Procedia Structural Integrity - 2017

Publié:	2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ahmed, A. A. / Susmel, L.	Additively Manufactured PLA under static loading: strength/cracking behaviour vs. deposition angle	498-507
Serpieri, Roberto / Albarella, Marco / Alfano, Giulio / Sacco, Elio	Analysis of failure in quasi-brittle materials by 3D multiplane cohesive zone models combining damage, friction and interlocking	441-449
Iacoviello, Francesco / Di Cocco, Vittorio / D'Agostino, Laura	Analysis of the intergranular corrosion susceptibility in stainless steel by means of potentiostatic reactivation tests	269-275
González, J. L. / Gomez, S. / Gómez, G.	Analysis of the mechanical behavior of a delayed coker drum with a circumferentially cracked skirt	33-40
Majid, Fatima / Safe, Mohamed / Elghorba, Mohamed	Burst behavior of CPVC compared to HDPE thermoplastic polymer under a controlled internal pressure	380-386
Nakai, Y. / Shiozawa, D. / Asakawa, N. / Nonaka, K. / Kikuchi, S.	Change of misorientation of individual grains in fatigue of polycrystalline alloys by diffraction contrast tomography using ultrabright synchrotron radiation	402-410
Iacoviello, Francesco / Iacoviello, Daniela / Di Cocco, Vittorio / De Santis, Alberto / D'Agostino, Laura	Classification of ductile cast iron specimens based on image analysis and support vector machine	283-290
Bolzon, Gabriella / Shahmardani, Mahdieh / Liu, Rui / Zappa, Emanuele	A combined experimental-numerical investigation of the failure mode of thin metal foils	168-171
Triantis, D. / Pasiou, E. D. / Stavrakas, I. / Dakanali, I. / Kourkoulis, S. K.	Correlation of pressure stimulated currents and acoustic emissions during 3PB of cement-mortar beams and the role of loading rate	346-353
Funari, Marco Francesco / Greco, Fabrizio / Lonetti, Paolo	A coupled ALE-Cohesive formulation for layered structural systems	362-369
Di Cocco, V. / Iacoviello, F. / D'Agostino, L. / Natali, S. / Volpe, V.	Crack path and damage in a CuZnAl SMA	217-223
Strafella, A. / Coglitore, A. / Salernitano, E.	Creep behaviour of 15-15Ti(Si) austenitic steel in air and in liquid lead at 550°C	484-497
Delfini, A. / Vricella, A. / Bueno Morles, R. / Pastore, R. / Micheli, D. / Gugliermetti, F. / Marchetti, M.	CVD nano-coating of carbon composites for space materials atomic oxygen shielding	208-216
Di Cocco, Vittorio / Iacoviello, Francesco / D'Agostino, Laura / Natali, Stefano	Damage micromechanisms in a hot dip galvanized steel	231-236
D'Agostino, Laura / Di Cocco, Vittorio / Fernandino, Diego O. / Iacoviello, Francesco	Damaging micromechanisms in an as cast ferritic and a ferritized ductile cast iron	201-207
D'Aveni, A. / Fargione, G. / Gugliemino, E. / Risitano, G. / Risitano, A.	Determination of critical stress in high strength concrete	432-440
Markides, Christos F. / Kourkoulis, Stavros K.	The displacement field in an orthotropic disc under parabolic pressure. Application to the case of transverse isotropy	334-345
Testa, Gabriel / Bonora, Nicola / Gentile, Domenico / Carlucci, Antonio / Madi, Yazid	Ductile fracture assessment of X65 steel using damage mechanics	508-516
Di Cocco, Vittorio / Iacoviello, Francesco / Ischia, Gloria	Duplex stainless steels "475°C embrittlement": influence of the chemical composition on the fatigue crack propagation	299-307
Ferro, P. / Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	The effect of residual stress on fatigue behavior of V-notched components: a review	119-125
Nattaj, Jilali / Majid, Fatima / Chaffoui, Hassan / El Ghorba, Mohamed	Estimation of the damage in doubly notched A36 steel specimens, as a function of the reduction rate of Nf under a loading level Δ σ	579-587
Colussi, M. / Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Experimental and numerical investigations of fracture behavior of magnetostrictive materials	153-161
