KSCE Journal of Civil Engineering - v. 19, n. 5 (février 2015)

Publié:	février 2015

Auteur(s)	Titre	Page(s)
Huang, He / Hui, David	Accurate backbone curves for large-amplitude vibrations of imperfect rectangular plate with viscous damping	1438-1444
Habib, Farah / Barzegar, Zahra / Cheshmehghasabani, Maryam	Adjustment comparison of veranda effect on building shadow area in semi-arid and moderate climates	1256-1264
Eom, Jin Ki / Song, Ji Young / Moon, Dae-Seop	Analysis of public transit service performance using transit smart card data in Seoul	1530-1537
Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Drechsler, M.	Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash	1445-1455
James, Oleyiblo Oloche / Cao, Jia-Shun / Kabo-Bah, Amos T. / Wang, Gan	Assessing the impact of Solids Retention Time (SRT) on the secondary clarifier capacity using the State Point Analysis	1265-1270
Jung, Jong-Suk / Song, Sang-Hoon / Jun, Myoung-Hoon / Park, Seong-Sik	A comparison of economic feasibility and emission of carbon dioxide for two recycling processes	1248-1255
Amiri, Gholamreza Ghodrati / Darvishan, Ehsan	Damage detection of moment frames using ensemble Empirical Mode Decomposition and clustering techniques	1302-1311
Cho, Kook-Hwan / Mun, Sungho	Determining hydraulic conductivity parameters of porous asphalt concrete using Bayesian parameter estimation	1277-1281
Park, Hyung Keun / Ock, Jong-Ho	Developing the preliminary cost estimate for the free-form building facade in conjunction with the panel optimization process	1214-1223
Ryou, Jaesuk / Lee, Seungtae / Park, Daewook / Kim, Seongsoo / Jung, Hoseop	Durability of cement mortars incorporating limestone filler exposed to sodium sulfate solution	1347-1358
Lee, Sang-Kyeong / Lee, Byoungkil	Economic analysis of ubiquitous city operation using parametric and non-parametric estimation of the contingent valuation method	1475-1482
Hassan, Siti Roshayu / Zaman, Nastaein Qamaruz / Dahlan, Irvan	Effect of organic loading rate on anaerobic digestion: Case study on recycled paper mill effluent using Modified Anaerobic Hybrid Baffled (MAHB) reactor	1271-1276
Fathi, Mojtaba / Makhdoumi, Akbar / Parvizi, Mehdi	Effect of supplemental damping on seismic response of base isolated frames under near & far field accelerations	1359-1365
Lee, Joo-Ha / Yoon, Young-Soo	The effects of cementitious materials on the mechanical and durability performance of high-strength concrete	1396-1404
Düzgün, Oğuz Akın / Budak, Ahmet	Effects of surface shapes and geotechnical conditions on the ground motion	1336-1346
Tsai, Ming-Kuan	Enhancing post-nuclear temporary housing solutions in Taiwan	1292-1301
Park, Kwan-Soon / Ok, Seung-Yong	Fuzzy gain-tuning approach for active control system adaptable to physical constraints	1468-1474
Zhang, Lian-Ying / Li, Fei	The impact of risk perception on developing incentive systems for relational contracting	1203-1213
Sakthivel, P. B. / Ravichandran, A. / Alagamurthi, N.	Impact strength of Hybrid Steel Mesh-and-Fiber Reinforced Cementitious Composites	1385-1395
Georgoussis, George K.	Inelastic rotational response of single story lateral load resisting structures	1312-1319
Yiğiter, Özlem Ceyhan / Tanyel, Serhan	Lane by lane analysis of vehicle time headways — Case study of Izmir ring roads in Turkey	1498-1508
Shin, Hyun-Seop / Park, Ki-Tae / Lee, Chin-Hyung / Chang, Kyong-Ho / Van Do, Vuong Nguyen	Low temperature impact toughness of structural steel welds with different welding processes	1431-1437
An, Soobae / Ji, Soungmin / Hyun, Changtaek / Han, Sangwon	A model-based productivity improvement of reinforced concrete work in a multi-housing project	1183-1192
Manzur, Tanvir / Yazdani, Nur	Optimum mix ratio for carbon nanotubes in cement mortar	1405-1412
Guangbao, Chen	Parameters calculation for the large open caisson based on quaternion	1492-1497
Ju, Minkwan / Park, Cheolwoo / Hwang, Eui Seung / Sim, Jongsung	Predictability evaluation of the existing punching shear formulas using failure test and probability-based approach	1420-1430
Kim, Jiyoung / Huh, Yong / Kim, Jung Ok / Lee, Jae Bin	Proposal for the generation of network data for pedestrians in South Korea using large-scale maps	1483-1491
Naeem, Usman Ali / Hashmi, Hashim Nisar / Shakir, Abdul Sattar / Ghumman, Abdul Razzaq / Shamim, Muhammad Ali	Ranking sensitive calibrating parameters of UBC Watershed Model	1538-1547
Akıner, İlknur / Akıner, Muhammed E. / Tijhuis, Wilco	A research on environmental rating systems considering building energy performances in different climatic regions of Turkey	1230-1237
Reyes-Salazar, Alfredo / Haldar, Achintya / Rivera-Salas, Juana L. / Bojórquez, Edén	Review of assumptions in simplified multi-component and codified seismic response evaluation procedures	1320-1335
Hwang, J. P. / Jung, M. S. / Lee, C. K. / Jin, S. H. / Ann, K. Y.	Risk of environmental contamination arising from concrete structures, Part I: CO2 emission	1224-1229
Rastogi, Rajat / Harikrishna, M. / Patil, Ajit	Segmentation analysis of domestic tourists — A case study	1509-1522
Lee, Jae-Hoon / Choi, Jin-Ho / Hwang, Do-Kyu / Kwahk, Im-Jong	Seismic performance of circular hollow RC bridge columns	1456-1467
Cheng, Jin / Li, Ying	Simplified method for predicting the deflections of cable-stayed suspension bridges considering live loads	1413-1419
Choi, Jaehyun / Ryu, Han-Guk	Statistical analysis of construction productivity for highway pavement operations	1193-1202
Das, Animesh / Rosauer, Verena / Bald, J. Stefan	Study of road surface characteristics in frequency domain using micro-optical 3-D camera	1282-1291
Kang, Youn-Won / Kim, Jong-Gu / Kim, Yu-Jun / Oh, Seung-Hwoon	A study on the evaluation and improvement for physical elements of Slow Street in the commercial area	1523-1529
Lee, Gwan Gyu	Sustainability assessment of site-scale development projects — Focusing the assessment system based on greenspace gross volume	1238-1247
Shakeri, Aliakbar / Bargi, Khosrow	Use of applied element method for structural analysis	1375-1384
Yassami, Mohammad / Ashtari, Payam	Using fuzzy genetic, Artificial Bee Colony (ABC) and simple genetic algorithm for the stiffness optimization of steel frames with semi-rigid connections	1366-1374

