Materials and Structures - v. 49, n. 12 (décembre 2016)

Publié:	décembre 2016

Auteur(s)	Titre	Page(s)
Gluth, Gregor J. G. / Rickard, William D. A. / Werner, Steve / Pirskawetz, Stephan	Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire	5243-5254
Magos, Margarida / de Brito, Jorge / Gaspar, Pedro L. / Silva, Ana	Application of the factor method to the prediction of the service life of external paint finishes on façades	5209-5225
Babadopulos, Lucas F. de A. L. / Ferreira, Jorge Luis S. / Soares, Jorge B.	An approach to couple aging to stiffness and permanent deformation modeling of asphalt mixtures	4929-4945
Georgouli, Konstantina / Plati, Christina / Loizos, Andreas	Assessment of dynamic modulus prediction models in fatigue cracking estimation	5007-5019
Bidoung, J. C. / Pliya, P. / Meukam, P. / Noumowe, A. / Beda, T.	Behaviour of clay bricks from small-scale production units after high temperature exposure	4991-5006
Verbruggen, Svetlana / Tysmans, Tine / Wastiels, Jan	Bending crack behaviour of plain concrete beams externally reinforced with TRC	5303-5314
Sun, Hongfang / Memon, Shazim Ali / Gu, Yang / Zhu, Miaochang / Zhu, Ji-Hua / Xing, Feng	Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions	5273-5283
Hardy, Dylan K. / Fadden, Matthew F. / Khattak, Mohammad Jamal / Khattab, Ahmed	Development and characterization of self-sensing CNF HPFRCC	5327-5342
Chen, Qing / Jiang, Zhengwu / Yang, Zhenghong / Zhu, Hehua / Ju, J. Woody / Yan, Zhiguo / Wang, Yaqiong	Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method	5183-5193
Khoshnazar, Rahil / Beaudoin, James J. / Raki, Laila / Alizadeh, Rouhollah	Durability and mechanical properties of C–S–H/nitrobenzoic acid composite systems	5315-5325
Lopez-Arce, P. / Tagnit-Hammou, M. / Menéndez, B. / Mertz, J-D. / Kaci, A.	Durability of stone-repair mortars used in historic buildings from Paris	5097-5115
Zhang, Wuman / Zhang, Ning / Zhou, Yao	Effect of flexural impact on freeze–thaw and deicing salt resistance of steel fiber reinforced concrete	5161-5168
Colotti, Vincenzo	Effectiveness factors for bond strength in FRP shear-strengthened RC beams	5031-5049
Yuan, Huang / Yang, Yang / Deng, Huang / Weijian, Yi / Bo, Peng	Element-based stiffness reduction coefficient of steel–concrete composite beams with interface slip	5021-5029
Foudazi, Ali / Mehdipour, Iman / Donnell, Kristen M. / Khayat, Kamal H.	Evaluation of steel fiber distribution in cement-based mortars using active microwave thermography	5051-5065
Cai, Jian / He, Sheng / Jiang, Zhengrong / Chen, QingJun / Zuo, Zhiliang	Experimental investigation on hysteretic behavior of thin-walled circular steel tubes under constant compression and biaxial bending	5285-5302
Ma, Shaochun / Jiang, Nan	Experimental investigation on the seismic behavior of a new-type composite interior wallboard	5085-5095
Gao, Wan-Yang / Dai, Jian-Guo / Teng, J. G.	Fire resistance design of un-protected FRP-strengthened RC beams	5357-5371
Khaliq, Wasim / Bashir, Muhammad Farrukh	High temperature mechanical and material properties of burnt masonry bricks	5195-5208
Chandrappa, Anush K. / Biligiri, Krishna Prapoorna	Influence of mix parameters on pore properties and modulus of pervious concrete: an application of ultrasonic pulse velocity	5255-5271
Norambuena-Contreras, J. / Thomas, C. / Borinaga-Treviño, R. / Lombillo, I.	Influence of recycled carbon powder waste addition on the physical and mechanical properties of cement pastes	5147-5159
Yu, Linwen / François, Raoul / Gagné, Richard	Influence of steel–concrete interface defects induced by top-casting on development of chloride-induced corrosion in RC beams under sustained loading	5169-5181
Aira, J. R. / Íñiguez-González, G. / Guaita, M. / Arriaga, F.	Load carrying capacity of halved and tabled tenoned timber scarf joint	5343-5355
Bressi, Sara / Dumont, A. G. / Partl, M. N.	A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material	4975-4990
Wang, Yu-Hang / Zhou, Xu-Hong	Non-linear torsion behaviour of concrete filled steel tube columns	5227-5241
Cepuritis, Rolands / Mørtsell, Ernst	Possibilities of improving crushed sand performance in fresh concrete by washing: a case study	5131-5146
Brameshuber, Wolfgang	Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete: Uniaxial tensile test: test method to determine the load bearing behavior of tensile specimens made of textile reinforced concrete	4923-4927
Dadzie, Peter Kessels / Amoah, Martin / Frimpong-Mensah, Kwasi / Oheneba-Kwarteng, Frank	Some physical, mechanical and anatomical characteristics of stemwood and branchwood of two hardwood species used for structural applications	4947-4958
Wang, Yu-Hang / Nie, Jian-Guo / Hu, Hong-Song	Stability of steel–concrete composite beams with full openings in concrete flange	5117-5130
Zamani Beydokhti, Ebrahim / Shariatmadar, Hashem	Strengthening and rehabilitation of exterior RC beam–column joints using carbon-FRP jacketing	5067-5083
Fernandez, Ignasi / Herrador, Manuel F. / Marí, Antonio R. / Bairán, Jesús Miguel	Structural effects of steel reinforcement corrosion on statically indeterminate reinforced concrete members	4959-4973