Falaschetti, M. P. / Scafè, M. / Tatì, A. / Troiani, E.	Experimental determination of thickness influence on compressive residual strength of impacted carbon/epoxy laminate	237-245
González, J. L. / Rivas, D. / Beltrán, M. A.	Failure analysis of a diesel engine	41-47
Zucca, G. / di Francesco, V. / Bernabei, M. / De Paolis, F.	Failure Investigation: in Flight Loss of a Main Landing Gear Door of a Transport Aircraft	553-561
Crupi, V. / Guglielmino, E. / Scappaticci, L. / Risitano, G.	Fatigue assessment by energy approach during tensile and fatigue tests on PPGF35	424-431
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Fatigue assessment of steel rollers using an energy based criterion	93-101
Berto, F. / Gallo, P. / Razavi, S. M. J. / Ayatollahi, M. R.	Fatigue behavior of innovative alloys at elevated temperature	162-167
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Fatigue behaviour of notched specimens made of 40CrMoV13.9 under multiaxial loading	85-92
D'Agostino, Laura / De Santis, Alberto / Di Cocco, Vittorio / Iacoviello, Daniela / Iacoviello, Francesco	Fatigue crack propagation in Ductile Cast Irons: an Artificial Neural Networks based model	291-298
Brighenti, Roberto / Carpinteri, Andrea / Artoni, Federico	Fracture toughness of highly deformable polymeric materials	18-24
Paolino, Davide S. / Tridello, Andrea / Chiandussi, Giorgio / Rossetto, Massimo	A general model for crack growth from initial defect in Very-High-Cycle Fatigue	411-423
Iacoviello, Francesco / Di Cocco, Vittorio / Franzese, Ester / Natali, Stefano	High temperature embrittled duplex stainless steels: influence of the chemical composition on the fatigue crack propagation	308-315
Gillani, Syed Shujat-ul-Hussan / Khitab, Anwar / Ahmad, Sajjad / Khushnood, Rao Arsalan / Ferro, Giuseppe Andrea / Kazmi, Syed Minhaj Saleem / Qureshi, Liaqat Ali / Restuccia, Luciana	Improving the mechanical performance of cement composites by carbon nanotubes addition	11-17
Bolzon, Gabriella / Zvirko, Olha	An indentation based investigation on the characteristics of artificially aged pipeline steels	172-175
Iacoviello, Francesco / Di Cocco, Vittorio / D'Agostino, Laura	Integranular corrosion susceptibility analysis in austeno-ferritic (duplex) stainless steels	276-282
González, J. L. / Gomez, S. / Rivas, D.	Integrity assessment and rehabilitation recommendation of the stripper section of a FCC reactor in the creep regime	48-56
Carloni, Christian / Santandrea, Mattia / Wendner, Roman	An investigation on the "width and size effect" in the evaluation of the fracture energy of concrete	450-458
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R. / Mutignani, F.	Mechanical behavior of hot-dip galvanized welded steel under cyclic loading	135-143
Majid, Fatima / Ouardi, Abderazzak / Barakat, Mohamed / Elghorba, Mohamed	Mechanical behavior prediction of PPR and HDPE polymers through newly developed nonlinear damage-reliability models	387-394
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R. / Mutignani, F.	Mechanical behaviour of hot dip galvanized steel connection under cyclic loading	77-84
Lorenzon, Alberto / Antonello, Marco / Berto, Filippo	Megastructures: use of CFD turbulence models for the evaluation of wind-induced fatigue loads	370-379
Kourkoulis, Stavros K. / Dakanali, Ioanna	Monitoring the mechanical response of asymmetrically fractured marble epistyles after restoring their structural integrity	316-325
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Multiaxial fracture of graphite components: a review of recent results	68-76
Vricella, A. / Delfini, A. / Pacciani, A. / Pastore, R. / Micheli, D. / Rubini, G. / Marchetti, M. / Santoni, F.	A new advanced railgun system for debris impact study	545-552
