Journal of Constructional Steel Research - mars 2021

Publié:	mars 2021

Auteur(s)	Titre	Page(s)
Li, Gang / Wang, Wei / Duan, Xuanmeng / Dong, Baiping	Axial load capacity and failure mechanism of flange and ring joints of process piping system	106492
Ahmadi, Zahra / Aghakouchak, Ali Akbar / Mirghaderi, Seyyed Rasoul	Cyclic behavior of moment frames with conventional or slit Infills	106494
Tayyebi, Kamran / Sun, Min	Design of direct-formed square and rectangular hollow section stub columns	106499
Wang, Haitao / Huo, Jingsi / Liu, Yanzhi / Elchalakani, Mohamed / Zhu, Zhengxi	Dynamic performance of composite beam-column connections subjected to impact loadings	106498
González Ureña, Andrés / Tremblay, Robert / Rogers, Colin A.	Earthquake-resistant design of steel frames with intentionally eccentric braces	106483
Al-Kroom, Hussein / Reimer, Andreas / Alghrir, Yassin / Thneibat, Mujahed / Schmid, Volker	Experimental and numerical investigation on the saw-tooth connector subjected to compressive load	106485
Zhang, Wenyuan / Zeng, Lijing	Experimental investigation and low-cycle fatigue life prediction of welded Q355B steel	106497
Xu, Yunpeng / Zhou, Xuhong / Shi, Yu / Zou, Yuxuan / Xiang, Yi / Xu, Lei	Experimental investigation of shear resistance of cold-formed steel framed sheathed walls	106488
Wang, Peijun / Sun, Lele / Zhang, Boxun / Yang, Xiaoxia / Liu, Fangzhou / Han, Zhenlin	Experimental studies on T-stub to hollow section column connection bolted by T-head square-neck one-side bolts under tension	106493
Tao, Yunxiang / Mahendran, Mahen / Ariyanayagam, Anthony	Fire tests of cold-formed steel walls made of hollow section studs	106495
Zheng, Yongqian / Zeng, Shaoxi	Flexural behaviour of stiffened and multi-cell L-shaped CFSTs considering different loading angles	106520
Wu, Chenglong / Liu, Jiming / Wang, Qihui / Mou, Ben / Pan, Wei	Mechanical properties of modular prefabricated steel-concrete composite internal joints under cyclic loading	106463
Laghi, Vittoria / Palermo, Michele / Gasparini, Giada / Girelli, Valentina Alena / Trombetti, Tomaso	On the influence of the geometrical irregularities in the mechanical response of Wire-and-Arc Additively Manufactured planar elements	106490
Mohsenzadeh, Vahid / Wiebe, Lydell	Seismic design of braced frame columns with and without replaceable brace modules	106460
Ghadami, A. / Pourmoosavi, Gh. / Ghamari, A.	Seismic design of elements outside of the short low-yield-point steel shear links	106489
Biscaya, André / Oliveira Pedro, José J. / Kuhlmann, Ulrike	Strength of transversally stiffened I-girders under combined shear and compression	106500
Yousefi, Omid / Narmashiri, Kambiz / Hedayat, Amir Ahmad / Karbakhsh, Ali	Strengthening of corroded steel CHS columns under axial compressive loads using CFRP	106496
Sebbagh, Hichem Rakib / Kerdal, Djamel El Ddine / Abidelah, Anis / Bouchaïr, Abdelhamid	T-stubs with two and four bolts under monotonic and cyclic loading	106486
Yan, Jia-Bao / Chen, Anzhen / Zhu, Jin-Song	Tests and analysis on circular UHPFRC-filled steel tubular stub columns under eccentric compression	106501
Zhu, Yingbo / Wan, Shui / Shen, Kongjian / Zhou, Peng / Wang, Xiao	Theoretical study on the nonlinear performance of single-box multi-cell composite box-girder with corrugated steel webs under pure torsion	106487

Auteur(s)

Titre

Page(s)

Li, Gang / Wang, Wei / Duan, Xuanmeng / Dong, Baiping

Axial load capacity and failure mechanism of flange and ring joints of process piping system

106492

Ahmadi, Zahra / Aghakouchak, Ali Akbar / Mirghaderi, Seyyed Rasoul

Cyclic behavior of moment frames with conventional or slit Infills

106494

Tayyebi, Kamran / Sun, Min

Design of direct-formed square and rectangular hollow section stub columns

106499