Smart Materials and Structures - v. 26, n. 12 (décembre 2017)

Publié:	décembre 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Davini, Cesare / Favata, Antonino / Micheletti, Andrea / Paroni, Roberto	A 2D microstructure with auxetic out-of-plane behavior and non-auxetic in-plane behavior	125007
Abdelbarr, Mohamed / Chen, Yulu Luke / Jahanshahi, Mohammad R. / Masri, Sami F. / Shen, Wei-Men / Qidwai, Uvais A.	3D dynamic displacement-field measurement for structural health monitoring using inexpensive RGB-D based sensor	125016
Kattimani, S. C.	Active damping of multiferroic composite plates using 1–3 piezoelectric composites	125021
Jiang, Jing / Zhao, Hongyue / Wang, Lei / Yue, Honghao / Hou, Xuyan	Analysis of influence factors on dust removal efficiency for novel photovoltaic lunar dust removal technology	125025
Christensen, David B. / Basaeri, Hamid / Roundy, Shad	A computationally efficient technique to model depth, orientation and alignment via ray tracing in acoustic power transfer systems	125020
Yoo, Byungseok / Pines, Darryll J.	Development of two-dimensional interdigitated center of pressure sensor	125013
Yang, Tae-Heon / Koo, Jeong-Hoi	Experimental evaluation of a miniature MR device for a wide range of human perceivable haptic sensations	125006
Downey, Austin / Laflamme, Simon / Ubertini, Filippo	Experimental wind tunnel study of a smart sensing skin for condition evaluation of a wind turbine blade	125005
Lee, Junseok / Cha, Youngsu	Flexible printed circuit board actuators	125019
Zhu, Wei / Yang, Fufeng / Rui, Xiaoting	A fully dynamic model of a multi-layer piezoelectric actuator incorporating the power amplifier	125008
De Simone, Mario Emanuele / Ciampa, Francesco / Boccardi, Salvatore / Meo, Michele	Impact source localisation in aerospace composite structures	125026
Azzawi, Wessam Al / Epaarachchi, J. A. / Islam, Mainul / Leng, Jinsong	Implementation of a finite element analysis procedure for structural analysis of shape memory behaviour of fibre reinforced shape memory polymer composites	125002
Hu, G. F. / Damanpack, A. R. / Bodaghi, M. / Liao, W. H.	Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling	125023
McCoul, David / Rosset, Samuel / Schlatter, Samuel / Shea, Herbert	Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators	125022
Karami, Farzad / Tadesse, Yonas	Modeling of twisted and coiled polymer (TCP) muscle based on phenomenological approach	125010
Shamieh, Hadi / Sedaghati, Ramin	Multi-objective design optimization and control of magnetorheological fluid brakes for automotive applications	125012
Teoh, Joanne Ee Mei / Zhao, Yue / An, Jia / Chua, Chee Kai / Liu, Yong	Multi-stage responsive 4D printed smart structure through varying geometric thickness of shape memory polymer	125001
Le Duigou, Antoine / Requile, Samuel / Beaugrand, Johnny / Scarpa, Fabrizio / Castro, Mickael	Natural fibres actuators for smart bio-inspired hygromorph biocomposites	125009
Greiner-Petter, Christoph / Sattel, Thomas	On the influence of pseudoelastic material behaviour in planar shape-memory tubular continuum structures	125024
Darabi, Amir / Ruzzene, Massimo / Leamy, Michael J.	Piezoelectric T-matrix approach and multiple scattering of electroacoustic waves in thin plates	125018
Cui, Jianxun / Adams, J. G. M. / Zhu, Yong	Pop-up assembly of 3D structures actuated by heat shrinkable polymers	125011
Crum, R. S. / Domann, J. P. / Carman, G. P. / Gupta, V.	Propagation and dispersion of shock waves in magnetoelastic materials	125027
Li, Yi / Hashimoto, Minoru	PVC gel soft actuator-based wearable assist wear for hip joint support during walking	125003
Huynh, Thanh-Canh / Kim, Jeong-Tae	Quantification of temperature effect on impedance monitoring via PZT interface for prestressed tendon anchorage	125004
Rao, Jing / Ratassepp, Madis / Fan, Zheng	Quantification of thickness loss in a liquid-loaded plate using ultrasonic guided wave tomography	125017
Deng, Huaxia / Wang, Mingxian / Han, Guanghui / Zhang, Jin / Ma, Mengchao / Zhong, Xiang / Yu, Liandong	Variable stiffness mechanisms of dual parameters changing magnetorheological fluid devices	125014
Hemmatian, Masoud / Sedaghati, Ramin	Vibro-acoustic topology optimization of sandwich panels partially treated with MR fluid and silicone rubber core layer	125015

Informations
sur cette fiche
IssueID
21205
Publié(e) le:
04.12.2018
Modifié(e) le:
03.08.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Smart Materials and Structures - v. 26, n. 12 (décembre 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Smart Materials and Structures - v. 26, n. 12 (décembre 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.