Materials and Structures - v. 50, n. 1 (février 2017)

Publié:	février 2017

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Nguyen, Quang Tuan / Di Benedetto, Hervé / Sauzéat, Cédric / Nguyen, Mai Lan / Hoang, Thi Thanh Nhan	3D complex modulus tests on bituminous mixture with sinusoidal loadings in tension and/or compression
Tänzer, Ricarda / Jin, Yu / Stephan, Dietmar	Alkali activated slag binder: effect of cations from silicate activators
Maresca, Julia A. / Moser, Paul / Schumacher, Thomas	Analysis of bacterial communities in and on concrete
Colajanni, Piero / La Mendola, Lidia / Latour, Massimo / Monaco, Alessia / Rizzano, Gianvittorio	Analytical prediction of the shear connection capacity in composite steel–concrete trussed beams
Jo, Min-Joo / Noh, Sam-Young	Anchorage length and bond stress-slip model of an untensioned wire strand placed at the interface between a half-PC beam and topping concrete
Prakash, Amar / Srinivasan, S. M. / Rao, A. Rama Mohan	Application of steel fibre reinforced cementitious composites in high velocity impact resistance
Zhutovsky, Semion / Kovler, Konstantin	Application of ultrasonic pulse velocity for assessment of thermal expansion coefficient of concrete at early age
Jena, Naresh K. / Lyne, Åsa Laurell / Arul Murugan, N. / Ågren, Hans / Birgisson, Björn	Atomic level simulations of the interaction of asphaltene with quartz surfaces: role of chemical modifications and aqueous environment
Falchi, Laura / Zendri, Elisabetta / Capovilla, Eleonora / Romagnoni, Piercarlo / De Bei, Massimiliano	The behaviour of water-repellent mortars with regards to salt crystallization: from mortar specimens to masonry/render systems
Lee, Ji-Hyung / Hong, Sung-Gul / Joh, Changbin / Kwahk, Imjong / Lee, Jung-Woo	Biaxial tension–compression strength behaviour of UHPFRC in-plane elements
Gallardo-Heredia, M. / Almanza-Robles, J. M. / Magallanes-Rivera, R. X. / Cortes-Hernández, D. A. / Escobedo-Bocardo, J. C. / Avila-López, U.	Calcium sulfoaluminate cement pastes from industrial wastes: effect of hemihydrate content
Leemann, Andreas / Moro, Fabrizio	Carbonation of concrete: the role of CO2 concentration, relative humidity and CO2 buffer capacity
Bernal, Susan A. / Juenger, Maria C. G. / Ke, Xinyuan / Matthes, Winnie / Lothenbach, Barbara / De Belie, Nele / Provis, John L.	Characterization of supplementary cementitious materials by thermal analysis
González-Fonteboa, Belén / Carro-López, Diego / de Brito, Jorge / Martínez-Abella, Fernando / Seara-Paz, Sindy / Gutiérrez-Mainar, Salvador	Comparison of ground bottom ash and limestone as additions in blended cements
Rodríguez-Alloza, Ana María / Gallego, Juan / Giuliani, Felice	Complex shear modulus and phase angle of crumb rubber modified binders containing organic warm mix asphalt additives
Lakatos, Ákos	Comprehensive thermal transmittance investigations carried out on opaque aerogel insulation blanket
van Hees, Rob / Veiga, Rosário / Slížková, Zuzana	Consolidation of renders and plasters
Köliö, Arto / Pakkala, Toni A. / Hohti, Harri / Laukkarinen, Anssi / Lahdensivu, Jukka / Mattila, Jussi / Pentti, Matti	The corrosion rate in reinforced concrete facades exposed to outdoor environment
Wyrzykowski, Mateusz / Hu, Zhangli / Ghourchian, Sadegh / Scrivener, Karen / Lura, Pietro	Corrugated tube protocol for autogenous shrinkage measurements: review and statistical assessment
Saha, Gourab / Biligiri, Krishna Prapoorna	Cracking performance analysis of asphalt mixtures using response surface methodology: experimental investigations and statistical optimization
Chen, Jie / Kuder, Katherine G. / Lehman, Dawn E. / Roeder, Charles W. / Lowes, Laura N.	Creep modeling of concretes with high volumes of supplementary cementitious materials and its application to concrete-filled tubes
Miranda, Lisandra / Milosevic, Jelena / Bento, Rita	Cyclic behaviour of stone masonry walls strengthened by grout injection
Sánchez, Javier / Andrade, Carmen / Torres, Julio / Rebolledo, Nuria / Fullea, José	Determination of reinforced concrete durability with on-site resistivity measurements
Seo, Chee Ho / Kim, Sang Heon	Development of a method to test the pressurized absorption characteristics of lightweight aggregate
