Periodica Polytechnica Civil Engineering - v. 65, n. 2 (2021)

Publié:	2021

Auteur(s)	Titre	Page(s)
Cansız, Sinan	Analytical Estimation of the Residual Drift of Reinforced Concrete Columns under the Ultimate Displacement Capacity
Lógó, Emma / Orbulov, Vanda	Case Study for Product Development Innovation Based on Design Thinking Approach, Demonstrated by Smart Furniture Project
Külekci, Gökhan	Comparison of Field and Laboratory Result of Fiber Reinforced Shotcrete Application
Guo, Chao / Lu, Zhengran	A Comprehensive Research of the Air-void Defect of Concrete-filled Steel Tube
Niş, Anıl / Altındal, İlhan	Compressive Strength Performance of Alkali Activated Concretes under Different Curing Conditions
Kaveh, Ali / Fakoor, Amir	Cost Optimization of Steel-concrete Composite Floor Systems with Castellated Steel Beams
Unal, Alptug / Cengiz, Salih / Kamanli, Mehmet	Effect of Stirrup Spacing and Polypropylene Fiber Ratio on Behavior of Reinforced Concrete Beams
Nayır, Safa / Bahadır, Ümit / Erdogdu, Sakir / Toğan, Vedat	The Effects of Structural Lightweight Concrete on Energy Performance and Life Cycle Cost in Residential Buildings
Yaghoobi, Majid / Sedaghatjo, Mohsen / Alizadeh, Reyhaneh / Karkon, Mohammad	Evaluating the Effect of Asymmetric Cross-section in Free Vibration and Bending Analysis Results of FG Sandwich Beam by Proposing Simple Efficient Element
Hamedi, Gholam Hossein / Sahraei, Ali / Hadizadeh Pirbasti, Mohammad	An Experimental Investigation into the Effect of Asphalt Binder Modified with SBR Polymer on the Moisture Susceptibility of Asphalt Mixtures
Kövesdi, Balázs	Finite Element Model-based Design of Stiffened Welded Plated Structures Subjected to Combined Loading
Kouadjo Tchekwagep, Jean Jacques / Mukhopadhyay, Anol K. / Wang, Shoude / Huang, Shifeng / Cheng, Xin	The Impact of Extended Heat Exposure on Rapid Sulphoaluminate Cement Concrete Up To 120°C
Nosratzehi, Naser / Miri, Mahmoud	Influence of Nano-silica and Crack Width on Corrosion Parameters of Pre-cracked Reinforced Concrete Beams
Khodadadi, Mojtaba / Azarhoosh, Alireza / Khodaii, Ali	Influence of Polymeric Coating the Aggregate Surface on Moisture Damage of Hot Mix Asphalt
Saad, Khaled / Lengyel, András	Inverse Calculation of Timber-CFRP Composite Beams Using Finite Element Analysis
Durmaz, Cagla / Sengoz, Burak / Kaya Ozdemir, Derya / Topal, Ali	Investigation of Different Laboratory Aging Methods of Bituminous Mixtures
Jin, Lei / Zeng, Yawu / Li, Jingjing / Sun, Hanqing	Investigation of the Permeability of Soil-rock Mixtures Using Lattice Boltzmann Simulations
Radhi, Mushtaq Sadiq / Abdul Rasoul, Zainab M. R. / Alsaad, Aymen J.	Mechanical Behavior of Modified Reactive Powder Concrete with Waste Materials Powder Replacement
Abed, Mohammed A. / Alkurdi, Zaher / Kheshfeh, Ahmad / Kovács, Tamás / Nehme, Salem	Numerical Evaluation of Bond Behavior of Ribbed Steel Bars or Seven-wire Strands Embedded in Lightweight Concrete
Kasimzade, Azer A. / Tuhta, Sertac / Günday, Furkan / Aydın, Hakan	Obtaining Dynamic Parameters by Using Ambient Vibration Recordings on Model of The Steel Arch Bridge
Kaveh, Ali / Seddighian, Mohammad Reza	Optimization of Slope Critical Surfaces Considering Seepage and Seismic Effects Using Finite Element Method and Five Meta-Heuristic Algorithms
Asghshahr, Mohammadreza Seify	Reliability Based Design Optimization of Reinforced Concrete Frames Using Genetic Algorithm
Kheyroddin, Ali / Arshadi, Hamed / Khedri, Javad	The Resistance of Fiber-reinforced Concrete with Steel Fibers and CFRP to Drop-weight Impact: Resistance of Fiber-Reinforced Concrete with Steel Fibers and CFRP to Drop-Weight Impact
Győri, Erzsébet / Kussainov, Arman Bulatovich / Szanyi, Gyöngyvér / Gráczer, Zoltán / Raimbekov, Kendebay Zhanabilovich / Togussov, Amangeldi Kurmangazhinovich	The Role of Seismological Networks in Civil Protection in Low and High Seismic Hazards
Zhang, Xuhui / Chen, Zhongxiang / Xia, Yimin / Zhang, Kui	Study on Optimum Free-face Condition of Cutting Hard Rock with Tunnel Boring Machine Hob
Gołaszewski, Jacek / Ponikiewski, Tomasz / Kostrzanowska-Siedlarz, Aleksandra / Miera, Patrycja	Technological aspects of usage of calcareous fly ash as a main constituent of cements
Kamgar, Reza / Majidi, Noorollah / Heidari, Ali	Wavelet-based Decomposition of Ground Acceleration for Efficient Calculation of Seismic Response in Elastoplastic Structures

Auteur(s)

Titre

Page(s)

