Materials and Structures - v. 49, n. 1-2 (janvier 2016)

Publié:	janvier 2016

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Qian, Z. / Garboczi, E. J. / Ye, G. / Schlangen, E.	Anm: a geometrical model for the composite structure of mortar and concrete using real-shape particles	149-158
Cavalaro, Sergio H. P. / López-Carreño, Rubén / Torrents, Josep María / Aguado, Antonio / Juan-García, Pablo	Assessment of fibre content and 3D profile in cylindrical SFRC specimens	577-595
Tripura, Deb Dulal / Singh, Konjengbam Darunkumar	Behavior of cement-stabilized rammed earth circular column under axial loading	371-382
Handle, Florian / Füssl, Josef / Neudl, Susanna / Grossegger, Daniel / Eberhardsteiner, Lukas / Hofko, Bernhard / Hospodka, Markus / Blab, Ronald / Grothe, Hinrich	The bitumen microstructure: a fluorescent approach	167-180
Bandelt, Matthew J. / Billington, Sarah L.	Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members	71-86
Podolsky, Joseph H. / Buss, Ashley / Williams, R. Christopher / Cochran, Eric	Comparative performance of bio-derived/chemical additives in warm mix asphalt at low temperature	563-575
Matsagar, Vasant A.	Comparative performance of composite sandwich panels and non-composite panels under blast loading	611-629
Forough, Seyed Arash / Nejad, Fereidoon Moghadas / Khodaii, Ali	Comparison of tensile and compressive relaxation modulus of asphalt mixes under various testing conditions	207-223
Somma, Giuliana / Pieretto, Alessandro	Confinement effects on high strength concrete under axial load: evaluation of International Standards prescriptions	57-69
Liu, Zanqun / Li, Xiangning / Deng, Dehua / De Schutter, Geert	The damage of calcium sulfoaluminate cement paste partially immersed in MgSO4 solution	719-727
Babaahmadi, Arezou / Tang, Luping / Abbas, Zareen / Zack, Thomas / Mårtensson, Per	Development of an electro-chemical accelerated ageing method for leaching of calcium from cementitious materials	705-718
Pourbeik, P. / Beaudoin, J. J. / Alizadeh, R. / Raki, L.	Dynamic mechanical thermo-analysis of Portland cement paste hydrated for 45 years	329-340
Muñoz Velasco, P. / Mendívil, M. A. / Morales, M. P. / Muñoz, L.	Eco-fired clay bricks made by adding spent coffee grounds: a sustainable way to improve buildings insulation	641-650
Miljković, Miomir / Radenberg, Martin	Effect of compaction energy on physical and mechanical performance of bitumen emulsion mortar	193-205
Güneyisi, Erhan / Gesoǧlu, Mehmet / Kareem, Qays / İpek, Süleyman	Effect of different substitution of natural aggregate by recycled aggregate on performance characteristics of pervious concrete	521-536
Vélez, William / Matta, Fabio / Ziehl, Paul	Electrochemical characterization of early corrosion in prestressed concrete exposed to salt water	507-520
Snoeck, D. / Priem, B. / Dubruel, P. / De Belie, N.	Encapsulated Phase-Change Materials as additives in cementitious materials to promote thermal comfort in concrete constructions	225-239
Georgiou, Panos / Sideris, Lazaros / Loizos, Andreas	Evaluation of the effects of gyratory and field compaction on asphalt mix internal structure	665-676
Chen, Yu / Chen, Xixiang / Wang, Chaoyang	Experimental and finite element analysis research on I-beam under web crippling	421-437
Bernardi, Patrizia / Michelini, Elena / Minelli, Fausto / Tiberti, Giuseppe	Experimental and numerical study on cracking process in RC and R/FRC ties	261-277
Hao, Yifei / Hao, Hong / Chen, Gang	Experimental investigation of the behaviour of spiral steel fibre reinforced concrete beams subjected to drop-weight impact loads	353-370
Porras, Rocío / Carmona, Jacinto R. / Yu, Rena C. / Ruiz, Gonzalo	Experimental study on the fracture of lightly reinforced concrete elements subjected to eccentric compression	87-100
Bažant, Zdeněk P. / Donmez, Abdullah	Extrapolation of short-time drying shrinkage tests based on measured diffusion size effect: concept and reality	411-420
Suraneni, Prannoy / Bran Anleu, Paula C. / Flatt, Robert J.	Factors affecting the strength of structural lightweight aggregate concrete with and without fibers in the 1,200–1,600 kg/m3 density range	677-688
García, H. / Biezma, M. V. / Cuadrado, J. / Maturana, A.	Fire-resistance industrial portal frames: design with different mechanical properties steels and 35 meters spans	341-352
Triantafillou, T. C. / Choutopoulou, E. / Fotaki, E. / Skorda, M. / Stathopoulou, M. / Karlos, K.	FRP confinement of wall-like reinforced concrete columns	651-664
