Materials and Structures - v. 55, n. 2 (février 2022)

Publié:	février 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Mumand, Fahim / Hikaru, Yonemori / Moriyama, Hitoshi / Shigeishi, Mitsuhiro	Acoustic emission parametric analysis to investigate the damage evolution of anchor systems designed by the concrete capacity design method
Geng, Jiuguang / He, Leilei / Chen, Mingyuan / Niu, Yanhui	Applicability of rheological properties of superabsorbent polymer cement-based materials using apparent viscosity
Albu-Jasim, Q. / Medina-Cetina, Z. / Muliana, A.	Calibration of a concrete damage plasticity model used to simulate the material components of unreinforced masonry reinforced concrete infill frames
Yang, Rui / Wang, Yunyao / Shui, Zhonghe / Gao, Xu / Gu, Qian / Xiao, Rengui / Wang, Zhiyang / Yu, Rui	Chloride binding behaviors of alumina-rich pozzolan-lime mixtures
Benedetti, Andrea / Tarozzi, Mirco	Compressive strength of heterogeneous masonry walls containing blends of brick types
Behera, Prasanna Kumar / Misra, Sudhir / Mondal, K.	Corrosion behavior of bent plain reinforcing bars used in concrete
Guo, Hongda / Xu, Jianyu / Tang, Ziqing / Liu, Qing / Wang, Miaomiao / Liang, Rui / Sun, Guoxing	Effect of super water absorbing polymer based anti-washout admixtures on the properties of seawater-mixed cement paste
Chen, Junhao / Li, Yanlong / Li, Yang / Wen, Lifeng / Guo, Hanyu	Effects of curing conditions with different temperature and humidity on damage evolution of concrete during freeze–thaw cycling
Raavi, Satya Sai Deep / Tripura, Deb Dulal	Evaluating the flexural strength and failure patterns of cement stabilized rammed earth wallettes reinforced with coir, bamboo and steel
Zhou, Fei / Pang, Rui / Zhang, Pu / Cui, Jing	Experimental investigation of the mechanical properties of carbon fiber-reinforced polymer (CFRP) tendons during and after exposure to elevated temperatures
Lejouad, C. / Richard, B. / Mongabure, P. / Capdevielle, S. / Ragueneau, F.	Experimental study of corroded RC beams: dissipation and equivalent viscous damping ratio identification
Hu, Xinyu / Xia, Kang	Experimental study on the permeability of basalt fibre engineered cementitious composite (ECC)
Geng, Kaiqiang / Chai, Junrui / Qin, Yuan / Li, Xiaoli / Duan, Minghan / Liang, Da	Exploring the brittleness and fractal characteristics of basalt fiber reinforced concrete under impact load based on the principle of energy dissipation
Jiang, Bo / Qian, Zhenxu / Pan, Jinlong	Influence of expansive agent and curing method on the mechanical and drying deformation properties of Engineered Cementitious Composites (ECC)
Müller, Dominik / Bujotzek, Lukas / Proske, Tilo / Graubner, Carl-Alexander	Influence of spatially variable material properties on the resistance of masonry walls under compression
Oneschkow, Nadja / Timmermann, Tim	Influence of the composition of high-strength concrete and mortar on the compressive fatigue behaviour
Shah, Vineet / Dhakal, Milap / Scott, Allan	Long-term performance of MgO–SiO2 binder
Provis, John L.	M&S Highlight: Bischoff and Perry (1991), Compressive behaviour of concrete at high strain rates
Isgor, O. Burkan	M&S highlight: Andrade et al. (2004), Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method
Wyrzykowski, Mateusz	M&S highlight: Bažant and Baweja (1995), Creep and shrinkage prediction model for analysis and design of concrete structures—model B3
Provis, John L.	M&S highlight: Constantinides et al. (2003), On the use of nanoindentation for cementitious materials
Feys, Dimitri	M&S highlight: De Larrard et al. (1998) Fresh concrete: A Herschel-Bulkley material
Hofko, Bernhard	M&S highlight: Di Benedetto et al. (2004), Fatigue of bituminous mixtures
Mobasher, Barzin	M&S highlight: Di Prisco et al. (2009), Fiber reinforced concrete: new design perspectives
De Belie, Nele	M&S Highlight: Hearn (1998), Self-sealing, autogenous healing and continued hydration—What is the difference?