Cansız, Sinan

Analytical Estimation of the Residual Drift of Reinforced Concrete Columns under the Ultimate Displacement Capacity

Lógó, Emma / Orbulov, Vanda

Case Study for Product Development Innovation Based on Design Thinking Approach, Demonstrated by Smart Furniture Project

Külekci, Gökhan

Comparison of Field and Laboratory Result of Fiber Reinforced Shotcrete Application

Guo, Chao / Lu, Zhengran

A Comprehensive Research of the Air-void Defect of Concrete-filled Steel Tube

Niş, Anıl / Altındal, İlhan

Compressive Strength Performance of Alkali Activated Concretes under Different Curing Conditions

Kaveh, Ali / Fakoor, Amir

Cost Optimization of Steel-concrete Composite Floor Systems with Castellated Steel Beams

Unal, Alptug / Cengiz, Salih / Kamanli, Mehmet

Effect of Stirrup Spacing and Polypropylene Fiber Ratio on Behavior of Reinforced Concrete Beams

Nayır, Safa / Bahadır, Ümit / Erdogdu, Sakir / Toğan, Vedat

The Effects of Structural Lightweight Concrete on Energy Performance and Life Cycle Cost in Residential Buildings

Yaghoobi, Majid / Sedaghatjo, Mohsen / Alizadeh, Reyhaneh / Karkon, Mohammad

Evaluating the Effect of Asymmetric Cross-section in Free Vibration and Bending Analysis Results of FG Sandwich Beam by Proposing Simple Efficient Element

Hamedi, Gholam Hossein / Sahraei, Ali / Hadizadeh Pirbasti, Mohammad

An Experimental Investigation into the Effect of Asphalt Binder Modified with SBR Polymer on the Moisture Susceptibility of Asphalt Mixtures

Kövesdi, Balázs

Finite Element Model-based Design of Stiffened Welded Plated Structures Subjected to Combined Loading

Kouadjo Tchekwagep, Jean Jacques / Mukhopadhyay, Anol K. / Wang, Shoude / Huang, Shifeng / Cheng, Xin

The Impact of Extended Heat Exposure on Rapid Sulphoaluminate Cement Concrete Up To 120°C

Nosratzehi, Naser / Miri, Mahmoud

Influence of Nano-silica and Crack Width on Corrosion Parameters of Pre-cracked Reinforced Concrete Beams

Khodadadi, Mojtaba / Azarhoosh, Alireza / Khodaii, Ali

Influence of Polymeric Coating the Aggregate Surface on Moisture Damage of Hot Mix Asphalt

Saad, Khaled / Lengyel, András

Inverse Calculation of Timber-CFRP Composite Beams Using Finite Element Analysis

Durmaz, Cagla / Sengoz, Burak / Kaya Ozdemir, Derya / Topal, Ali

Investigation of Different Laboratory Aging Methods of Bituminous Mixtures

Jin, Lei / Zeng, Yawu / Li, Jingjing / Sun, Hanqing

Investigation of the Permeability of Soil-rock Mixtures Using Lattice Boltzmann Simulations

Radhi, Mushtaq Sadiq / Abdul Rasoul, Zainab M. R. / Alsaad, Aymen J.

Mechanical Behavior of Modified Reactive Powder Concrete with Waste Materials Powder Replacement

Abed, Mohammed A. / Alkurdi, Zaher / Kheshfeh, Ahmad / Kovács, Tamás / Nehme, Salem

Numerical Evaluation of Bond Behavior of Ribbed Steel Bars or Seven-wire Strands Embedded in Lightweight Concrete

Kasimzade, Azer A. / Tuhta, Sertac / Günday, Furkan / Aydın, Hakan

Obtaining Dynamic Parameters by Using Ambient Vibration Recordings on Model of The Steel Arch Bridge

Kaveh, Ali / Seddighian, Mohammad Reza

Optimization of Slope Critical Surfaces Considering Seepage and Seismic Effects Using Finite Element Method and Five Meta-Heuristic Algorithms

Asghshahr, Mohammadreza Seify

Reliability Based Design Optimization of Reinforced Concrete Frames Using Genetic Algorithm

Kheyroddin, Ali / Arshadi, Hamed / Khedri, Javad

The Resistance of Fiber-reinforced Concrete with Steel Fibers and CFRP to Drop-weight Impact: Resistance of Fiber-Reinforced Concrete with Steel Fibers and CFRP to Drop-Weight Impact

Győri, Erzsébet / Kussainov, Arman Bulatovich / Szanyi, Gyöngyvér / Gráczer, Zoltán / Raimbekov, Kendebay Zhanabilovich / Togussov, Amangeldi Kurmangazhinovich

The Role of Seismological Networks in Civil Protection in Low and High Seismic Hazards

Zhang, Xuhui / Chen, Zhongxiang / Xia, Yimin / Zhang, Kui

Study on Optimum Free-face Condition of Cutting Hard Rock with Tunnel Boring Machine Hob

Gołaszewski, Jacek / Ponikiewski, Tomasz / Kostrzanowska-Siedlarz, Aleksandra / Miera, Patrycja

Technological aspects of usage of calcareous fly ash as a main constituent of cements

Kamgar, Reza / Majidi, Noorollah / Heidari, Ali

Wavelet-based Decomposition of Ground Acceleration for Efficient Calculation of Seismic Response in Elastoplastic Structures

Publicité

Periodica Polytechnica Civil Engineering - v. 65, n. 2 (2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Periodica Polytechnica Civil Engineering - v. 65, n. 2 (2021)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.