Müller, Philipp / Miccoli, Lorenzo / Fontana, Patrick / Ziegert, Christof	Development of partial safety factors for earth block masonry
Wang, Yue / An, Ming-zhe / Yu, Zi-ruo / Han, Song / Ji, Wen-yu	Durability of reactive powder concrete under chloride-salt freeze–thaw cycling
Aliques-Granero, J. / Tognonvi, T. M. / Tagnit-Hamou, A.	Durability test methods and their application to AAMs: case of sulfuric-acid resistance
Chen, Xudong / Ge, Limei / Zhou, Jikai / Wu, Shengxing	Dynamic Brazilian test of concrete using split Hopkinson pressure bar
Wang, Haibo / Li, Chunlei / Tu, Jin / Li, Deyu	Dynamic tensile test of mass concrete with Shapai Dam cores
Kodur, V. K. R. / Alogla, S. M.	Effect of high-temperature transient creep on response of reinforced concrete columns in fire
Wang, Peng / Dong, Ze-jiao / Tan, Yi-qiu / Liu, Zhi-yang	Effect of multi-walled carbon nanotubes on the performance of styrene–butadiene–styrene copolymer modified asphalt
Mechtcherine, Viktor / Schröfl, Christof / Wyrzykowski, Mateusz / Gorges, Michaela / Lura, Pietro / Cusson, Daniel / Margeson, Jim / De Belie, Nele / Snoeck, Didier / Ichimiya, Kazuo / Igarashi, Shin-Ichi / Falikman, Vyacheslav / Friedrich, Stefan / Bokern, Jürgen / Kara, Patricia / Marciniak, Alicja / Reinhardt, Hans-Wolf / Sippel, Sören / Ribeiro, António Bettencourt / Custódio, João / Ye, Guang / Dong, Hua / Weiss, Jason	Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study
Al-Nimry, Hanan / Jawarneh, Mohammad	Effects of increased slenderness in short heat-damaged RC columns confined with FRP composites
Farouk, Abdulwarith Ibrahim Bibi / Hassan, Norhidayah Abdul / Mahmud, Mohd Zul Hanif / Mirza, Jahangir / Jaya, Ramadhansyah Putra / Hainin, Mohd Rosli / Yaacob, Haryati / Yusoff, Nur Izzi Md.	Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture
Feijoo, J. / Matyščák, O. / Ottosen, L. M. / Rivas, T. / Nóvoa, X. R.	Electrokinetic desalination of protruded areas of stone avoiding the direct contact with electrodes
Di Bella, Carmelo / Wyrzykowski, Mateusz / Lura, Pietro	Evaluation of the ultimate drying shrinkage of cement-based mortars with poroelastic models
Yoo, Doo-Yeol / Banthia, Nemkumar	Experimental and numerical analysis of the flexural response of amorphous metallic fiber reinforced concrete
Illampas, Rogiros / Ioannou, Ioannis / Charmpis, Dimos C.	Experimental assessment of adobe masonry assemblages under monotonic and loading–unloading compression
Sandoval, Cristián / Arnau, Oriol	Experimental characterization and detailed micro-modeling of multi-perforated clay brick masonry structural response
Ravula, Mehar Babu / Subramaniam, Kolluru V. L.	Experimental investigation of compressive failure in masonry brick assemblages made with soft brick
Al-Kamaki, Yaman S. S. / Al-Mahaidi, Riadh / Bennetts, Ian	An experimental investigation of the behaviour of heat-damaged RC columns confined with CFRP fabrics using photogrammetry
Ma, Gao / Huang, Liang / Yan, Libo / Kasal, Bohumil / Chen, Liang / Tao, Chengzhi	Experimental performance of reinforced double H-block masonry shear walls under cyclic loading
Xu, Qingfeng / Chen, Lingzhu / Harries, Kent A. / Zhang, Fuwen / Wang, Zhuolin / Chen, Xi	Experimental study and numerical simulation of long-term behavior of timber beams strengthened with near surface mounted CFRP bars
Zhutovsky, Semion / Hooton, R. Douglas	Experimental study on physical sulfate salt attack
Zhai, Chaochen / Chen, Li / Fang, Qin / Chen, Wensu / Jiang, Xiquan	Experimental study of strain rate effects on normal weight concrete after exposure to elevated temperature
Maya Duque, Luis Felipe / Graybeal, Benjamin	Fiber orientation distribution and tensile mechanical response in UHPFRC
Williams Portal, Natalie / Nyholm Thrane, Lars / Lundgren, Karin	Flexural behaviour of textile reinforced concrete composites: experimental and numerical evaluation
Nath, Pradip / Sarker, Prabir Kumar	Fracture properties of GGBFS-blended fly ash geopolymer concrete cured in ambient temperature
Yan, Changwang / Yang, Deqiang / Ma, Zhongguo John / Jia, Jinqing	Hysteretic model of SRUHSC column and SRC beam joints considering damage effects
