu, Zicai / Sun, Xiaofei / Tang, Zhenhua / Guo, Yan / Hu, Qiao / Zhang, Yong	Voltage response of three ionic polymer pressure sensors based on ion migration at different ambient humidities	025004
Qin, Yi / Wang, Shuo / Wei, Tiantian / Chen, Ran	A wide band nonlinear dual piezoelectric cantilever energy harvester coupled by origami	025025
Lan, Chunbo / Hu, Guobiao / Qin, Weiyang / Liao, Yabin	A wind-induced negative damping method to achieve high-energy orbit of a nonlinear vibration energy harvester	02LT02

Informations
sur cette fiche
IssueID
54461
Publié(e) le:
23.12.2020
Modifié(e) le:
23.12.2020

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Smart Materials and Structures - v. 30, n. 2 (décembre 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 30, n. 2 (décembre 2020)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.