Mobasher, Barzin	M&S Highlight: Hillerborg (1985), The theoretical basis of a method to determine the fracture energy GF of concrete
Partl, Manfred N.	M&S highlight: Isacsson and Lu (1995), Testing and appraisal of polymer modified road bitumens—state of the art
Lura, Pietro / Kovler, Konstantin	M&S highlight: Jensen and Hansen (1995), A dilatometer for measuring autogenous deformation in hardening Portland cement paste
Li, Kefei	M&S highlight: Kollek (1989), The determination of the permeability of concrete to oxygen by the Cembureau method—a recommendation
Kovler, Konstantin	M&S highlight: Kovler (1994), Testing system for determining the mechanical behaviour of early age concrete under restrained and free uniaxial shrinkage
Perrot, Arnaud	M&S highlight: Le et al. (2012), Mix design and fresh properties for high-performance printing concrete
Xiao, Jianzhuang / Zhang, Hanghua / de Brito, Jorge	M&S highlight: Limbachiya, et al. (2000), Use of recycled aggregate in high-strength concrete
Isgor, O. Burkan	M&S highlight: Mangat and Molloy (1994), Prediction of long term chloride concentration in concrete
Mobasher, Barzin	M&S highlight: Naaman & Reinhardt (2006), Proposed classification of HPFRC composites based on their tensile response
Leung, Christopher K. Y. / Wan, Kai Tai	M&S Highlight:Leung et al. (2015), Review: optical fiber sensors for civil engineering applications
Hansson, C. M.	M&S highlight—Andrade et al. (1993), Cover cracking as a function of bar corrosion: Part I—experimental test
Kearney, Sarah A.	M&S Highlight—Hansen (1986), Physical structure of hardened cement paste. A classical approach
Goli, Hadi / Latifi, Manouchehr / Sadeghian, Mohammad	Moisture characteristics of warm mix asphalt containing reclaimed asphalt pavement (RAP) or steel slag
Takahashi, Keisuke / Matsui, Kunio / Asamoto, Shingo / Sakamoto, Naoki	Multiscale structural changes and drying shrinkage of Portland cement pastes: effects of a fatty-alcohol-based shrinkage reducing agent
Courtois, Alexis / Taillade, Frédéric / Placko, Dominique	Optimization of sensor location and method analyzing for in-situ monitoring of concrete containment structures: a case involving embedded moisture sensors
Romanazzi, A. / Oliveira, D. V. / Silva, R. A. / Barontini, A. / Mendes, N.	Performance of rammed earth subjected to in-plane cyclic displacement
Yang, Sha / Yang, Yangyiwei / Caggiano, Antonio / Ukrainczyk, Neven / Koenders, Eddie	A phase-field approach for portlandite carbonation and application to self-healing cementitious materials
Hugener, Martin / Wang, Di / Cannone Falchetto, Augusto / Porot, Laurent / Kara De Maeijer, Patricia / Orešković, Marko / Sa-da-Costa, Margarida / Tabatabaee, Hassan / Bocci, Edoardo / Kawakami, Atsushi / Hofko, Bernhard / Grilli, Andrea / Pasquini, Emiliano / Pasetto, Marco / Zhai, Huachun / Soenen, Hilde / van den bergh, Wim / Cardone, Fabrizio / Carter, Alan / Vasconcelos, Kamilla / Carbonneau, Xavier / Lorserie, Aurelie / Mladenovic, Goran / Koudelka, Tomáš / Coufalík, Pavel / Zhang, Runhua / Dave, Eshan / Tebaldi, Gabriele	Recommendation of RILEM TC 264 RAP on the evaluation of asphalt recycling agents for hot mix asphalt
Mirwald, Johannes / Nura, Drilon / Hofko, Bernhard	Recommendations for handling bitumen prior to FTIR spectroscopy
Bao, Chonghao / Xu, Yan / Zheng, Chuanfeng / Nie, Lei / Yang, Xue	Rejuvenation effect evaluation and mechanism analysis of rejuvenators on aged asphalt using molecular simulation
Loporcaro, Giuseppe / Cuevas, Alberto / Pampanin, Stefano / Kral, Milo V.	Strain-ageing effects on the residual low-cycle fatigue life of low-carbon steel reinforcement
Kamakshi, Tippabhotla A. / Reddy, K. Chiranjeevi / Subramaniam, Kolluru V. L.	Studies on rheology and fresh state behavior of fly ash-slag geopolymer binders with silica
Nikvar-Hassani, Arash / Zhang, Lianyang	Synthesis of a CKD modified fly ash based geopolymer cementitious material for enhancing pumpable roof support
Malik, Manisha / Bhattacharyya, Sriman Kumar / Barai, Sudhirkumar V.	Temperature, porosity and strength relationship for fire affected concrete
Medeiros, Wallison Angelim / Parsekian, Guilherme Aris / Moreno, Armando Lopes	Test methodology for determining the mechanical properties of concrete blocks at high temperatures

Informations
sur cette fiche
IssueID
61188
Publié(e) le:
17.02.2022
Modifié(e) le:
17.02.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 55, n. 2 (février 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 55, n. 2 (février 2022)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.