Hsieh, Chia-Tsung / Lin, Yiching / Lin, Shu-Ken	Impact-echo method for the deterioration evaluation of near-surface mounted CFRP strengthening under outdoor exposure conditions
Dizhur, D. / Lumantarna, R. / Biggs, D. T. / Ingham, J. M.	In-situ assessment of the physical and mechanical properties of vintage solid clay bricks
Heek, Peter / Ahrens, Mark Alexander / Mark, Peter	Incremental-iterative model for time-variant analysis of SFRC subjected to flexural fatigue
Muñoz-Sánchez, Belén / Arévalo-Caballero, María José / Pacheco-Menor, María Concepción	Influence of acetic acid and calcium hydroxide treatments of rubber waste on the properties of rubberized mortars
Esmaeilkhanian, B. / Diederich, Paco / Khayat, K. H. / Yahia, A. / Wallevik, O. H.	Influence of particle lattice effect on stability of suspensions: application to self-consolidating concrete
Gandía-Romero, J. M. / Ramón, J. E. / Bataller, R. / Palací, D. G. / Valcuende Payá, Manuel / Soto, J.	Influence of the area and distance between electrodes on resistivity measurements of concrete
Herisson, Jean / Guéguen-Minerbe, Marielle / van Hullebusch, Eric D. / Chaussadent, Thierry	Influence of the binder on the behaviour of mortars exposed to H2S in sewer networks: a long-term durability study
Ferreira, Denise / Bairán, Jesús M. / Mari, Antonio	Influence of time-dependent restrained strains in the shear response of RC frames
Tan, Kefeng / Zhu, Jianzhou	Influences of steam and autoclave curing on the strength and chloride permeability of high strength concrete
Du, Wenfeng / Uddin, Nasim	Innovative composite structural insulated panels (CSIPs) folded shell structures for large-span roofs
Dong, Wei / Zhou, Xiangming / Wu, Zhimin / Xu, Bohan	Investigating crack initiation and propagation of concrete in restrained shrinkage circular/elliptical ring test
Roman, C. / García-Morales, M.	Linear rheology of bituminous mastics modified with various polyolefins: a comparative study with their source binders
Pachalla, Sameer Kumar Sarma / Prakash, S. Suriya	Load resistance and failure modes of GFRP composite strengthened hollow core slabs with openings
Le Roy, R. / Le Maou, F. / Torrenti, J. M.	Long term basic creep behavior of high performance concrete: data and modelling
Mo, Kim Hung / Goh, See Heng / Alengaram, U. Johnson / Visintin, Phillip / Jumaat, Mohd Zamin	Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres
Cominelli, Stefania / Giuriani, Ezio / Marini, Alessandra	Mechanisms governing the compressive strength of unconfined and confined rubble stone masonry
Matalkah, Faris / Xu, Liwei / Wu, Wenda / Soroushian, Parviz	Mechanochemical synthesis of one-part alkali aluminosilicate hydraulic cement
Lund, Mia S. M. / Kevern, John T. / Schaefer, Vernon R. / Hansen, Kurt K.	Mix design for improved strength and freeze-thaw durability of pervious concrete fill in Pearl-Chain Bridges
Weigel, S. / Stephan, D.	Modelling of rheological and ageing properties of bitumen based on its chemical structure
Campione, G. / Cannella, F. / Cavaleri, L. / Ferrotto, M. F.	Moment-axial force domain of corroded R.C. columns
Gökçe, H. Süleyman / Sürmelioğlu, Setenay / Andiç-Çakir, Özge	A new approach for production of reactive powder concrete: lightweight reactive powder concrete (LRPC)
Esmaeeli, Hadi S. / Farnam, Yaghoob / Bentz, Dale P. / Zavattieri, Pablo D. / Weiss, W. Jason	Numerical simulation of the freeze–thaw behavior of mortar containing deicing salt solution
Colombo, Matteo / Martinelli, Paolo / di Prisco, Marco	On the evaluation of the structural redistribution factor in FRC design: a yield line approach
Meng, Weina / Valipour, Mahdi / Khayat, Kamal Henri	Optimization and performance of cost-effective ultra-high performance concrete
Dhanya, B. S. / Santhanam, Manu	Performance evaluation of rapid chloride permeability test in concretes with supplementary cementitious materials
Geng, Han / Li, Lihan	A practical shear rate on modified asphalt binders for optimum compaction temperature determination in asphalt mixture design
Ahmed Sbia, Libya / Peyvandi, Amirpasha / Lu, Jue / Abideen, Saqib / Weerasiri, Rankothge R. / Balachandra, Anagi M. / Soroushian, Parviz	Production methods for reliable construction of ultra-high-performance concrete (UHPC) structures