Auteur(s)

Titre

Page(s)

Huang, He / Hui, David

Accurate backbone curves for large-amplitude vibrations of imperfect rectangular plate with viscous damping

1438-1444

Habib, Farah / Barzegar, Zahra / Cheshmehghasabani, Maryam

Adjustment comparison of veranda effect on building shadow area in semi-arid and moderate climates

1256-1264

Eom, Jin Ki / Song, Ji Young / Moon, Dae-Seop

Analysis of public transit service performance using transit smart card data in Seoul

1530-1537

Albitar, M. / Visintin, P. / Ali, M. S. Mohamed / Drechsler, M.

Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash

1445-1455

James, Oleyiblo Oloche / Cao, Jia-Shun / Kabo-Bah, Amos T. / Wang, Gan

Assessing the impact of Solids Retention Time (SRT) on the secondary clarifier capacity using the State Point Analysis

1265-1270

Jung, Jong-Suk / Song, Sang-Hoon / Jun, Myoung-Hoon / Park, Seong-Sik

A comparison of economic feasibility and emission of carbon dioxide for two recycling processes

1248-1255

Amiri, Gholamreza Ghodrati / Darvishan, Ehsan

Damage detection of moment frames using ensemble Empirical Mode Decomposition and clustering techniques

1302-1311

Cho, Kook-Hwan / Mun, Sungho

Determining hydraulic conductivity parameters of porous asphalt concrete using Bayesian parameter estimation

1277-1281

Park, Hyung Keun / Ock, Jong-Ho

Developing the preliminary cost estimate for the free-form building facade in conjunction with the panel optimization process

1214-1223

Ryou, Jaesuk / Lee, Seungtae / Park, Daewook / Kim, Seongsoo / Jung, Hoseop

Durability of cement mortars incorporating limestone filler exposed to sodium sulfate solution

1347-1358

Lee, Sang-Kyeong / Lee, Byoungkil

Economic analysis of ubiquitous city operation using parametric and non-parametric estimation of the contingent valuation method

1475-1482

Hassan, Siti Roshayu / Zaman, Nastaein Qamaruz / Dahlan, Irvan

Effect of organic loading rate on anaerobic digestion: Case study on recycled paper mill effluent using Modified Anaerobic Hybrid Baffled (MAHB) reactor

1271-1276

Fathi, Mojtaba / Makhdoumi, Akbar / Parvizi, Mehdi

Effect of supplemental damping on seismic response of base isolated frames under near & far field accelerations