Restuccia, Luciana / Reggio, Anna / Ferro, Giuseppe Andrea / Tulliani, Jean-Marc	New self-healing techniques for cement-based materials	253-260
Gallo, P. / Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Non-localized creep assessment of V-notched components: a review	102-109
Mardalizad, A. / Manes, A. / Giglio, M.	The numerical modelling of a middle strength rock material under Flexural test by Finite Element method-coupled to-SPH	395-401
Cianetti, F. / Alvino, A. / Bolognini, A. / Palmieri, M. / Braccesi, C.	On field durability tests of mechanical systems. The use of the Fatigue Damage Spectrum	176-190
Berto, F. / Marsavina, L. / Razavi, S. M. J. / Ayatollahi, M. R.	On the fracture behavior of polyurethane notched components	144-152
Ståhle, P. / Spagnoli, A. / Terzano, M.	On the fracture processes of cutting	468-476
Beltrán, M. A. / González, J. L. / Rivas, D. / Hernández, F. / Dorantes, H.	On the role of microstructural properties on mechanical behavior of API-X46 steel	57-67
Ferro, P. / Colussi, M. / Meneghetti, G. / Berto, F. / Lachin, M. / Castiglione, S. A.	On the use of the Peak Stress Method for the calculation of Residual Notch Stress Intensity Factors: a preliminary investigation	191-200
Reheman, W. / Ståhle, P. / Durgé, E. / Singh, R. N.	Phase Field Modelling of Formation and Fracture of Expanding Precipitates	477-483
Kourkoulis, S. K. / Triantis, D. / Stavrakas, I. / Pasiou, E. D. / Dakanali, I.	Recording the mechanical response and fracture of marble DENT specimens using modern sensing techniques	326-333
Frigo, Barbara / Fantilli, Alessandro P. / Chiaia, Bernardino	Size effect on fracture toughness of snow	261-268
Di Cocco, Vittorio / Iacoviello, Francesco / D'Agostino, Laura / Natali, Stefano	Sn and Ti influence on damage of bent hot-dip galvanizing phases	224-230
Sesana, Raffaella / Matteis, Paolo	Some comments on mechanical fatigue characterization of steel rails in Standards	459-467
Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Some methods for rapid evaluation of the mixed mode NSIFs	126-134
Campagnolo, A. / Berto, F. / Razavi, S. M. J. / Ayatollahi, M. R.	Some recent criteria for brittle fracture prediction under in-plane shear loading	110-118
Toribio, Jesús	Structural integrity of progressively cold-drawn pearlitic steels: From Raffaello Sanzio to Vincent van Gogh	3-10
Brotzu, A. / De Lellis, G. / Felli, F. / Pilone, D.	Study of defect formation in Al 7050 alloys	246-252
Tocci, Marialaura / Pola, Annalisa / Montesano, Lorenzo / Merlin, Mattia / Garagnani, Gian Luca / Marina La Vecchia, G.	Tensile behavior and impact toughness of an AlSi3MgCr alloy	517-525
Vaysfeld, Nataly / Protcerov, Yuriy	Torsion problems of finite cylinders weakened by ring-shaped cracks	526-544
Domínguez Almaraz, G. M. / Martínez, A. Gutiérrez / Sánchez, R. Hernández / Gómez, E. Correa / Tapia, M. Guzmán / Verduzco Juárez, J. C.	Ultrasonic Fatigue Testing on the Polymeric Material PMMA, Used in Odontology Applications	562-570
Domínguez Almaraz, G. M. / Sánchez, R. Hernández / Martínez, A. Gutiérrez / Gómez, E. Correa / Verduzco Juárez, J. C. / Garza, V. López	Ultrasonic Fatigue Tests on the Nafion Proton Exchange Membrane, Under the Modality of Three Points Bending	571-578
Baer, Wolfram / Wossidlo, Peter	Validation of a low blow specimen technique for R-curve determination using a drop tower	25-32
Lancioni, Giovanni / Donnini, Jacopo / Corinaldesi, Valeria	A variational model for determining fracture modes in FRCM Systems	354-361

Informations
sur cette fiche
IssueID
60052
Publié(e) le:
10.01.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Procedia Structural Integrity - 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Procedia Structural Integrity - 2017

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.