Bhutta, Aamer / Farooq, Mohammed / Zanotti, Cristina / Banthia, Nemkumar	Pull-out behavior of different fibers in geopolymer mortars: effects of alkaline solution concentration and curing
Artoni, Riccardo / Cazacliu, Bogdan / Hamard, Erwan / Cothenet, Alexis / Parhanos, Régis Sebben	Resistance to fragmentation of recycled concrete aggregates
Talha Junaid, M. / Kayali, Obada / Khennane, Amar	Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures
Dalmazzo, Davide / Vercelli, Arianna / Santagata, Ezio / Ruffino, Barbara / Zanetti, Maria Chiara	Rheological characterization and performance-related evaluation of paint sludge modified binders
Wu, Chang / Pan, Zuanfeng / Su, R. K. L. / Leung, C. K. Y. / Meng, Shaoping	Seismic behavior of steel reinforced ECC columns under constant axial loading and reversed cyclic lateral loading
Wu, Feng / Wang, Hai-Tao / Li, Gang / Jia, Jin-Qing / Li, Hong-Nan	Seismic performance of traditional adobe masonry walls subjected to in-plane cyclic loading
Otieno, M.	Sensitivity of chloride-induced corrosion rate of steel in concrete to cover depth, crack width and concrete quality
Wang, Lijie / Van Coile, Ruben / Caspeele, Robby / Taerwe, Luc	Simplified method for evaluating the biaxial capacity of rectangular reinforced concrete columns during fire
Cui, Wei / Ji, Tianzhu / Li, Ming / Wu, Xinli	Simulating the workability of fresh self-compacting concrete with random polyhedron aggregate based on DEM
Ekblad, Jonas / Lundström, Robert	Soft bitumen asphalt produced using RAP
Issa, Camille A. / Assaad, Joseph J.	Stability and bond properties of polymer-modified self-consolidating concrete for repair applications
Jeyaprabha, B. / Elangovan, G. / Prakash, P.	Strength and microstructure of fired mortars with river sand alternatives after air cooling
Gonzalez-Corominas, Andreu / Etxeberria, Miren / Fernandez, Ignasi	Structural behaviour of prestressed concrete sleepers produced with high performance recycled aggregate concrete
Wang, Weiyong / Yan, Shouhai / Liu, Jiepeng	Studies on temperature induced creep in high strength Q460 steel
Rodier, L. / Bilba, K. / Onésippe, C. / Arsène, M.-A.	Study of pozzolanic activity of bamboo stem ashes for use as partial replacement of cement
Xiao, L. / Wei, X.	Study on the hydration parameters in hardening paste, mortar and concrete based on electrical resistivity measurement
Xie, Jian / Chen, Xi / Yan, Jia-Bao / Lei, Guangcheng / Zhu, Limin	Ultimate strength behavior of prestressed concrete beams at cryogenic temperatures
Ju, Taeho / Achenbach, Jan D. / Jacobs, Laurence J. / Guimaraes, Maria / Qu, Jianmin	Ultrasonic nondestructive evaluation of alkali–silica reaction damage in concrete prism samples
Vasanelli, E. / Calia, A. / Luprano, V. / Micelli, F.	Ultrasonic pulse velocity test for non-destructive investigations of historical masonries: an experimental study of the effect of frequency and applied load on the response of a limestone
Fang, Shuai / Lam, Eddie Siu-shu / Wong, Wing-Ying	Using alkali-activated slag ferrocement to strengthen corroded reinforced concrete columns
Alwash, Maitham / Breysse, Denys / Sbartaï, Zoubir Mehdi	Using Monte-Carlo simulations to evaluate the efficiency of different strategies for nondestructive assessment of concrete strength
Maraghechi, Hamed / Salwocki, Stephen / Rajabipour, Farshad	Utilisation of alkali activated glass powder in binary mixtures with Portland cement, slag, fly ash and hydrated lime
Aurangzeb, Qazi / Ozer, Hasan / Al-Qadi, Imad L. / Hilton, Harry H.	Viscoelastic and Poisson's ratio characterization of asphalt materials: critical review and numerical simulations
Ouyang, Jian / Tan, Yiqiu / Corr, David J. / Shah, Surendra P.	Viscosity prediction of fresh cement asphalt emulsion pastes

Informations
sur cette fiche
IssueID
16484
Publié(e) le:
11.12.2018
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Materials and Structures - v. 50, n. 1 (février 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 50, n. 1 (février 2017)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.