Auteur(s)

Titre

Page(s)

Gluth, Gregor J. G. / Rickard, William D. A. / Werner, Steve / Pirskawetz, Stephan

Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire

5243-5254

Magos, Margarida / de Brito, Jorge / Gaspar, Pedro L. / Silva, Ana

Application of the factor method to the prediction of the service life of external paint finishes on façades

5209-5225

Babadopulos, Lucas F. de A. L. / Ferreira, Jorge Luis S. / Soares, Jorge B.

An approach to couple aging to stiffness and permanent deformation modeling of asphalt mixtures

4929-4945

Georgouli, Konstantina / Plati, Christina / Loizos, Andreas

Assessment of dynamic modulus prediction models in fatigue cracking estimation

5007-5019

Bidoung, J. C. / Pliya, P. / Meukam, P. / Noumowe, A. / Beda, T.

Behaviour of clay bricks from small-scale production units after high temperature exposure

4991-5006

Verbruggen, Svetlana / Tysmans, Tine / Wastiels, Jan

Bending crack behaviour of plain concrete beams externally reinforced with TRC

5303-5314

Sun, Hongfang / Memon, Shazim Ali / Gu, Yang / Zhu, Miaochang / Zhu, Ji-Hua / Xing, Feng

Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions

5273-5283

Hardy, Dylan K. / Fadden, Matthew F. / Khattak, Mohammad Jamal / Khattab, Ahmed

Development and characterization of self-sensing CNF HPFRCC

5327-5342

Chen, Qing / Jiang, Zhengwu / Yang, Zhenghong / Zhu, Hehua / Ju, J. Woody / Yan, Zhiguo / Wang, Yaqiong

Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method

5183-5193

Khoshnazar, Rahil / Beaudoin, James J. / Raki, Laila / Alizadeh, Rouhollah

Durability and mechanical properties of C–S–H/nitrobenzoic acid composite systems

5315-5325

Lopez-Arce, P. / Tagnit-Hammou, M. / Menéndez, B. / Mertz, J-D. / Kaci, A.