1359-1365

Lee, Joo-Ha / Yoon, Young-Soo

The effects of cementitious materials on the mechanical and durability performance of high-strength concrete

1396-1404

Düzgün, Oğuz Akın / Budak, Ahmet

Effects of surface shapes and geotechnical conditions on the ground motion

1336-1346

Tsai, Ming-Kuan

Enhancing post-nuclear temporary housing solutions in Taiwan

1292-1301

Park, Kwan-Soon / Ok, Seung-Yong

Fuzzy gain-tuning approach for active control system adaptable to physical constraints

1468-1474

Zhang, Lian-Ying / Li, Fei

The impact of risk perception on developing incentive systems for relational contracting

1203-1213

Sakthivel, P. B. / Ravichandran, A. / Alagamurthi, N.

Impact strength of Hybrid Steel Mesh-and-Fiber Reinforced Cementitious Composites

1385-1395

Georgoussis, George K.

Inelastic rotational response of single story lateral load resisting structures

1312-1319

Yiğiter, Özlem Ceyhan / Tanyel, Serhan

Lane by lane analysis of vehicle time headways — Case study of Izmir ring roads in Turkey

1498-1508

Shin, Hyun-Seop / Park, Ki-Tae / Lee, Chin-Hyung / Chang, Kyong-Ho / Van Do, Vuong Nguyen

Low temperature impact toughness of structural steel welds with different welding processes

1431-1437

An, Soobae / Ji, Soungmin / Hyun, Changtaek / Han, Sangwon

A model-based productivity improvement of reinforced concrete work in a multi-housing project

1183-1192

Manzur, Tanvir / Yazdani, Nur

Optimum mix ratio for carbon nanotubes in cement mortar

1405-1412

Guangbao, Chen

Parameters calculation for the large open caisson based on quaternion

1492-1497

Ju, Minkwan / Park, Cheolwoo / Hwang, Eui Seung / Sim, Jongsung

Predictability evaluation of the existing punching shear formulas using failure test and probability-based approach

1420-1430

Kim, Jiyoung / Huh, Yong / Kim, Jung Ok / Lee, Jae Bin

Proposal for the generation of network data for pedestrians in South Korea using large-scale maps

1483-1491

Naeem, Usman Ali / Hashmi, Hashim Nisar / Shakir, Abdul Sattar / Ghumman, Abdul Razzaq / Shamim, Muhammad Ali

Ranking sensitive calibrating parameters of UBC Watershed Model

1538-1547

Akıner, İlknur / Akıner, Muhammed E. / Tijhuis, Wilco

A research on environmental rating systems considering building energy performances in different climatic regions of Turkey

1230-1237

Reyes-Salazar, Alfredo / Haldar, Achintya / Rivera-Salas, Juana L. / Bojórquez, Edén

Review of assumptions in simplified multi-component and codified seismic response evaluation procedures

1320-1335

Hwang, J. P. / Jung, M. S. / Lee, C. K. / Jin, S. H. / Ann, K. Y.

Risk of environmental contamination arising from concrete structures, Part I: CO2 emission

1224-1229

Rastogi, Rajat / Harikrishna, M. / Patil, Ajit

Segmentation analysis of domestic tourists — A case study

1509-1522

Lee, Jae-Hoon / Choi, Jin-Ho / Hwang, Do-Kyu / Kwahk, Im-Jong

Seismic performance of circular hollow RC bridge columns

1456-1467

Cheng, Jin / Li, Ying

Simplified method for predicting the deflections of cable-stayed suspension bridges considering live loads

1413-1419

Choi, Jaehyun / Ryu, Han-Guk

Statistical analysis of construction productivity for highway pavement operations

1193-1202

Das, Animesh / Rosauer, Verena / Bald, J. Stefan

Study of road surface characteristics in frequency domain using micro-optical 3-D camera

1282-1291

Kang, Youn-Won / Kim, Jong-Gu / Kim, Yu-Jun / Oh, Seung-Hwoon

A study on the evaluation and improvement for physical elements of Slow Street in the commercial area

1523-1529

Lee, Gwan Gyu

Sustainability assessment of site-scale development projects — Focusing the assessment system based on greenspace gross volume

1238-1247

Shakeri, Aliakbar / Bargi, Khosrow

Use of applied element method for structural analysis

1375-1384

Yassami, Mohammad / Ashtari, Payam

Using fuzzy genetic, Artificial Bee Colony (ABC) and simple genetic algorithm for the stiffness optimization of steel frames with semi-rigid connections

1366-1374

Publicité

KSCE Journal of Civil Engineering - v. 19, n. 5 (février 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

KSCE Journal of Civil Engineering - v. 19, n. 5 (février 2015)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.