Allevi, S. / Marchi, M. / Scotti, F. / Bertini, S. / Cosentino, C.	Hydration of calcium sulphoaluminate clinker with additions of different calcium sulphate sources	453-466
Fang, Xing / García, Álvaro / Winnefeld, Frank / Partl, Manfred N. / Lura, Pietro	Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt	487-498
Yerramala, Amarnath / Rama Chandurdu, C. / Bhaskar Desai, V.	Impact strength of metakaolin ferrocement	5-15
Aïssoun, Baudouin M. / Hwang, Soo-Duck / Khayat, Kamal H.	Influence of aggregate characteristics on workability of superworkable concrete	597-609
Coccia, Simona / Imperatore, Stefania / Rinaldi, Zila	Influence of corrosion on the bond strength of steel rebars in concrete	537-551
Soufi, A. / Mahieux, P.-Y. / Aït-Mokhtar, A. / Amiri, O.	Influence of polymer proportion on transfer properties of repair mortars having equivalent water porosity	383-398
Zhang, Jingshu / Wang, Yanzhong / Yao, Yuan / Wu, Shengzhi / Zheng, Fangmeng / Ni, Yongsong	Influence of reinforcement on in-plane mechanical behaviors of CSPRP under cyclic reversed load	101-116
Yüksel, Cihat / Mardani-Aghabaglou, Ali / Beglarigale, Ahsanollah / Yazıcı, Halit / Ramyar, Kambiz / Andiç-Çakir, Özge	Influence of water/powder ratio and powder type on alkali–silica reactivity and transport properties of self-consolidating concrete	289-299
Khoshnazar, Rahil / Beaudoin, James J. / Raki, Laila / Alizadeh, Rouhollah	Interaction of 2-, 3- and 4-nitrobenzoic acid with the structure of calcium–silicate–hydrate	499-506
Zhou, Xinxing / Wu, Shaopeng / Liu, Gang / Pan, Pan	Molecular simulations and experimental evaluation on the curing of epoxy bitumen	241-247
Salehi, Mustafa / Ghods, Pouria / Isgor, O. Burkan	Numerical investigation of the role of embedded reinforcement mesh on electrical resistivity measurements of concrete using the Wenner probe technique	301-316
Colombo, Matteo / Martinelli, Paolo / di Prisco, Marco	On the blast resistance of high performance tunnel segments	117-131
Ben Ali, Fouad / Iucolano, Fabio / Liguori, Barbara / Piscopo, Daniela / Marino, Ottavio / Caputo, Domenico	Physical and mechanical characterization of sun-dried bricks. A case history: the galeb of Kebili	159-165
Jiao, Li-bin / Chen, Da-jun / Feng, Dan-yang / Wang, Xue-min / Zhang, Jian	Potential for significantly improving performances of oil-well cement by soap-free emulsions	279-288
Androjić, Ivica / Dimter, Sanja	Properties of hot mix asphalt with substituted waste glass	249-259
Kim, Gun / Kim, Jin-Yeon / Kurtis, Kimberly E. / Jacobs, Laurence J. / Le Pape, Yann / Guimaraes, Maria	Quantitative evaluation of carbonation in concrete using nonlinear ultrasound	399-409
Breccolotti, M. / Materazzi, A. L.	The role of the vertical acceleration component in the seismic response of masonry chimneys	29-44
Hadi, Muhammad N. S. / Tran, Tung M.	Seismic rehabilitation of reinforced concrete beam–column joints by bonding with concrete covers and wrapping with FRP composites	467-485
Knop, Yaniv / Peled, Alva	Setting behavior of blended cement with limestone: influence of particle size and content	439-452
Tzoura, E. / Triantafillou, T. C.	Shear strengthening of reinforced concrete T-beams under cyclic loading with TRM or FRP jackets	17-28
Xuan, D. X. / Molenaar, A. A. A. / Houben, L. J. M.	Shrinkage cracking of cement treated demolition waste as a road base	631-640
du Plessis, Anton / Olawuyi, Babatunde James / Boshoff, William Peter / le Roux, Stephan Gerhard	Simple and fast porosity analysis of concrete using X-ray computed tomography	553-562
Bru, D. / Baeza, F. J. / Varona, F. B. / García-Barba, J. / Ivorra, S.	Static and dynamic properties of retrofitted timber beams using glass fiber reinforced polymers	181-191
Helal, Yasser / Garcia, Reyes / Pilakoutas, Kypros / Guadagnini, Maurizio / Hajirasouliha, Iman	Strengthening of short splices in RC beams using Post-Tensioned Metal Straps	133-147
Nes, Linn Grepstad / Øverli, Jan Arve	Structural behaviour of layered beams with fibre-reinforced LWAC and normal density concrete	689-703
Najjar, M. F. / Soliman, A. M. / Nehdi, M. L.	Two-stage concrete made with single, binary and ternary binders	317-327
Sapora, Alberto / Cornetti, Pietro / Carpinteri, Alberto / Baglieri, Orazio / Santagata, Ezio	The use of fractional calculus to model the experimental creep-recovery behavior of modified bituminous binders	45-55

Informations
sur cette fiche
IssueID
16645
Publié(e) le:
11.12.2018
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 49, n. 1-2 (janvier 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 49, n. 1-2 (janvier 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.