Durability of stone-repair mortars used in historic buildings from Paris

5097-5115

Zhang, Wuman / Zhang, Ning / Zhou, Yao

Effect of flexural impact on freeze–thaw and deicing salt resistance of steel fiber reinforced concrete

5161-5168

Colotti, Vincenzo

Effectiveness factors for bond strength in FRP shear-strengthened RC beams

5031-5049

Yuan, Huang / Yang, Yang / Deng, Huang / Weijian, Yi / Bo, Peng

Element-based stiffness reduction coefficient of steel–concrete composite beams with interface slip

5021-5029

Foudazi, Ali / Mehdipour, Iman / Donnell, Kristen M. / Khayat, Kamal H.

Evaluation of steel fiber distribution in cement-based mortars using active microwave thermography

5051-5065

Cai, Jian / He, Sheng / Jiang, Zhengrong / Chen, QingJun / Zuo, Zhiliang

Experimental investigation on hysteretic behavior of thin-walled circular steel tubes under constant compression and biaxial bending

5285-5302

Ma, Shaochun / Jiang, Nan

Experimental investigation on the seismic behavior of a new-type composite interior wallboard

5085-5095

Gao, Wan-Yang / Dai, Jian-Guo / Teng, J. G.

Fire resistance design of un-protected FRP-strengthened RC beams

5357-5371

Khaliq, Wasim / Bashir, Muhammad Farrukh

High temperature mechanical and material properties of burnt masonry bricks

5195-5208

Chandrappa, Anush K. / Biligiri, Krishna Prapoorna

Influence of mix parameters on pore properties and modulus of pervious concrete: an application of ultrasonic pulse velocity

5255-5271

Norambuena-Contreras, J. / Thomas, C. / Borinaga-Treviño, R. / Lombillo, I.

Influence of recycled carbon powder waste addition on the physical and mechanical properties of cement pastes

5147-5159

Yu, Linwen / François, Raoul / Gagné, Richard

Influence of steel–concrete interface defects induced by top-casting on development of chloride-induced corrosion in RC beams under sustained loading

5169-5181

Aira, J. R. / Íñiguez-González, G. / Guaita, M. / Arriaga, F.

Load carrying capacity of halved and tabled tenoned timber scarf joint

5343-5355

Bressi, Sara / Dumont, A. G. / Partl, M. N.

A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material

4975-4990

Wang, Yu-Hang / Zhou, Xu-Hong

Non-linear torsion behaviour of concrete filled steel tube columns

5227-5241

Cepuritis, Rolands / Mørtsell, Ernst

Possibilities of improving crushed sand performance in fresh concrete by washing: a case study

5131-5146

Brameshuber, Wolfgang

Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete: Uniaxial tensile test: test method to determine the load bearing behavior of tensile specimens made of textile reinforced concrete

4923-4927

Dadzie, Peter Kessels / Amoah, Martin / Frimpong-Mensah, Kwasi / Oheneba-Kwarteng, Frank

Some physical, mechanical and anatomical characteristics of stemwood and branchwood of two hardwood species used for structural applications

4947-4958

Wang, Yu-Hang / Nie, Jian-Guo / Hu, Hong-Song

Stability of steel–concrete composite beams with full openings in concrete flange

5117-5130

Zamani Beydokhti, Ebrahim / Shariatmadar, Hashem

Strengthening and rehabilitation of exterior RC beam–column joints using carbon-FRP jacketing

5067-5083

Fernandez, Ignasi / Herrador, Manuel F. / Marí, Antonio R. / Bairán, Jesús Miguel

Structural effects of steel reinforcement corrosion on statically indeterminate reinforced concrete members

4959-4973

Publicité

Materials and Structures - v. 49, n. 12 (décembre 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Materials and Structures - v. 49, n. 12 (décembre 2016)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.